H3-WIFI WIFI TouchKey Access Controller > Touch keypad > Waterproof, conforms to IP66 > Metal housing, anti-vandal > Card type: EM Card or Mifare Card > iOS and Android available > Add / Delete users by APP > Can set Time Restriction for users > Temporary Password (One-time Or Period Code) > Support checking Opening Record > Remotely Access (Support 3G/4G/5G) > Multiple Access Modes: Smartphone, Card, PIN > Doorbell Call Notice
H3-BT Bluetooth Touch Keypad > Waterproof, conforms to IP66 > Metal housing, anti-vandal > Card type: EM Card or Mifare Card > iOS and Android available > Add / Delete users by APP > Support checking Opening Record > Support Gateway > Multiple Access Modes: Smartphone, Card, PIN
HF3-WIFI WIFI TouchKey Access Controller > Capacitive Fingerprint Sensor,touch keypad > Waterproof, conforms to IP66 > Metal housing, anti-vandal > Card type: EM Card or Mifare Card > iOS and Android available > Add / Delete users by APP > Can set Time Restriction for users > Temporary Password (One-time Or Period Code) > Support checking Opening Record > Remotely Access (Support 3G/4G/5G) > Multiple Access Modes: Smartphone, Fingerprint, Card, PIN > Doorbell Call Notice
Turkey Starter Feed (T-030424) (Feed from 12-18 Weeks) Vitamin-enriched Turkey Grower Feed is accessible in granule form. Brown in color, this feed provides 4.0% fat, 3.4% fiber and 19.4% protein in their crude form. This fodder contains up to 5.5% insoluble ash. This feed has been produced from ingredients like trace minerals, essential amino acids, soy meal, minerals, wheat based and corn based gluten, toxin binder, DDGS, grains, pulses and mold inhibitors. Offered Turkey Grower Feed has pure vegetarian content and it is accessible in pellet or coarse mash form. Product Details : Crude protein (N x 6.25)� (maximum %) :� 19.4 Crude Fat� (maximum %) :� 4.0 Crude fibre� (maximum %) :� 3.4 Moisture� (maximum %) :� 12 Acid-insoluble ash� (maximum %) :� 5.5 GENERAL DETAILS Ingredients :� Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) : 12 Product Form :� Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :As per IS:2052 Proximate Analysis on Dry Matter Basis We are prominent manufacturers and suppliers of a qualitative range of Turkey Grower Feeds. Our products are widely demanded by clients owing to its high nutritional value and safe consumption. Manufactured under the firm direction of quality controllers these products ensure longer shelf life and effective usage. one can avail these products in various sized packaging. We offer our products at market leading rates.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
> Zinc alloy case > With Tuya Bluetooth, 100 mobile users > 255 users (100 fingerprint + 155 PIN) > PIN length: 4~6 digits > With USB port for emergency power > With Backup mechanical key for emergency override > Support Gateway for remotely access > Alexa and Google Home optional
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power : 3KW Pure sine wave solar inverter Output power factor 1 Built-in 80A MPPT solar charger Built-in anti-dust kit for harsh environment WIFI remote monitoring (optional) Compatible to generator PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Introducing Grade A-Electrolytic COPPER CATHODES (Cu29) Our premium copper cathodes, with a purity level of 99.98% - 99.99%, guarantee exceptional quality for your industrial needs. Sourced responsibly, our products adhere to the highest standards, ensuring reliability and sustainability. Experience the excellence of Congolese copper with us today! Product: Grade A-Electrolytic COPPER CATHODES (Cu29) law 99.98% - 99,99% Packaging: Palletized Sealed By Aluminium Bands. Price Conditions: CIF, in the Port of Destination. Currency/ Money: AMERICAN DOLLAR OF UNITED STATES Country of Origin: Kazakhstan. Contract duration: annual contract, renewable in the same term Total Quantity / Contract: Initial delivery of 5,000 and from the second month 10,000 metric tons per month. We have Reserves, COPPER CATHODES and Exploitation Permits in Kazakhstan., sufficient to supply the amount of Mineral needed, meet delivery targets and dispatch according to monthly schedules. Inspection: Fresh SGS / port access during Laycan SGS assignment every 5,000 mt for quality control. SGS/Alex Stewart Insurance: TBD 100% Payment Condition: FOB, at the port of shipment or departure. Method of payment: SBLC, DLC, LC. The payment instrument must be from a TOP 25 Bank, preferably an American or European Delivery documents: All shipping documents, product certificates, batch numbers, Fresh SGS, delivery schedule will be provided to the buyer at the port of departure.
