Metal chip press machine introduction: The scrap metal briquetting machine uses hydraulic system to drive the hydraulic cylinder, the output of high pressure will be metal chips, powder and other metal raw materials cold pressed into cylindrical cake, molding at the same time to ensure that the original material remains unchanged. Convenient for storage and transportation, reduce the loss in the recycling process.
1. Descriptions: (1)Raw Material: scrap steel, scrap aluminum, scrap copper (2)BaleShape: cubic, rectangonal, cylind-erial, octagonal, etc. (3)Application Field: steel mills, recycling industries and ferrous metallurgical works. 2. Features: (1) hydraulic-driven ,manual or PLC control. (2)Bale-discharging alternative: Turn-out, side push-out and forward-out. (3) No bolts needed for installation. The diesel engine can be used as power when electric power is unavailable. (4) There are twelve grades of extruding force from 63ton to 2500 ton.
Y81 series of hydraulic baling presses are applied in steel mills, recycling plants, ferrous & non-ferrous smelting industry to press scrap metal (steel, copper, aluminum, stainless steel, discarded automobiles, etc) into acceptable furnace charges in shapes of cuboids, cylinders & octagons. Model:Y81T-160A Bale size:300*300*variable mm
1. Descriptions: (1)Raw Material: scrap steel, scrap aluminum, scrap copper (2)BaleShape: cubic, rectangonal, cylind-erial, octagonal, etc. (3)Application Field: steel mills, recycling industries and ferrous metallurgical works. 2. Features: (1) hydraulic-driven ,manual or PLC control. (2)Bale-discharging alternative: Turn-out, side push-out and forward-out. (3) No bolts needed for installation. The diesel engine can be used as power when electric power is unavailable. (4) There are twelve grades of extruding force from 63ton to 2500 ton.
SMB-F200 automactic Hydraulic Metal baler is suitable for the steel works and the recovery and precess industries, colored and black metal smelt industries. It can ectrude every kinds of metal leftover materials, steel paring, waste copper and waste aluminum into qualified charging such as square column. Technical Specifications: 1) Nominal push force (2000kn) 2) Main cylinder pressure: 1000kn 3) Aux. Cylinder pressure: 2000kn 4) Dimension of compressed room (L*W*H) (mm): 770*900*450 5) Package block dimension (L*W)(mm): ª¦135*400-500) 6) Packgeg block density (kg/m³ ): >2000 7) Production efficiency (kg/h): 600-1000 8) Single cycle time(s): >100 9) Matched> capacity (kW): 18.5 10) Bag coming out / operational method Manual operation.
Side Push-out Series Model Nominal force(kn) Press Box size (L¡ÁW¡ÁH) (mm) Bale size (W¡ÁH) (mm) Bale weight (kg) Production (t/h) Power (kw) Y81T-63 630 1000¡Á600¡Á500 200¡Á200 28~35 0.9~1.1 7.5 Y81T-100 1000 1000¡Á700¡Á550 230¡Á230 42~53 1.2~1.5 11 Y81T-125A 1250 1200¡Á700¡Á600 300¡Á300 65-80 1.2~1.8 15 Y81T-125B 1250 1200¡Á700¡Á600 250¡Á250 50-62 1.2~1.5 15 Y81T-160 1600 1400¡Á900¡Á700 320¡Á320 70-85 1.5~2.2 22 Y81T-160A 1600 1600¡Á1000¡Á800 400¡Á400 110-150 2.0~3.5 22 Y81T-160B 1600 1600¡Á1200¡Á800 400¡Á400 130-180 2.0~4.0 15¡Á2 Y81T-200A 2000 1600¡Á1200¡Á800 450¡Á450 140-190 2.5~4.5 37 Y81T-200B 2000 1800¡Á1400¡Á900 450¡Á450 210-300 3.0~5.0 22¡Á2 Y81T-250A 2500 2000¡Á1400¡Á1000 500¡Á500 230-270 4.0~6.3 22¡Á2 Y81T-250B 2500 2000¡Á1750¡Á1000 500¡Á500 250-280 5.0~6.3 22¡Á2 Y81T-315A 3150 2000¡Á1400¡Á1000 500¡Á500 250-360 4.0~6.5 37¡Á2 Y81T-315B 3150 2000¡Á1750¡Á1000 500¡Á500 260-370 5.0~7.0 37¡Á2 Y81T-400 4000 3000¡Á2000¡Á1200 500¡Á600 250-380 6.0~8.0 45¡Á2 Y81T-500R 5000 2500¡Á1300¡Á800 500¡Á500 300-500 6.0~10.0 22+37. Container.
