Overview Ajlon RTU is a Quad band GPRS 2G/3G/4G communication enabled device which RS232 or Serial or RS485 over Modbus RTU protocol and transfers vital operational data (measurement as well as alarm data) to the remote server in a timely manner Product Features Communicates with any RS485 device over Modbus RTU and collects all related data periodically All data and event messages are time stamped USB Interface to program all configurable parameters Configurable Remote Server IP Address, Server Port number Configurable GPRS Service provider APN, Username and Password Modbus communication parameters baud rate, parity, number of stop bits etc Modbus Poll interval, server data transfer interval RTC time Any device site name Watchdog timer enabled system integrity Built-in retry and buffering mechanism to transfer data to the server to mitigate low signal strength and temporary GPRS service outage problem Technical Specifications Supply Voltage 24V DC Input type Modbus RTU or Serial or RS232 Modbus RTU mode Supports Master mode â?? Can communicate with the slave device and get operational parameters and control the output state of device VFD poll rate Programmable â?? minimum 60 seconds configurable parameters 1 Remote server IP, Port number 2 Poll interval 3 RTC Time 4 Modbus Communication parameters- Baud rate, parity, number of stop bits etcâ?¦ 5 Device name LED Indication LED indication in the front panel for all type of fault states 1.GSM Module error 2.SIM Presence state 3.GSM Signal Strength 4.Unit Health Status 5.Modbus communication status 6.Server connectivity status Operational Parameters for Remote monitoring Parameters available with any selected device Alarms for Remote Monitoring Parameters supported by device GPRS connection mode Continuous Always connected to theserver Environmental Specifications Operating Temperature 0 C to 50 C Storage Temperature 0 C to 70 C Relative Humidity 85% Non condensing
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.
SPECIFICATIONS FOR DOUBLE A4 PAPERS 80GMS COPY PAPERS Double A Copy Paper Scrooge Copy paper Ik Plus Copy Paper Ik Yellow Copy Paper Navigator copy paper Laser / Copier Paper Reflex Copy Paper Xerox Copy Paper Chamex Multi Chamex Office Mondi Rotatrim Golden Star SPECIFICATION FOR A4 COPY PAPER : A4 COPY PAPER 80 GSM /75 GSM / 70 GSM Weight: 80 GSM Sheet Size: 210mm X 297mm, Whiteness : 95-105 International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = High Speed Copying 100ppm Laser Capable, Inkjet Capable, Fax Capable. Thickness :103-110 um Surface roughness TS ml/min:75-175 Surface roughness BS ml/min:100-200 Bending stiffness MD > 110 Mn Bending stiffness CD > 50 Mn CIE WHITENESS : 148-152 Cobb Test : 27-33 g/m2 27-33 KEY PERFORMANCE: - No jam in photocopy machine - No double feed - Stay flat after copying - Leave no dust in the copy-machine - Nice appearance-white and clean - Nice touch-smooth and bulky - No see through-print both sides - Been developed for:- Photocopy Machines, Fax High Speed Copying 100ppm, Laser printers, Inkjet printers, Fax Machines. ADVANTAGES OF OUR PAPER QUALITY : - Smooth paper surface makes sharp printing and copying. - Two-sided usage gives the paper sheet high opacity. - Bright Appearance gives high print contrast to the printing. - Sharp cutting edges prolongs performance of copying machine. - Anti-curl quality reduces paper jams in the copier. - Low dust content minimizes copier running cost. - 500 sheets guarantee in Each Pack. PACKING LIST: 5 Reams per box. 500 Sheet per Ream. 7800 Reams (1560 Cartons)-1*20FT Container with pallet . 8000 Reams (1600 Cartons) - 1*20FT Container without pallet. INSPECTION . Quality and Quantity Inspections shall be carried out by SGS at seller's expense; at the port of loading. MINIMUM ORDER: 20 Tons /1*20ft Container (7800/Reams with pallets or 8000 / Reams without pallet).
