Model:S278 Name: Cellular IoT Modbus Gateway The Cellular IoT Modbus Gateway is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, integrated 1 Industrial 10/100M adaptive Ethernet module inside and inbuilt industrial Cellular module. It provides 4 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, and RS485 serial port, performs as Modbus RTU Master Supports extend maximum 320 mapping registers. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically. The Cellular IoT Modbus Gateway supports transparent data transmission and performs as Modbus Slave over GPRS/3G/4G/NB-IoT network and RS485 serial port. Moreover, the Cellular IoT Modbus RTU can be used as Modbus RTU Master to reading smart meters, I/O modules, PLC, and converts to SMS alert once triggered the threshold value, or transmit data to remote server over GPRS/3G/4G/NB-IOT network. Main Features� 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM® Cortex�-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 4 digital inputs, compatibles dry and wet contact, one of it can be used as pulse counter; 8. 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs; 9. 1 ambient sensor input for monitoring onsite temperature and humidity; 10. Inbuilt inter-lock logic programmer and powerful timer program function; 11. Resend the data while communication failure and alert to users by SMS; 12. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 13. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 14. Integrated 1 Industrial 10/100M adaptive Ethernet module inside, supports Modbus TCP; 15. 1 RS485 port supports Modbus RTU Master, supports max. 320 mapping registers, can be used to extend I/O ports or meters; 16. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 17. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 18. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 19. Inbuilt 4M internal memory to save historical data and events; 20. Inbuilt large capacity automatically rechargeable backup battery;
S275 is a 4G RTU with IIoT data acquisition remote monitoring and control SMS alarm functions it is widely used in remote data acquisition and monitoring of various industries such as smart grid smart transportation industrial automation smart building firefighting public safety environmental protection meteorology digital medical agriculture forestry water coal mining petrochemical and other fields 8 digital input 4 relay output 6 analog input and 1 temperaturehumidity input 1 RS485 serial port Modbus RTU MasterSlave can expand multiple Modbus Slave devices Max 320 data points Embedded TCPIP stack supporting Modbus RTU Modbus TCP and transparent transmission Builtin powerful telephone and SMS alarm function regular reporting abnormal upper and lower limit alarm Local logic control of the device linking relay outputs based on monitoring of digital input and analog value thresholds Antidropout mechanism to ensure the device always online and it comes with data retransmission function Support remote configuration remote management and remote restart by SMS Builtin powerful timer function support timed automatic reporting timed daily SMS timed online timed offline timed restart timed execution relay output etc
The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. Supports 10 user numbers for receiving device daily reports, dropped calls, serial port data overrun, and specific SMS alarm messages triggered abnormally; Built-in powerful timer function, support timing automatic reporting, timing SMS daily report, timing online, timing restart and other functions; Modbus TCP protocol and Modbus RTU protocol are compatible with transparent transmission; Ethernet comes with a transformer isolator, 2KV electromagnetic isolation, and shell isolation protection; Adopt time division multiplexing, multi-channel mounting, less interference, more mounting nodes, can support up to 99 temperature and humidity collection points It can monitor the terminal battery level in real time to ensure that the device data does not drop.
The Dual Sim card Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
1.Modbus-RTU protocol to HART protocol 2.Support 6 device variables and 4 dynamic variables 3.Support Modbus communication parameters dynamic configuration 4.Support HART multipoint mode 5.Support 375/475 communicator
Industrial 4G IoT Gateway Amarok is a powerful and stable operation, a cost-effective product designed to meet the needs of industrial users through 4G/3G signal wireless internet access. Because of its open source platform-based features, it can also be used as an integrated platform for extension such as developers, makers, and IoT integration development. 300Mbps (2.4G) + 867Mbps (5G) Combined Wi-Fi Speed 5 x Gigabit Ports PCIe 4G LTE Modem 128GB Max MicroSD Supports MU-MIMO
R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU/TCP Master to collect data, convert Modbus to MQTT protocol, Transmit Transparently (Pass-through), and directly connect to cloud platforms such as AWS\THINGSBOARD etc.
MODBUS-RTU master station, comply with MODBUS-RTU protocol Electrical interface connected with Modbus device supports TTL level Set MODBUS-RTU slave station via parameters provided by GSD file Company Information Microcybers production center is 1700m2, with anti-static ground, ventilating system, air source transporting system, temperature and humility control system and production devices. The production center consists of 4 workshops and 1 professional lab, they are: production workshop, assembly workshop, ageing workshop, maintenance workshop and product lab. There are professional production line, pressure transmitter assembly line, instrument assembly line, control system module assembly line and product testing line. Microcyber has the batch capacity for 10 thousand devices per year.
