Find Verified Rubber Latex Suppliers, Manufacturers and Wholesalers

NBR (Nitrile Butadiene Rubber Latex) - Acrylonitrile Butadiene Copolymer
Specifications:
Appearance: Milk White
Solid Contend (Butadiene Acrylonitrile Copolymer): >=43.5%
Viscidity (100 mpa.s max ): <=100
PH Value: 8<=PH<=9
200 mesh coagulation/ppm:<=100

Nitrile butadiene rubber, also known as nitrile rubber , NBR, Buna-N, and acrylonitrile butadiene rubber, is a synthetic rubber
derived from acrylonitrile (ACN) and butadiene.

Product Paramenters
Item Units Appearance
Type QD-701
Appearance Milk white
Solid content % 43.5-46%
PH value Min 8.0
Viscidity mPa.s Max 40
Coagulum % Max 0.1
Mechanical stability % Max 0.1

Packaging
23tons /flexitank
IBC drum*20, 20tons/FCL

Shipping:
Promote shipping usually 7--14 days after receiving TT deposit

Best one Rubber latex from our best plants farms from West Africa, Ivory Coast. Low humidity.

Type : Centrifuged Latex DRC 60%HA
Product Code : HS : 4001
Total Solid Content: 61% min
Dry Rubber Content : 60% Min
Non Rubber Solids: 1.7% max
Alkalinity: 0.6% min
MST: 650 min
VFA: 0.06 max
KOH: 0.7 max

Hospital, Clinic, Homecare, Lab, Housing, IT Industries, Beauty Industries
Persons suffering from latex allergy
When glove is not subjected to hard mechanical stress
Waterproof (lightly, both hot and cold)
Short term general use
Economic and widely used

LATEX CONCENTRATE (HA)
TYPE
Natural rubber latex concentrate (HA) is a high ammonia centrifuged concentrated latex of the sap of Hevea brasiliensis trees. This general purpose type latex finds its application in a variety of products.
APPLICATION
HA latex is the most widely used form of concentrate and has the advantage that the only preservative (ammonia) it contains is volatile. Hence it may be used confidently in food applications and for medical goods.
HA latex concentrate has wide applications especially in the dipped products like medical or industrial gloves, balloons, condoms, catheters, finger cots, tubing, etc.
It is also used as an adhesive for footballs, bandages, in wood lamination and for binding different types of materials.
It gives excellent films of high clarity and has good adhesion characteristic.
STORAGE
Store the product under shelter at temperatures between 10�°C and
35�°C
Creaming of latex may occure during storage. It is therefore necessary to stir well the latex before used.
As the product is based on natural rubber latex changes in colloidal properties may occur on storage.
TYPICAL PROPERTIES
Total Solids Content (TSC), %
61.00 min

Dry Rubber Content (DRC), %
60.00 min

Non Rubber Content (NRC ), %

1.70 max
Ammonia Content (on total weight), %
0.65-0.75
pH Value
11.00 max
KOH Number
0.70 max
Volatile Fatty Acid Number

0.05 max
M.S.T. @55% TSC, sec.

650 min
Magnesium Content, (on solids),


ppm
40 max
HANDLING PRECAUTION
Before handling, read product information, chemical safety data sheets and container label for safe use, physical and health hazard information.
PACKING
Available in both bulk and drum.

We serve the export of rubber latex lumb in large quantities according to your needs, and we are also looking for investors for rubber plantation that we manage (with profit sharing system, the core pattern and plasma, the ratio 50%: 10%: 40%, 50% for investors, 10% of us / managers, 40% owner of the land / people / our members).

Perton, minimum order per container.

Natural rubber latex



5 to 6 kg per (1x15x36)inc sheet

Field latex is a white or slightly yellowish opaque liquid with a specific gravity, which varies between 0.974 and 0.986. It is a weak lyophilic colloidal system of spherical or pear shaped rubber globules suspended in an acquiesces serum. Field latex is centrifuged to manufacture latex concentrated of 60% rubber content. Centrifuged latex is commercially available in two different varieties, one with high ammonia (above 0.60%) and the other with Low Ammonia (less than 0.30%). It also contains secondary preservatives like TMTD (0.0125%) and zinc oxide (0.0125%). Grading, packing, and making of centrifuged latex are as per specifications prescribed in IS 5430.

Rubber Cup Lumps 60% - 65% DRC, using Dry Oven method. Available for regular supply, with 2000 MT ready for dispatch at special rates. Terms of Payment Advance/L/C. Product Certification provided by - SGS CI AFL Laboratory. Option for Inspection of Material at site is available.

Specifications :

---Latex---
Level: CV50/60
Color:Green
Dirt content(% wt, max):0.05
Initial plasticity, Po(min):-
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):-
Mooney viscosity ML (1+4)100 C:60 ±5

Specifications :

---Latex---
Level: 5
Color:Green Dirt content(% wt, max):0.05
Initial plasticity, Po(min):30
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):-
Mooney viscosity ML (1+4)100 C:-

Product Description :
Raw material made from resin of rubber tree

Price of product ( USD price or FOB price) :
SD 1823-1905 per MT

Product origin :
Cambodia

Key Specifications/Special Features :
Dirt content(% wt, max):0.05
Initial plasticity, Po(min):-
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):-
Mooney viscosity ML (1+4)100 C:60 ±5

Minimum Order Size and Packgaing details :
Packing:To be discussed with customers , Minimum Order Quantity20 feet container

Product Description :
Raw material made from resin of rubber tree

Price of product ( USD price or FOB price) :
USD 1680-1755 per MT

Product origin :
Cambodia

Key Specifications/Special Features :
Dirt content(% wt, max):0.05
Initial plasticity, Po(min):30
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):-
Mooney viscosity ML (1+4)100 C:-

Minimum Order Size and Packgaing details :
Packing:To be discussed with customers , Minimum Order Quantity20 feet container

Product Description :
Raw material made from resin of rubber tree

Price of product ( USD price or FOB price) :
USD 1713-1790 per MT

Product origin :
Cambodia

Key Specifications/Special Features :
Dirt content(% wt, max):0.05
Initial plasticity, Po(min):30
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):6
Mooney viscosity ML (1+4)100 C

Minimum Order Size and Packgaing details :
Packing:To be discussed with customers , Minimum Order Quantity20 feet container

Product Description :
Raw material made from resin of rubber tree

Price of product ( USD price or FOB price) :
USD 1603-1675 per MT

Product origin :
Cambodia

Key Specifications/Special Features :
Dirt content(% wt, max):0.1
Initial plasticity, Po(min):30
Plasticity retentionindex, PRI (%, min):50
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.75
Colour index(max):-
Mooney viscosity ML (1+4)100C

Minimum Order Size and Packgaing details :
Packing:To be discussed with customers , Minimum Order Quantity20 feet container

Specifications :

---Latex---
Level: L
Color:Green Dirt content(% wt, max):0.05
Initial plasticity, Po(min):30
Plasticity retentionindex, PRI (%, min):60
Nitrogen content(% wt, max):0.6
Volatile matter content(% wt, max):0.8
Ash content(% wt, max):0.6
Colour index(max):6
Mooney viscosity ML (1+4)100 C

Natural rubber latex HA 60% Drc
Packing in flexibag/ new steel drum

Material Properties
Styrene butadiene Rubber latex is a kind of high-polymer dispersion emulsion polymerized by butadiene, and styrene, etc. through advanced techniques. As a white thick emulsion in appearance, it has good viscosity. It is one of the popular raw materials in tyre-dipping fabric industry, because of its good intermiscibility with VP latex for fabric dipping.

Typical properties
Product Styrene butadiene Rubber latex (SBR latex)
Execution Standards: Q/320205 GLFF01-2010
Item Standard
Solid Content, % 50.0±1
Viscosity, mP25-35
pH Value(25ºC) 10-11
Density,g/cm3(20ºC) 0.98-0.99
Mechanical Stability, %5
Chemical Stability, %0.33

Application
It is suitable for the dipping of tyre cord fabric, and industrial fabric etc..


Storage&Package
1.Avoid from rain, snow or strong sunlight. Temperature: 1~40°C.
2.200L Drum, 1000L IBC.
3.Keep in dry, cool, non-aggressive gas warehouse, and avoid strong sunlight, remote from fire and thermal resource at 1~40°C, 6 months shelf life, a little decrease of PH value.

Latex Concentrate (HA)

Type:
Natural rubber latex concentrate (HA) is a high-ammonia, centrifuged concentrate derived from the sap of Hevea brasiliensis trees. This general-purpose latex is used in a variety of products.

Application:
HA latex is the most commonly used concentrate, valued for its single preservative, ammonia, which is volatile. This makes it suitable for food and medical applications.
Widely utilized in dipped products including medical and industrial gloves, balloons, condoms, catheters, finger cots, and tubing.
Also used as an adhesive in the production of footballs, bandages, wood lamination, and for binding various materials.
Provides excellent films with high clarity and superior adhesion characteristics.

Storage:
Store under shelter at temperatures between 10�°C and 35�°C.
Creaming may occur during storage; therefore, it is essential to stir the latex thoroughly before use.
As the product is based on natural rubber latex, changes in colloidal properties may occur over time.

Typical Properties:
Total Solids Content (TSC): 61.00% min
Dry Rubber Content (DRC): 60.00% min
Non-Rubber Content (NRC): 1.70% max
Ammonia Content (on total weight): 0.65% - 0.75%
pH Value: 11.00 max
KOH Number: 0.70 max
Volatile Fatty Acid Number: 0.05 max
M.S.T. @55% TSC: 650 sec min
Magnesium Content (on solids): 40 ppm max

Handling Precautions:
Before handling, review the product information, chemical safety data sheets, and container label for safe use, physical, and health hazard information.

Packing:
Available in both bulk and drum packaging.