t shirts cotton t shirt digital print sublimation 120 gsm 220 gsm logo printing summer t shirts Key attributes Industry-specific attributes Feature : Anti-wrinkle, QUICK DRY, Waterproof, Anti-pilling, Breathable, Sustainable, Windproof, Anti-Shrink Material : 100% Cotton Style : Pullover 7 days sample order lead time : Support Other attributes Printing Methods : Digital printing Place of Origin : Uttar Pradesh, India Supply Type : OEM service Technics : Printed Gender : UNISEX Weaving method : knitted Brand Name : Chawla Exports Model Number : STREETWEAR_001 Fabric Type : knitted Design : Unlined Season : Winter Sleeve Style : Regular Collar : O-Neck Pattern Type : Print Logo : Customized Logo Printing Color : Customized Color Fabric : 100% Cotton/Customized Fabric Size Accept Customzied Size Product name Custom Printed Hoodies OEM Printing : Custom Sublimation Printing MOQ : 50pcs Colors : Customs Colors Quality : High Qualtiy OEM Accepted Packaging and delivery Packaging Details Your products are carefully packed to ensure no damage in transportation. Custom packaging with your company name or logo is also available as per your demand. Port Lucknow Supply Ability Supply Ability 1000 Piece/Pieces per Day
t shirts cotton t shirt digital print sublimation 120 gsm 220 gsm logo printing summer t shirts Key attributes Industry-specific attributes Feature Anti-wrinkle, QUICK DRY, Waterproof, Anti-pilling, Breathable, Sustainable, Windproof, Anti-Shrink Material : 100% Cotton Style : Pullover 7 days sample order lead time : Support Other attributes Place of Origin : Uttar Pradesh, India Supply Type : OEM service Technics : Printed Gender : UNISEX Weaving method : knitted Brand Name : Chawla Exports Model Number : STREETWEAR_001 Fabric Type : knitted Design : Unlined Season : Winter Sleeve Style : Regular Collar : O-Neck Pattern Type : Print Fabric Weight : 200 Grams, 180 Grams Logo : Customized Logo Printing Color : Customized Color Fabric : 100% Cotton/Customized Fabric Size : Accept Customzied Size Product name : Custom Printed Hoodies OEM Printing : Custom Sublimation Printing MOQ : 50pcs Colors : Customs Colors Quality : High Qualtiy OEM : Accepted Packaging and delivery Packaging Details : Your products are carefully packed to ensure no damage in transportation. Custom packaging with your company name or logo is also available as per your demand. Port Lucknow Supply Ability Supply Ability : 1000 Piece/Pieces per Day
t shirts cotton t shirt digital print sublimation 120 gsm 220 gsm logo printing summer t shirts Key attributes Industry-specific attributes Feature : Anti-wrinkle, QUICK DRY, Waterproof, Anti-pilling, Breathable, Sustainable, Windproof, Anti-Shrink Material : 100% Cotton Style : Pullover 7 days sample order lead time : Support Other attributes Printing Method : Digital printing Place of Origin : Uttar Pradesh, India Supply Type : OEM service Technics : Printed Gender : UNISEX Weaving method : knitted Brand Name : Chawla Exports Model Number : STREETWEAR_001 Fabric Type : knitted Design : Unlined Season : Winter Sleeve Styl : Regular Collar : O-Neck Pattern Type : Print Logo : Customized Logo Printing Color : Customized Color Fabric : 100% Cotton/Customized Fabric Size : Accept Customzied Size Product name : Custom Printed Hoodies OEM Printing : Custom Sublimation Printing MOQ : 50pcs Colors : Customs Colors Quality : High Qualtiy OEM : Accepeted Packaging and delivery Packaging Details : Your products are carefully packed to ensure no damage in transportation. Custom packaging with your company name or logo is also available as per you demand. Port Lucknow Supply Ability Supply Ability: 1000 Piece/Pieces per Day