DC POWER INPUT 9-30V Wide DC input @1A (non-isolated) Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected. Internal Overvoltage, Over current protection Internal circuitry to enable remote power ON/OFF of 12V rail. Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE Based on Sierra Wireless Module LTE CAT4 cellular connectivity with UMTS/GPRS fallback ï?·Following key features of the Module 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41 3G UMTS/HSPA+: B1/ B8 2G EDGE/GSM/GPRS: 900/ 1800 MHz Interfaces Two SMA connectors for External Main and Diversity Antennas Single Nano SIM USB INTERFACE Micro USB interface for connecting Host. Enumerate like ECM port GPS Supports RF bands of GPS, GLONASS, Galileo, BeiDou SMA connector for External Antenna Supports active or Passive by assembly option 3.7V at 20mA available for supporting active antenna 10/100 ETHERNET INTERFACE One 10/100 Ethernet Interface ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected. Connection by means of standard RJ-45 connector STORAGE SD Card socket for Internal Data storage
INTERFACES DC POWER INPUT 10-30V Wide DC input @1A (non-isolated) Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected. Internal Overvoltage, Over current protection Internal circuitry to enable remote power ON/OFF of 12V rail. Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE â?¢ Based on Sierra Wireless Module â?¢ LTE CAT4 cellular connectivity with UMTS/GPRS fallback Following key features of the Module o 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41 o 3G UMTS/HSPA+: B1/ B8 o 2G EDGE/GSM/GPRS: 900/ 1800 MHz Interfaces o Two SMA connectors for External Main and Diversity Antennas o Single Nano SIM USB INTERFACE Micro USB interface for connecting Host. GPS Supports RF bands of GPS, GLONASS, Galileo, BeiDou â?¢ SMA connector for External Antenna (Main and Diversity) â?¢ Supports active or Passive GPS Antenna by assembly option â?¢ 3.7V at 20mA available for supporting active antenna RS-485 â?¢ 3KV isolated Half duplex RS-485 channel â?¢ ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected. Connection by means of screw terminal connectors EMMC FLASH 4GB eMMC flash for Internal Data storage
Product Overview G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station. Features Be tallied with HART7.0 HART master and Modbus slave mode 4~20mA analog signal overlay HART digital signal Support 15 HART slave device Configure gateway by special software Write protect user data RS485 Modbus interface LED power and communication indicating Standard DIN rail installation
Provide FF H1 communication ability to Modbus device Support standard DD or EDD specification (FF H1) Electrical interface connected with Modbus device supports TTL level, RS485 and RS232 G0313 Modbus to FF Gateway is a gateway device of Modbus protocol and FF protocol developed by Microcyber. As Modbus master station, G0313 Modbus to FF Gateway communicates with Modbus-RTU device via RS485 interface, and it can convert the data of Modbus-RTU device to FF device variable output. G0313 Modbus to FF Gateway size is 99Ã?22.5Ã?114.5mm, and supports standard DIN rail installation. There is a 3-bit DIP switch for G0313 Modbus to FF Gateway, shown as the following Figure. SIM: Simulation switch, used for simulation function. WP: Write protection, all the write operation for FF smart pressure transmitter shall be refused, which avoid data modification at random. RST: Reset, reset device date to factory original. Power off the device at first, and made the switch at ON, and then power on the device, the device shall be reset to factory original. Modbus to FF gateway is a gateway device supporting Modbus and FF protocol. As FF device, it can communicate with Modbus devices, read Modbus data to FF device by simply configuration, and transfer data to control system through FF bus. Modbus to FF Gateway supports 4 Modbus slave devices, 8 groups of analog input output and discrete input output parameters, totally 32 channels provided. It configures Modbus devices data into transducer blocks parameters via Modbus register, and provides data support for FF system via channels between variables and AI, AO, DI and DO function blocks.
Enerna IoTech WIFI Smart Automation Home Care Security Alarm System Gateway have built in battery, work with smart socket, accessories and cameras. It support scheduled Arm/Disarm function, support Alexa, Tmall Wizard, google Assistant. Work with camera to motion detection recording & taking pictures, you can get alarm notification in time. Appliance control function bring us the more smart and comfortable life. Enerna IoTech WiFi Smart Automation Home Care Alarm IoT Gateway. The siren gateway can be linkage to Water & gas valve control and sockets...for home appliance controlling. It support wireless security detectors and cameras for video monitoring. Enerna IoTech Smart Building Automation Home Care Security Alarm System IoT Gateway Description: Enerna IoTech WiFi Automatic IoT Alarm Gateway with Wireless Temperature Sensor Detectors. The IoT gateway can link to cameras for video and photo remote monitoring. It support different wireless sensors for home security or kids elderly emergency SOS helper. Enerna IoTech Smart Home Security IoT Alarm Gateway Connect to Wireless Detectors and Automatic Linkage with Other Intelligent Devices. The IoT gateway support different wireless sensors and smart switch for home appliance. In addition, the smart detectors and sensors linkage to each other with platform to work together.For example, detect the water leakage for wooden floor and switch the water&gas valve controller automatically. Enerna IoTech WIFI Smart Automation Home Care Security Alarm IoT Gateway Features: Based on the TUYA smart home platform, work with most of the TUYA smart based smart products. On-site high-decibel alarm, flashing lights and other alarm modes. Home Arm, Away Arm, Disarm Low-battery detection System power off detection. Tamper detection. Built-in battery. Support Amazon Alexa,Google Assistant.
