Scale Inhibitors Suppliers and Manufacturers

ATMP, HEDP, EDTMPA, PBTC, PAPA etc. We have various kinds of scale inhibitors, tell us what you need and we will provide it with good quality.

Characters Comply with the ANSI/NSF Standard 60 standard; Comply with China drink water certificate; Effectively applied to the DOW Chemical Companys Filmtec membranes & the Nitto Denko companys RO membranes; Compatible with organic flocculants and ST Suitable for water with high hardness, high alkaline,high pH.Effectively control the deposition of carbonate, sulfate,calcium fluoride & dispersed metal oxide on the surface of the membrane; pH range: 5.0-9.0; Physical Properties Appearance:Colorless to Light yellow liquid; Density(20):1.20 ±0.05g/cm3 pH(1.0%):1.5~3.5 Solubility:completely soluble in water

Introduction to the product CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system. Method of use The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.

Characters ·Comply with the ANSI/NSF Standard 60 standard; ·Comply with China drink water certificate; ·Effectively applied to the DOW Chemical Companys Filmtec®membranes & the Nitto Denko companys RO membranes; ·Compatible with organic flocculants and ST ·Suitable for water with high hardness, high alkaline,high pH.Effectively control the deposition of carbonate, sulfate,calcium fluoride & dispersed metal oxide on the surface of the membrane; ·pH range: 5.0-9.0; Physical Properties Appearance:Colorless to Light yellow liquid; Density(20):1.20±0.05g/cm3 pH(1.0%):1.5~3.5 Solubility:completely soluble in water

Model number LF-16L-30T-1 Specifications 75*57*112mm Food grade MSAP bioactive molecular scale inhibition technology, highly effective scale inhibition, protect the water heater from scaling, improve thermal efficiency, Extend the life of the water heater; 17L / min super-large water consumption, meet the domestic water heater, boiler water consumption;40μm fine filter, made of SS316L stainless steel, filtering impurities such as suspended matter and particles; The filter element is more durable, the amount of clean water can reach 30 tons, and the replacement is convenient;The bottle body is made of transparent modified secret formula material, and the bottle cap is made of healthy and environmentally friendly copper, which is strong and explosion-proof;

Scale cum corrosion inhibitor for Boiler Price of product ( USD price or FOB price) : Contact Anglo Gulf FZCO sales representatives Product Origin : UAE Key Specifications/Special Features : pH : 5-7 Sp.Gvty: 1.0-1.2 Minimum Order Size and Packgaing details : MOQ: 1 ton Packaging: Jerry Cans/Drums

Product Introduction Application The products mainly compound with PBTCA, organophosphorus, Sulfonate copolymer, corrosion inhibitor, and it was alkaline formula. Widely used, and donâ??t add acid and non-toxic. It has good anti-corrosion on carbon steel and superior corrosion inhibition on copper and stainless steel. Also it was specialized developed for chemical plant. Features 1. Scope of application: 7.8-9.5, have good scale inhibition and corrosion inhibition effect. And no need to add the acid. 2. Especially suitable for medium hardness, medium basicity chemical plant cooling water system; 3. Excellent anti scale and corrosion inhibition effect. Specification Item Index Appearance Slight yellow transparent liquid Solid content >30% Specific gravity >=1.15 PH

Demulsified, corrosion inhibitor, scale inhibitor, biocide.

Polyacrylic acid (paa) Cas: 9003-01-4 Properties: Paa is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Usage: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Keywords: paa Related products: polyacrylic acid (paa) Polyacrylic acid sodium (paas) Polyhydric alcohol phosphate ester (pape) Package and storage: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.

HEDP is an organphosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. 250kg Plastic Drum, IBC.

Atmpòna5 is the salt of atmp, it can inhibit calcium carbonate particularly in water treatment system . Atmpòna5 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system . Atmpòna5 is a general low cost scale inhibitor, it has good corrosion inhibition to zinc salt and phosphate, its chelating ability is good as well. Normally in 250kg net plastic drum, ibc drum can also be used as required. Storage for ten months in room shady and dry place.

Dequest 2016 is the sodium salt of dequest 2010, hedp.Na4 is an good scale inhibitor for calcium carbonate, it can be used in low pressure boiler water system, circulating water system, industrial and municipal cleaning water system and swimming pool. The solid hedp.Na4 is white powder, soluble in water, easily deliquescence, suitable for use in winter and freezing districts. It is a kind of organophorphonic acid scale and corrosion inhibitor, can form stable complex with fe, cu and zn ions, it can dissolve the oxides on metal surface, it has good scale and corrosion inhibition effect under 250. Hedp.Na4 is widely used in circulating cool water system, medium and low pressure boiler, oil field water pipelines as scale and corrosion inhibitor in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, hedp.Na4 is used as detergent for metal and nonmetal. In dyeing industry, hedp.Na4 is used as peroxide stabilizer and dye-fixing agent; in non-cyanide electroplating, hedp.Na4 is used as chelating agent. For liquid: normally in 250kg net plastic drum, ibc drum can also be used as required. For solid: inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.

ííatmp is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. Atmp can be used in many different circulating cool water system. The dosage of 1-20mg/l is recommended. As corrosion inhibitor, the dosage of 20-60mg/l is preferred. Appearance Water white to pale yellow liquid Active acid (%) 48.0 - 52.0 Chloride (as cl, %) 1.0 max Ph(1% solution)@20oc 2.0 max Specific gravity @20/20oc 1.330 min Iron, as fe (ppm) 20.0 max Colour apha(hazen) 125 max Appearance Water white to pale yellow liquid Active acid (%) 48.0 - 52.0 Chloride (as cl, %) 1.0 max Ph(1% solution)@20oc 2.0 max Specific gravity @20/20oc 1.330 min Iron, as fe (ppm) 20.0 max Colour apha(hazen) 125 max

Appearance Brown liquid Active acid (%) 48.0 - 52.0 Ph(1% solution)@25ípc 2.0 max Sp. Gravity @20/20ípc 1.350- 1.450 Chloride (as cl, %) 15.0 - 17.0 Sequestrant value (caco3) mg/g 450 min Iron, (as fe, ppm) 35 max

Bath scale inhibitor purifier.Transportation