Rubber antioxidant tmq/rd Rubber antioxidant rd (polymerized-2, 2, 4-trimethyl-1, 2-dihydroquinoline resin) 1f=molecular formula(c12h15n)n. N=2f+4. 2f=specilication:(gb8826-88) Item high grade ist grade Appearance amber to brown flake Soften point 80f+100 80f+100 Reduction in weight after heating, %f_ 0.30 0.50 Ash, %f_ 0.30 0.50 3properties:amber to brown flake or powder. Gravity 1.05, solube in benzol, chloroform and acetone, nonsoluble in water, but little soluble in petrolem hydrocarbon. 4 application:the product is mainly used for natural rubber, butadiene nitrile and chloroprene rubber etal, used in tyres, industry rubber and so on. pacdage: polypropyrene knitted bags lined with polyethylene bags. Net weight 25kg per bag
Properties: This product is brown piece of amber, Density:1.05g/ cm3. Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof. Application: RD is a very important category rubber antioxidant. It has a good protective effect for heat, oxygen and fatigue aging, and stronger inhibitory effect for metal catalytic oxidation, no spray cream phenomenon, widely used in the manufacture of tyres, motorcycles births, bicycles births, rubber, plastic, adhesive tape, wires, cables and other rubber products. Package: In knitted bag lined with plastic bag or kraft paper bag.25kgs/bag or at buyer,s request.
Rubber Antioxidant TMQ / Rubber Antioxidant RD Chemical Name: Polymerized 2, 2, 4-trimethyl-1, 2-dihydroquinoline Another Name: RD CAS NO.: 26780-96-1 Technical Specifications: Appearance: Brown granules Softening point, deg.: 80-100 Heating Loss % max.: 0.30 Ash Content % max.: 0.30 Packaging and storage: 1. In woven bag or paper bag lined with PE film bag, net weight: 25Kg/bag. 2. Stored in dry, clean and cool warehouse, Shelf life is one year.
Application: This product is a general amine antioxidant with excellent heat, oxygen and aging properties in rubber industry. It is especially suitable for all-steel and semi-steel radial tires, and is widely used in tires, hoses, belts, rubber shoes, rubber products and other general industrial rubber products, as well as latex products.
Properties: Amber to brown flake or granular. Gravity 1.05, soluble in benzol, chloroform and acetone, nonsoluble in water, but little soluble in petroleum hydrocarbon. Application: The product is mainly used for natural rubber, butadiene nitrile and chloroprene rubber etal, Used in tyres, industry rubber and so on. Storage: Keep container tightly closed in a cool, well-ventilated place. Packaging: 25kg bag. Polypropyrene knitted bags lined with polyethylene bags.
Rubber Accelerators (MBT, MBTS, CBS, DPG), Rubber Antioxidants (TMQ, IPPD, 6PPD), and Anti scorching Agent (PVI)
Mainly supply rubber antioxidant TMQ/6PPD/IPPD/D/A/DTPD/NDBC/BLE/MB/MBZ/MMB/ZMTI/2246/BHT/SP, insoluble sulfur, petroleum resin. 25kgs/bag
1specilication:(hg2-1483-83) Item specification 1st grade 2nd grade Viscosity·+30f¦·¼ 2.5-5.0 5.0-7.0 Density, ·+p·¼g/cm3·+20f¦·¼ 1.08-1.10 1.08-1.12 Volatility, %f_ 0.4 0.4 Ash, %f_ 0.3 0.3 2properties:dark brown viscose liquid. Soluble in acetone, benzol, chloroform, and alcohol, little soluble in gasoilne, nonsoluble in water. 3application:the product is mainly used for chloroprene rubber, natural rubber, butadiene nitrile rubber and butadiene styrene rubber etal. Used in meridian tyres and so on. 4package:package with metal pail. Net weight 200kg per pail. 4package:package with metal pail. Net weight 200kg per pail.
Rubber antioxidant d Rubber antioxidant d (n-phenyl-2-naphthylamine) 1f=molecular formula:c16h13n 2f=specification:(hg2-469-79) Item specification Appearance pale or brown powder Melting point, 0f¦fª 105.0 Reduction in weight after heating, %f_ 0.20 Ash, %f_ 0.20 Phenylamine content no blue and purple reaction by testing Screen residue(100 meshes), %f_ 0.2 Magnetic object content, %f_ 0.008 3f=properties:pale powder, boiling point 365.5f¦. Soluble in acetone, chloroform, alcohol and tetracol, nonsoluble in gasoline and water. 4f=application:the product is mainly used for natural and synthetic. Used in tyres, rubber belts, rubber shoes and so on. Package:polypropyrene knitted bags lined with polyethylene bags. Net weight 25kg per bag.
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Rubber accelerator cbs Chemical name:n-cyclohexyl-2-benzothiazole sulfenamide Molecular formula:c13h16n2s2 Cas no:95-33-0 Specification: Appearance Gray-white powder Gray -white granular Initial m.P. Oc 98.0 98.0 Heating loss % 0.30 0.30 Ash% 0.30 0.30 Residues on sieve(150î¼m), % 0.10 Properties:gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oc above. Soluble in benzene, boluene, chloroform, cs2, ch2cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:cbs has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in epdm. 25kg/bag
Rubber accelerator tmtd Specification: Chemical name:tetramethyl thiuram disulfide Cas no: 137-26-8 Specification: no.Itemunitspecification 1appearance-white powder 2initial m.P. (min)c142.0 3loss on drying (max)%0.40 4ash (max)%0.30 5residue on 150m sieve (max)%0.10 Properties:no odor and poison. Irritating to the skin and the respiratory tract. Specific gravity: 1.38--1.44. Soluble in chloroform, acetone, benzene; hardly soluble in carbon tetrachloride, ethyl alcohol & insoluble in water or gasoline. Application:can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and ev cure systems. Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for epdm. May be used as a retarder in the vulcanisation of polychloroprene rubber with etu. Storage:keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Rubber chemical, rubber accelerator MBT,MBTS,CBS,TMTD,DPG,MBS,TBBS,DCBS,ZDEC, rubber antioxidant TMQ,IPPD,6PPD,PBN.
Quality: Stable, Good elasticity and Flexibility, self-life over 12 months Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.
It's made from natural rubber material with many sizes, colors and shapes. It's the best choice for decorating birthday/wedding party
Origin: Vietnam Material: Rubber band Color: Yellow, Red, Green Diameter: 2cm, 3cm, 5cm Thickness: 2mm, 3mm MOQ: 1MT Packing: 25kgs/carton
Name: Rubber band Size: Can be customized Sample lead time: 3~5 working days MOQ: 300kgs Product Features: 1. High Toughness,Good elastic ,Can Be Extended To Seven Times Length Won't Break 2. Environmentally Friendly,Nontoxic ,Anti-aging,Not Stickly! 3. Vietnam Import Natural Rubber ,100% Rubber Content ,Quality Guarantee Standard packing: 100grams/polybag, 200grams/polybag, 300grams/polybag, 30kg/bag,etcâ?¦.or depending on needs of customer. Production lead time: 3 days by store in warehouse and 10-15 working days according to customerâ??s Color and SIZE .(depend on the order quantity)
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Quality: Stable, Good elasticity and Flexibility, self-life over 12 months Application: Agricultural, Industrial, Electronic, Household, Tie Money, Flower, Hair, Package and Food, etc. Can be used widely as gifts, decorations, mechanical equipment, making gloves, etc.