T-shirts t shirts cotton t shirt digital print sublimation 120 gsm 220 gsm logo printing summer t-shirts Key attributes Industry-specific attributes Feature : Anti-wrinkle, QUICK DRY, Waterproof, Anti-pilling, Breathable, Sustainable, Windproof, Anti-Shrink Material : 100% Cotton Style : Pullover 7 days sample order lead time : Support Other attributes Printing Methods : Digital printing Place of Origin : Uttar Pradesh, India Supply Type : OEM service Technics : Printed Gender : UNISEX Weaving method : knitted Brand Name : Chawla Exports Model Number : STREETWEAR_001 Fabric Type : knitted Design : Unlined Season : Winter Sleeve Style : Regular Collar : O-Neck Pattern Type : Print Logo : Customized Logo Printing Color : Customized Color Fabric : 100% Cotton/Customized Fabric Size : Accept Customzied Size Product name : Custom Printed Hoodies OEM Printing : Custom Sublimation Printing MOQ : 50pcs Colors : Customs Colors Quality : High Qualtiy OEM : Accepted Packaging and delivery Packaging Details : Your products are carefully packed to ensure no damage in transportation. Custom packaging with your company name or logo is also available as per your demand. Port Lucknow Supply Ability Supply Ability : 1000 Piece/Pieces per Day
t-shirts cotton t shirt digital print sublimation 120 gsm 220 gsm logo printing summer t shirts Key attributes Industry-specific attributes Feature : Anti-wrinkle, QUICK DRY, Waterproof, Anti-pilling, Breathable, Sustainable, Windproof, Anti-Shrink Material : 100% Cotton Style : Pullover 7 days sample order lead time : Support Other attributes Place of Origin : Uttar Pradesh, India Supply Type : OEM service Technics : Printed Gender : UNISEX Weaving method : knitted Brand Name : Chawla Exports Model Number : STREETWEAR_001 Fabric Type : knitted Design : Unlined Season : Winter Sleeve Style : Regular Collar : O-Neck Pattern Type : Print Fabric Weight : 200 Grams, 220 Grams, 180 Grams Logo : Customized Logo Printing Color : Customized Color Fabric : 100% Cotton/Customized Fabric Size : Accept Customzied Size Product name : Custom Printed Hoodies OEM Printing : Custom Sublimation Printing MOQ : 50pcs Colors : Customs Colors Quality : High Qualtiy OEM : Accepted Packaging and delivery Packaging Details : Your products are carefully packed to ensure no damage in transportation. Custom packaging with your company name or logo is also available as per your demand. Port Lucknow Supply Ability Supply Ability : 1000 Piece/Pieces per Day
Basic Info. Model NO. LFP51.2-200 Electrolyte LiFePO4 Color as Picture Usage RV/ Marine/ Telecom 5g Station/ Electric Mobility Warranty 3 Year OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 800*500*185mm Transport Package Carton Specification / Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description High Quality 51.2V 200ah Wall Mounted Lithium Battery The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 51.2V Wall mounted series Project Parameters Model 51.2V50Ah 51.2V100Ah 51.2V150Ah 51.2V200Ah 51.2V300Ah Nominal voltage 51.2V Nominal capacity 50Ah (2560wh) 100Ah (5120wh) 150Ah (7680wh) 200Ah (10240wh) 300Ah (15360wh) Dimensions (mm) 500*360*120 570*360*140/ 600*420*210 860*540*160 860*620*200 Weight About 30KG About 53KG About 80KG About 90KG About 120KG Working voltage 45---58.4V Floating charge voltage 54.4---55.2V Equalizing charge voltage 56---58.4V Charging current limiting 10A(The default charging current is greater than 55A, and the current limiting is on) It can be set through the upper computer Standard charging current current 10A 20A 30A 40A 40A Maximum continuous charging current 25A 40A 50A 50A 50A Standard discharge current 17A 33A 50A 66A 80A Maximum continuous discharge current 50A 100A 100A 100A 100A Charging ambient temperature 0~50 �ºC Discharge ambient temperature -20~60�ºC Storage ambient temperature 0~60�ºC Working environment Humidity :â?¤95; Altitude :â?¤4000 Communication mode It has the following communication ports CAN, RS485-1, RS232, RS485-2; CAN and RS485-1 are responsible for communicating with the inverter; RS232 is responsible for the communication with BMS upper computer, and is used as the battery software upgrade interface at the same time; RS485-2 is responsible for parallel communication between batteries. Power display mode LED light / display
