Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2, -EN590 10 PPM, -Diesel D6, -Diesel 50 PPM. -BIODIESEL -Mazut M100 -Bitumen -Crude Oil -Copper
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
1. Aviation Jet Fuel A1 2. Aviation Jet Fuel JP 54 3. EN590 10 ppm FOB Rotterdam, Fujairah, Houston Minimum 1,000,000 bbl Maximum 5,000,000 bbl No upper limit PROCEDURE ------------------ TRANSACTION PROCEDURES FOR FOB DELIVERY 1. Buyer accepts seller working procedure and issues ICPO with company registration certificate alongside copy of passport page 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice. 3. Seller issue TSR with GPS coordinate to Buyer Company, 4. Buyer contacts the Seller's storage facility for tank extension to enable Buyer approval to gain access to the facility and execute the Quality & Quantity Inspection in Seller Tank Farm for FRESH Analytical Report/Result by SGS. 5. After successful DIP test, (NCNDA/IMFPA) will be signed by all parties. 6. Seller injects product into Buyers vessel or injects into Buyers tanks Buyer or buyer take over the storage tanks, within maximum 48 hours Buyer pays via MT 103/TT for the spot transaction and seller issues all export documents to buyer. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction. Payment Terms : LC / SBLC / MT 103/TT ---------------------------------------------------------------------- Commodity: Bonny Light Crude Oil (BLCO) Grade: NNPC STANDARD Origin: NIGERIA BLCO Quantity: Initial 1 million or 2 million barrels. Contract: 1year + 2 further years rolling Term: SPOT LIFT / OFF OPEC Price: Dated Brent 3days Before & 3days after the bill of lading $12 Less $5 GROSS $9:00 to buyer, $4:00 to buyer/seller mandate/agents, $1:00 to consultant/handler.
Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
Jet A1 Aviation fuel
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
JP54 Jet Fuel is for use in gas-turbine-powered jet engines. The most common fuels are Jet A and Jet A-1, which are produced to an internationally standardized set of specifications. Jet B is a variant used in the civilian aviation sector for its enhanced cold-weather performance.
We are the serious supplier. I have 10 Millions MTs available in Rotterdarm/Hoston port every month now. If you are interested in it, we can discuss more details. Quantity MIN 2 Million MT per months * Origin: Kazakhstan, Russia Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: The price we can discuss. Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months or more with possible rollovers. * Inspection: SGS or similar
Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston, please
Description: Aviation Turbine Fuel (Jet A1) is the premier choice for powering commercial and military aircraft around the globe. Engineered to exacting standards and rigorously tested for quality and performance, Jet A1 is a highly refined kerosene-based fuel that meets the stringent requirements of the aviation industry. Key Features: High Purity: Jet A1 is produced through a meticulous refining process to ensure exceptional purity and cleanliness, minimizing the risk of engine deposits and fuel system corrosion. Low Freezing Point: Formulated with additives to lower the freezing point, Jet A1 remains fluid even at high altitudes and low temperatures, ensuring reliable engine operation in diverse weather conditions. Consistent Combustion: Engineered for consistent combustion characteristics, Jet A1 delivers stable engine performance and efficient fuel consumption throughout the flight envelope. Low Sulfur Content: Compliant with international aviation standards, Jet A1 contains minimal sulfur content, reducing emissions and environmental impact during flight operations. High Energy Density: With its high energy density, Jet A1 provides superior power output and range capability, allowing aircraft to travel longer distances with optimal fuel efficiency. Benefits: Safety and Reliability: Jet A1 is manufactured to the highest safety standards, ensuring reliable engine operation and minimizing the risk of fuel-related incidents or failures. Global Compatibility: Widely accepted and used by airlines, military forces, and aviation authorities worldwide, Jet A1 offers seamless compatibility with a broad range of aircraft and engine types. Environmental Responsibility: By meeting stringent emissions regulations and utilizing advanced refining techniques, Jet A1 helps mitigate the environmental impact of aviation activities, supporting sustainable air travel. Performance Optimization: Designed to meet the demanding requirements of modern aviation, Jet A1 delivers superior performance, efficiency, and endurance, enabling airlines to maximize operational efficiency and passenger comfort. Target Audience: Commercial Airlines: Essential for scheduled and charter airlines operating passenger and cargo flights, Jet A1 provides the fueling solution of choice for safe, efficient, and reliable air travel. Military Forces: Trusted by military organizations worldwide, Jet A1 fuels a wide range of military aircraft, from tactical fighters to strategic bombers, ensuring mission readiness and operational capability. General Aviation: Suitable for use in private and corporate aircraft, Jet A1 offers high-performance fueling options for recreational flying, business travel, and aerial work operations. Experience Unrivaled Performance and Reliability with Aviation Turbine Fuel (Jet A1)!