Product: YELLOW CORN to Animal Consumption Classification: Animal Consumption Purity and Quality Level Game Delivery Format: In bulk Price Conditions: CIF, with delivery to the port of destination. Price: Negotiable Production - Country of BRASIL Contract period: Contract for two years or more, renewable for the same term. Minimum amount: 30,000 metric tons Total Amount / Contract: Sales contract for two years, with initial delivery of 30,000 to 500,000 Metric Tons. We have a large production capacity to meet the scheduled annual deliveries. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Sure: TBD 110% Payment method: Bank Transfer or Letter of Credit SBLC TM799+TM760+TM103, with payment against 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery documents: All product certificates, batch numbers, Fresh SGS, delivery schedule
Classification: MANGANESE Commodity: Manganesium 42% - Bulk Quality/Purity: 42% Price Conditions: FOB Price: Negotiable Origin: BRAZIL, Port of BARCARENA. Duration of Contract: Annual contract, renewable for the same term. Minimum amount: 30.000 MT x Month Total / Contract Quantity: Annual sales contract with initial delivery of 30,000 until reaching 50,000 Metric Tons per month. We have an important Mineral Reserve, we are able to meet the delivery and shipment goals that are scheduled. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Payment method: Direct bank transfer to the Seller's accounts of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery Documents: All product certificates, batch numbers, Fresh SGS, delivery schedule
Product: SOY Classification: FREE GMO / Non-Genetically Modified Organisms Purity and Quality Level: Grade 1, for human consumption Delivery Format: In bulk, in sealed bags Delivery Conditions: CIF, with delivery to the port of destination. Destination: Any Port Price: Negotiable Production - Country of Origin: Brazil Contract duration: Contract for two years or more, renewable for the same term. Minimum Quantity: 30,000 Metric Tons Total Quantity / Contract: Sales contract for two years, with initial delivery of 30,000 to 500,000 Metric Tons. We have a large production capacity to meet the scheduled annual deliveries. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Safe: TBD Payment Condition: FOB, payment at the port of departure or shipment Method of payment: Direct bank transfer to the accounts of the Seller of each load or Letter of Credit SBLC TM799 for the total annual amount of the contract + MT103 paid and discounted against a 100% approved SGS certificate, issued every 10,000 tons at the port of shipment. Delivery documents: All product certificates, batch numbers, Fresh SGS
Product: SUNFLOWER OIL Classification: Non Genetically Modified Organisms (NON - GMO) Purity and Quality Level: Grade 1, for human consumption Delivery Format: In bulk, in sealed drums FLEXI TANK Price and Delivery Condition: CIF, with delivery to the port of destination. Price: Negotiable Production - Country of Origin: Crops from EUROPE, refinery from ASIA Contract period: Contract for two years or more, renewable for the same term. Minimum amount: 30,000 metric tons Total Amount / Contract: Sales contract for two years, with initial delivery of 30,000 to 500,000 Metric Tons. We have a large production capacity to meet the scheduled annual deliveries. Inspection: Fresh SGS / access to the port or collection point requested during the assignment of Laycan SGS every 10,000 mt for quality control Sure: TBD Payment Condition: FOB, at the port of departure Payment method: Direct Bank Transfer or Letter of Credit SBLC MT799/MT760+MT103, with payment against SGS certificate, issued at the port of shipment. Delivery documents: All product certificates, batch numbers, Fresh SGS, delivery schedule