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 1 ambient sensor input for monitoring onsite temperature and humidity; 8. Resend the data while communication failure and alert to users by SMS; 9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 15. Inbuilt 8G SD card to save up to 100000 historical data and events; 16. Inbuilt large capacity automatically rechargeable backup battery; 17. Industrial class design suitable for long time work applications; 18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
TMT-A4 / Double A -80 GSM Paper Technical Specifications-1 :- 1. Grading : A 2. - Multi-purpose 3. - High smoothness surface 4. - Perfect for high-quality printing and copying 5. - Super high whiteness produces outstanding clarity and contrast for all graphics/text 6. - Precision-cut edges for trouble-free performance 7. - Engineered for laser printers and high-volume copiers 8. - Bright white paper 9. - High image contrast, clarity and sharpness. 10. Packing std. weight 80gsm/500 sheets/ream- 5nos/box, 8000 reams per 20 feet container. Terms & Condition :- 1. The price quote is in USD only in FOB & CIF price we will tell you as per your sea port location at the time of order. 2. Payment Terms 50 % by TT with P.O to our account below & balance 50 % before dispatch at the time of dispatch . 3. Delivery by sea Asia ( 14 days ) , Australia ( 14 days ) , Europe ( 21 Days ) , North America â?? (24 days) , South America ( 24 days ) , Africa ( 21 days ) tentatively. tentatively. 4. TT Bank charges will be born by buyer only. 5. Advance can not be compensated to any other item or will not be returned once order is in execution. 6. MOQ is 8000 reams. Commercial Quote:- S.N ITEM Ream PRICE/ream Total (USD) 1. Premium Double A copy paper or TMT brand Premium paper-80 gsm, 210 x 297 mm Material Cost in USD ( FOB) 10240 Freight By sea CIF Destination ( Extra ) As actual Note : we will quote you sea freight separate in actual once order is finalised as per your country for CIF term.
A4 Copy Paper-80 GSM Premium Quality Technical Specifications-1 :- 1. Grading : A 2. - Multi-purpose 3. - High smoothness surface 4. - Perfect for high-quality printing and copying 5. - Super high whiteness produces outstanding clarity and contrast for all graphics/text 6. - Precision-cut edges for trouble-free performance 7. - Engineered for laser printers and high-volume copiers 8. - Bright white paper 9. - High image contrast, clarity and sharpness. 10. Packing std. weight 80gsm/500 sheets/ream- 5nos/box, 8000 reams per 20 feet container. Terms & Condition :- 1. The price quote is in USD only in FOB & CIF price we will tell you as per your sea port location at the time of order. 2. Payment Terms 50 % by TT with P.O to our account below & balance 50 % before dispatch at the time of dispatch . 3. Delivery by sea Asia ( 14 days ) , Australia ( 14 days ) , Europe ( 21 Days ) , North America (24 days) , South America ( 24 days ) , Africa ( 21 days ) tentatively. tentatively. 4. TT Bank charges will be born by buyer only. 5. Advance can not be compensated to any other item or will not be returned once order is in execution. 6. MOQ is 8000 reams. Commercial Quote:- S.N ITEM Ream PRICE/ream Total (USD) 1. Premium Double A copy paper or TMT brand Premium paper-80 gsm, 210 x 297 mm Material Cost in USD ( FOB) 10240 Freight By sea CIF Destination ( Extra ) As actual Note : we will quote you sea freight separate in actual once order is finalised as per your country for CIF term.