JET A1 Quantity: Minimum 1,000,000 Barrels / Maximum 5,000,000 Barrels Monthly FOB : Rotterdam , Houston, Kazakhstan , Fujairah Origin : Netherlands Commission: $2
Product: JET FUEL A1 Origin: Russia/Kazakhstan price: to be discussed payment: SBLC/DLC Delivery: CIF/FOB Rotterdam. Destination: looking for buyer all over the world
Russia origin Jet Fuel A1 from Russia oil refinery is available, CIF to non sanctions countries. Contract will be signed direct with Refinery , no upfront payment, no deposit, can also be FOB, Dip & Pay terms, mandate authorisation letter available
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Hallo Good day we supplying Jet Fuel A 1 and EN 590 10 PPM and 50 PPM - Origin Kazhakstan and other Non sanctioned Countries Very genuine refinery - we have on going contracts - Long chain brokers please dont contact unless have direct contact with END buyer or Buyer Mandate - Need ICPO from direct buyer to refinery we assure best price and mark up ( conditional ) we can provide TTV, TTT, TTO , CIF , FOB
Hallo Good Day we can offer Jet fuel EN 590 10 ppm and trusty refinery which we already dealing Kazak and Qatar Origin available Buyers who interested , kindly contact iur wats up - 0091 9895009900 or e-mail - mujib@algagroup.in Only genuine buyers please - prefer mandates/ intermediates who knows the buyer well with previous succesful transactions Aaiting your reply MUJIB ALGA GROUP
Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
Jet A1 Fuel FOB PRICE Aviation Turbine Fuel (JPA1) Trial Quantity: 2,000,000 BBLS Contract Quantity: 10,000,000 BBLS Delivery: Tank to Tank Origin: Kazakhstan Loading Port: Rotterdam Inspection: SGS Payment: MT 103 Swift Bank to Bank on Invoice FOB TTT PROCEDURE 1. The Buyer Issue an ICPO. Containing the seller's work procedures and Banking Details along with TSA (TANK STORAGE AGREEMENT), Buyer Certificate of incorporation, Company Profile (CP) and International Passport Copy of the CEO. 2. Seller issues ICC Warning Letter and Commercial Invoice (CI) of products in tank at port, buyer signs and returns the documents with acceptance and commitment letter stating to adhere to seller procedure. 3. The seller issues a copy of the SGS Report strictly JUST to the buyer's Tank farm Company only to verify the SGS Report. 4. after confirmation of successful verification of SGS Report only by Buyer's Tank Farm Company. The Buyer pays his Tank Company for 5 Days TSR and sends his TSR to the Seller. All Parties must sign NCNDA and IMFPA for endorsements. 5. The seller issues the following POP documents to the buyer; (a) SGS report for quality and quantity not older than 48 hours (b) Product Certificate of Origin (c) Product injection report (d) Tank storage receipt with full GPS coordinates (e) Unconditional dip test authorization letter (f) Authorization to sell and collect (i)Q&A 6. After verification of the documents, the injection will be commenced and after injection the buyer makes payment for the total value of the product injected into the tank via MT103-TT. 7. After receiving confirmation of Buyer Payment, the seller immediately transfer the title ownership to the buyer. 8. Seller sends payment of all intermediaries involved in the transaction 24 hours after receiving confirmation of Buyer Payment as per signed & sealed NCNDA/IMFPA which is notarized by Public Notary in Kazakhstan and then monthly remittance is continued as per terms and terms of the contract of sale and purchase agreement t between the buyer and seller.