The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc. 1. Can be used as a complete product or as a secondary development module; 2. Two working modes are available: Normal mode: Real-time data transmission,Users can inquiry the real-time status; Low power consumption mode: Ultra low power consumption(ï¼?230uA); 3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc; 4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network; 5. Support configure parameters and query real-time data via SMS,software,cloud platform; 6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message; 7. Support two different server centers,can set IP address or domain name ; 8. Support Modbus RTU over TCP and MQTT protocol; 9. Wide range power supply 7~24VDC with phase-reversal protection; 10. Using Nano sim card,support PIN code function; 11. Provide PCBA or waterproof enclosure,can be used outside.
With the support of diligent team of professionals, R S Enterprises is known as a leading manufacturer, supplier, exporter and trader of Water Purifier Plant, Water Softener, RO System Spare Part, Solar Lamp, Water Demineralizer, Solar Panel and many more. We also render highly reliable and effective RO System Installation Service to the customers. We have started our business in the year 2010 as a partnership based company at Chennai in Tamil Nadu, India. Our products are highly appreciated among the customers for their high reliability, advance technology, hassle free performance, excellent finishing, less maintenance requirement, long service life and various other features. Moreover, we use high grade inputs, advance technology and innovative ideas of our skilled technician in the manufacturing of these products. Our dedicated team of skilled professionals enables us to deliver the bulk consignments of customers on time with maintaining world class standards in our products. Our exporting countries are East Asia, North Asia, South Asia, Germany and Indian Subcontinent.
Item Code: WCT-805BOur Commapany offers (No AT Commands) Serial/Modbus/RTU to GPRS Gateway communication link provide a cost economical approach to achieve â??alwaysONâ?? packetized data network. It is a plug and play device, allows you the migration of your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge of AT command or GPRS. You can view this device as the virtual serial wire over the air that links all your remote equipments to the central PC. It is a full transparent, protocol independent gateway, for AMR, SCADA, general remote monitoring, control and data exchange applications. Features: Automatic Meter Reading Power Monitoring and Control Fault Indicators Temperature Alerts, Indicators Pump Control, Flow Measurements Surveillance Home Automation Windmill, SCADA, Data Exchange Central Monitoring and Control Systems Base Station, ATM Monitoring and Control Other information: Easy to plug and play allows to migrating your traditional serial communication system to the advance GPRS link, without tedious application development and in depth knowledge on AT command or GPRS. You can view the device like virtual serial wire over the air that links all your remote equipments to the central PC/Server. It is a full transparent protocol in-dependent gateway. It is easy to configure, manage, and monitor remote devices on a private network over the Internet. The products also come with built-in I/O that can be configured to indicate the priority of events. The device can configured or update firmware over the air (OTA).
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
Industrial IoT Gateway BL110 is a rugged industrial IoT gateway, especially suitable for industrial IoT, for realizing IT and OT integration, OT and cloud platform communication. Industrial IoT Gateway BL110 used to convert Modbus, Modbus , DLT645, PLC, BACnet MS/TP, BACnet/IP and other industrial protocols to MQTT, OPC UA, BACnet/IP, Modbus TCP and other protocols. Industrial IoT Gateway BL110 provides 1 WAN, 1 LAN, 1 RS232, 3 RS485, 1 CAN interfaces, and also supports 4G wireless communication and GPS positioning functions. Industrial IoT Gateway BL110 has built-in multiple mainstream cloud engines, including AWS IoT, Thingsboard, SparkplugB, Aliyun, Huawei IoT, KPIIOT, etc., which can quickly access multiple cloud platforms at the same time. Industrial IoT Gateway BL110 also provides OPENVPN to ensure network security, supports TLS, SSL, X509 root certificate for data encryption functions, in addition, it also has the function of data reissue to ensure data integrity. In a word, the Industrial IoT Gateway BL110 can meet your needs for various industrial IoT applications.
The PLC Gateway D225 is a converter for converting the data protocol of Mitsubishi PLC into Modbus TCP RTU protocol. The D225 can store the I/O data of the PLC to the gateway through the RS-232 or RS-485 serial port of Mitsubishi PLC. The gateway transmits the data to the cloud platform through the Modbus protocol, and also allows your software to pass through the local area network anywhere. Or Internet access to serial port devices. 1.Built-in industrial grade ARM CortexTM core, high performance, low power consumption, stable and reliable. 2.Converting the data protocol of Mitsubishi PLC into Modbus TCP protocol,then connect to cloud. Support 1 channel RS-232, 1 channel RS-485 and 1 channel TTL. 3.Support 1 channel RJ45 Ethernet port 4.Support RESET button to restore factory function (long press for 3 seconds to recover) to prevent parameter setting error. 5.Using metal shell material, protection grade IP30, metal shell and system safety isolation, especially suitable for industrial control applications. 6.Using configuration software to set device parameters, support WIN XP, WIN 7, WIN 8 and WIN 10, friendly interface. 7.Support static IP address or DHCP to obtain IP address automatically, and query the devices in the network through UDP broadcast protocol. 8.Support local HMI touch screen and remote simultaneous access to PLC for data acquisition and monitoring. 9.Support server domain name resolution. Support firmware upgrade through TTL, firmware update is more convenient.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.