This T160XL is a kind of Heavy Duty Metal Balers.It is a star in Enerpat Metal Baler Family in a decade.It is born with a 37 kw 415V 50Hz 3 phase SIEMENS motor,Nok Seal rings,Enerpat Rams and Packer Hose. This Side Ejection Baler has a big pressing chamber,so it is perfect for loading more big size scrap metals.Like the steel shavings,scrap steels,scrap aluminium,scrap coppers,scrap stainless steels and so on,all these kinds of metal materials can be made into qualified furnace.And it is equipped with a hand valve control,which makes easy and safety operation for the operators. We use the TOP brands such as the SIEMENS motor drive.And the machine press from three sides,which means the metals can be compacked into a high density bale. Seaworthy package
Copper wire scrap Wire diameter 020mm 025mm 030mm Weight 3kg 5kg 7kg 15kg 20kg Purity999 min Name Copper wire scrap Millberry 9978 Item Standard Results Purity 9978 999 Carbon 003 003 Coblet 0001 00009 Iron 0005 0005 Phosphorus 001 0009 Sulphur 001 0009 Zinc 0003 0003 Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999 Cu 999 Element0005 Copper9999 Min Lead0005 Max Bismuth05 Max Total impurities03 Max Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94 Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch Shall consist of clean untinned uncoated unalloyed copper wire and cable not smaller than No 16 B S wire gauge free of burnt wire which is brittle
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details. Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%. Type: HMS Scrap Composition: iron Scrap Metal Application: Melting HMS Type: HMS1 & 2 Packaging Details: Bulk and Customers preferences d) All scraps shall be free of explosive and oily materials and woody substance in any event. e) Packing arrangement: In break bulk.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Product name Iron scrap Type Casting iron, Iron scrap Metal 100% Alloy or not Non-alloy Secondary or not Non-secondary
Hms #1, steel turnings, p&s 5, manganese 12% and 15%, disk and drums , prepared cast iron scrap.Fob, cif
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
scrap metal baling machine 1. Application: Y81 series hydraulic scrap metal baler is used in steel foundry, recycling companies, ferrous & non-ferrous smelting industries. It can press metal scrap into required shapes (cuboid, cylinder, octagon etc.) to reduce the storage space, transportation cost and moreover with the higher density, it will help the scrap melting in furnace to reduce the furnace consumption. 2. Features a) Various models with different press force (60 to 2000 tons) to fullfil specific demands; custom design for your specific request. b) Easy installation, all Y81 series need is a flat ground. c) It can be electrical or diesel; it can be manual lever operation or full automatic operation, moreover it can be remote control. d) Hardox wear plates give it a longer life to deal with different kinds of scrap.
Baling chamber: 40" x 48" x 84" (h x w x l) Bale size: 20" x 20" x 10-20" (h x w x l) Electric motor : 2 x 40 h.P. 3 phase 1440 rpm Body : fabricated Oil drive : gear cum plunger pump Working liquid : hydro/enclo- 68 (not in our scope) Force on lid cyclinder : 120 tons (60 x 2) Force on main cylinder : 200 tons (100 x 2) Force on side cyclinder : 170 tons Thickness of the pressure plate : 24" Force on ejector cyclinder : 12 tons Type of ejection : top ejection Working pressure : 3300 PSI Hard liner plates : provided Shearing blades : provided Starters : provided 2 nos. Weight of the bale : 150 - 240 kgs. Idle cycle time : 100 seconds (approx) Weight of the machine : 25 tons (approx) Oil tank capacity : 1800 lts. Operation : by control desk with plc control second valves.
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Chemical Composition: C:0.06 â?? 0.082% Mn:0.75 â?? 1.05% SI:0.13 â?? 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading