Designed to create a secure parking space at petrol stations or other parking facilities;
The flexible sectional design gives the chance to form a bumper of any length;
Visibility is ensured by reflective elements in the dark;
Secure fastening to anchors, and connection of details thanks to reliable locks.
Features:
1) High temperature resistance-low temperature flexibility
2) Wear and tear endurance
3) Acid and alkali resistance
4) Customers' samples and drawings are available
Rubber bumpers are widely used in various applications. They are defined as devices used to absorb shock between two objects. The most common application of bumpers is in vehicles and vehicles yards. A bumper is made of Natural rubber and synthetic rubber blended with reinforcement materials. These bumpers are widely used because they are susceptible to damage from small contacts. They are considered to be elastomeric hardware devices that are used for edge protection, cushioning, and impact absorption.
Bumper dimensions are varied in length, width and height
Bumpers have a specific engineering design to absorb heavy load and it is released without damage also bumper should have elastic properties as well as the required hardness. Easy mounting with nut and bolt for application.
Bumpers are protected from weather, ozone, UV and oxygen conditions and we can design customer requirements.
Size :L-200x80x80mm
Materials : SBR & NR
Hardness : 60-65Shore
Advantages
They provide protection to surfaces and allow spacing and ventilation.
The vibration in equipment is controlled by using a bumper.
The rubber bumper also offers sliding resistance.
These bumpers absorb and deliver momentum during collisions, which reduces the effect of collision.
They protect the surfaces from scratches and skidding.
The main advantage of rubber and plastic bumpers is that they can be manufactured in the desired colors.
Applications
They are used to provide protection for safety-related equipment like taillights, headlamps, and parking lights in low-speed collisions.
Bumpers offer reduced sound qualities for cabinets and vanity doors.
To use installation heavy machine.
Heavy-duty rubber dock bumpers are used for both vehicle and loading dock applications.
Material -Natural Rubber/Synthetic rubber
Properties- Shock absorbing, Vibration Isolation, damping, UV Protection
Application-Heavy trucks, container trailers, machinery, dock yards, container yards, unloading ramps
Rubber bumper is thick article
We are manufacturer of rubber and silicone products in shenzhen city of china, which can produce rubber absorbers, rubber vibration absorbers, rubber bumper feet, rubber feet, rubber damper etc according to the detail drawing, design or sample.
Product name:rubber absorber, rubber bumper feet
Material:rubber(sbr, nbr, cr, epdm) and metal part(nut, screw etc)
Size:according to the drawing, design or sample that you have
Colour:any
Hardness:any
Moq:5000pcs
Packaging:inner plastic bag and outer carton packed
We are manufacturer of rubber and silicone products in shenzhen city of china, which can produce rubber absorbers, rubber vibration absorbers, rubber bumper feet, rubber feet, rubber damper etc according to the detail drawing, design or sample.
Product name:rubber absorber, rubber bumper feet
Material:rubber(sbr, nbr, cr, epdm) and metal part(nut, screw etc)
Size:according to the drawing, design or sample that you have
Colour:any
Hardness:any
Moq:5000pcs
Packaging:inner plastic bag and outer carton packed
47289 Rubber Bumper Suppliers
Short on time? Let Rubber Bumper sellers contact you.
Application Marine
Material Natural
Shape DO Type &DD Type
Color Black
We are manufacturer of Dock Bumpers in Natural rubber as per customer required size. There are two type of Dock Bumpers available with us one is DO Type & other is DD Type as per customer requirement.
Our standard size as follows
DO Type : 75 mm width x 75 mm width with 25 mm Round Hole
100 mm width x 100 mm width with 50 mm Round Hole
150 mm width x 150 mm width with 75 mm Round Hole
DD Type : 75 mm width x 75 mm width x D Shape Hole of 25 mm width x 25 mm Height.
100 mm width x 100 mm width x D Shape Hole of 50 mm width x 50 mm Height.
150 mm width x 150 mm width x D Shape Hole of 75 mm width x 75 mm Height.
Place of origin: haining, china (mainland)
Brand name: huajiao
Model number: black vibration bumper
Material:epdm, silicone, fkm, nbr, sbr, sponge rubber...
Size: as per customer's requirements
Color: black, white, red, green, transparent or any color
Tolerance: â±0.05mm
Technology: hot pressing molding , injection molding or extrusion
Hardness: shorea
Working temperature: -60~350â??
Density: 1.0-2.0g/cm3
Drawing format: dwg/dxf/igs/step/x-t and pdf
Description:
These Rubber Bumpers are made from a hardwearing blend of EPDM and
available in various sizes. The rubber buffers protect against harsh impacts, they
can be bolted directly to the desired surface using the pre-drilled counter sunk
holes.
Size:610*210*130mm
Color: Black - Black and Yellow
Material: EPDM
Operating temperature Range: -15C to 70C
1-Black Rubber Bumper
Dimensions:
50cm*50cm
Description:
- It helps align parked cars and control speed in driveways, parking lots, and roads. It
Prevents vehicles from pulling through parking spots and keep cars a safe distance from
each other in parking lots and keeps speeds low in high-traffic areas.
- The size of bolt that use to install it, is 25 mm.
- Maximum height: 5cm - 7cm.
- It has a place to pass power cables under it and place to put a night reflectors.
Applications:
It is used to make the speed slow in garage, tourist
village, places to wait, schools and club
Material: EPDM Rubber
Color: BLACK
Life Span : 5:10 years - according to how to use it
2- Black and Yellow Rubber
Dimensions: 40cm*100cm*5cm.
Weight: 18 kg
Description:
It helps align parked cars and control speed in driveways, parking lots, and roads. It
Prevents vehicles from pulling through parking spots and keep cars a safe distance from
each other in parking lots and keeps speeds low in high-traffic areas.
- The size of bolt that use to install it, is 25 mm.
- Maximum height: 5cm - 7cm.
- It has a place to pass power cables under it and place to put a night reflectors.
Application:
- It is used to make the speed slow in garage, tourist village, places to wait, schools and club
Material: Natural Rubber & SBR
Color: BLACK & Yellow
Life span: 5:10 years - according to how to use it
Introduction of oil tanker use pneumatic fender inflatable rubber bumper
Inflatable boat fender is the advanced anti-collision device for marine application in the world today. It uses compressed airbag as medium to absorb the impact energy when ship-to-ship contact(STS). It uses compressed air as medium to absorb the impact energy when ship-to-berthing(STB).
Application of inflatable boat fender
--Oil and gas tankers
--Fast ferries and aluminium vessels
--Temporary and permanent installations
-- Rapid response and emergencies
Structure of inflatable boat fender
1.Drawing of inflatable boat fender
Inflatable boat fenders made by an outer rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, then shaping curing.
1.The outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
2.The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender.
3.The inner rubber layer seals the pressurized air inside the fender.
Rubber dock bumper is used in harbour port walls to avoid jetty's from damaging the wall of boats. We also produce other rubber bumpers which are used to protect doors, walls, rails, docks, truck bumpers, utility trailers, carts, fork lifts, curbs, rollers, sliders, packers, pushers, conveyors, braces, corners and other places where metal to surface contact is harsh and continuous. Made with high tensile, abrasion-resistant rubber compounds in molded and extruded shapes and styles. Most commonly used where metal meets metal or concrete. Used extensively on commercial and animal trailers, delivery vehicles, tow trucks, etc.
Material: Rubber: NBR, or according to customer requirement. Metal: Zinc plated, stainless steel
Hardness: 75+/-5
Color: Black mostly; Customized colors are available
Quality: RoSH verified compound;
Packing: Plastic bags in carton or according to your requirements
We can make mould and manufacture the different rubber feet, rubber bumper feet, rubber bumper according to the drawing, design or samples.
Product name:adhesive rubber feet
Material:rubber.Tpr or silicone
Colour:any
Hardness:65-75 shore a
Size:according to the drawing, design or samples
Moq:10000pcs
According to your requestment, , such as drawing, design or samples
Quality: Stable, Good elasticity and Flexibility, self-life over 12 months
Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.
Rubberwood is a light-colored medium-density tropical hardwood obtained from the Par rubber tree (Hevea brasiliensis), usually from trees grown in rubber plantations. Rubberwood is commonly advertised as an "environmentally friendly" wood, as it makes use of plantation trees that have already served a useful function
Name: Rubber band
Size: Can be customized
Sample lead time: 3~5 working days
MOQ: 300kgs
Product Features:
1. High Toughness,Good elastic ,Can Be Extended To Seven Times Length Won't Break
2. Environmentally Friendly,Nontoxic ,Anti-aging,Not Stickly!
3. Vietnam Import Natural Rubber ,100% Rubber Content ,Quality Guarantee
Standard packing: 100grams/polybag, 200grams/polybag, 300grams/polybag, 30kg/bag,etcâ?¦.or depending on needs of customer.
Production lead time: 3 days by store in warehouse and 10-15 working days according to customerâ??s Color and SIZE .(depend on the order quantity)
47289 Rubber Bumper Suppliers
Short on time? Let Rubber Bumper sellers contact you.