Double A A4 -80 GSM Premium Paper Technical Specifications-1 :- 1. Grading: A 2. - Multi-purpose 3. - High smoothness surface 4. - Perfect for high-quality printing and copying 5. - Super high whiteness produces outstanding clarity and contrast for all graphics/text 6. - Precision-cut edges for trouble-free performance 7. - Engineered for laser printers and high-volume copiers 8. - Bright white paper 9. - High image contrast, clarity and sharpness. 10. Packing std. weight 80gsm/500 sheets/ream- 5nos/box, 8000 reams per 20 feet container. Terms & Condition :- 1. The price quote is in USD only in FOB & CIF price we will tell you as per your sea port location at the time of order. 2. Payment Terms 50 % by TT with P.O to our account below & balance 50 % before dispatch at the time of dispatch . 3. Delivery by sea Asia ( 14 days ) , Australia ( 14 days ) , Europe ( 21 Days ) , North America (24 days) , South America ( 24 days ) , Africa ( 21 days ) tentatively. tentatively. 4. TT Bank charges will be born by buyer only. 5. Advance can not be compensated to any other item or will not be returned once order is in execution. 6. MOQ is 8000 reams. Commercial Quote:- S.N ITEM Ream PRICE/ream Total (USD) 1. Premium Double A copy paper or TMT brand Premium paper-80 gsm, 210 x 297 mm Material Cost in USD ( FOB) 10240 Freight By sea CIF Destination ( Extra ) As actual Note : we will quote you sea freight separate in actual once order is finalised as per your country for CIF term.
TMT-A4 / Double A Paper Technical Specifications-1 :- 1. Grading : A 2. - Multi-purpose 3. - High smoothness surface 4. - Perfect for high-quality printing and copying 5. - Super high whiteness produces outstanding clarity and contrast for all graphics/text 6. - Precision-cut edges for trouble-free performance 7. - Engineered for laser printers and high-volume copiers 8. - Bright white paper 9. - High image contrast, clarity and sharpness. 10. Packing std. weight 80gsm/500 sheets/ream- 5nos/box, 8000 reams per 20 feet container. Terms & Condition :- 1. The price quote is in USD only in FOB & CIF price we will tell you as per your sea port location at the time of order. 2. Payment Terms 50 % by TT with P.O to our account below & balance 50 % before dispatch at the time of dispatch . 3. Delivery by sea Asia ( 14 days ) , Australia ( 14 days ) , Europe ( 21 Days ) , North America â?? (24 days) , South America ( 24 days ) , Africa ( 21 days ) tentatively. tentatively. 4. TT Bank charges will be born by buyer only. 5. Advance can not be compensated to any other item or will not be returned once order is in execution. 6. MOQ is 8000 reams. Commercial Quote:- S.N ITEM Ream PRICE/ream Total (USD) 1. Premium Double A copy paper or TMT brand Premium paper-80 gsm, 210 x 297 mm Material Cost in USD ( FOB) 10240 Freight By sea CIF Destination ( Extra ) As actual Note : we will quote you sea freight separate in actual once order is finalised as per your country for CIF term.
Product Overview G1003 gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station. Features Be tallied with HART7.0 HART master and Modbus slave mode 4~20mA analog signal overlay HART digital signal Support 15 HART slave device Configure gateway by special software Write protect user data RS485 Modbus interface LED power and communication indicating Standard DIN rail installation
USR-TCP232-410S is a dual serial RS232 RS485 Ethernet converter, which is based on TI Cortex-M4 solution & integrated TCP/IP protocol stack. Basic Function of RS232 RS485 Ethernet Converter Industrial Solution: TI Cortex M4 Solution, -40~85C Web Server: Web socket/ Web to Serial Modbus Gateway: Modbus RTU to Modbus TCP / Modbus Pollinig Flow Control: CTS/RTS, XON/XOFF 2 Network links, each serial supports sending data to two target servers Network Printing N series supports hardware watchdog, never crash Basic Feature of RS232 RS485 Ethernet Converter Multiple indicator lights for convenient debugging Power-line terminal for industrial application ARM kernel and TCP/IP protocol stack Auto-MDI/MDIX,RJ45 port with 10/100Mbps TCP Server,TCP Client,UDP,UDP Server and HTTPD Client work mode Two ports can work independently at the same time Support virtual serial port and provide corresponding software USR-VCOM Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space DNS and DHCP supported Provide PC TCP/IP SOCKET programming example,VB,C++,Delphi,Android,IOS Built-in webpage;also can customize webpage for users Reload button,one key to restore default settings RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation The global unique MAC address bought from IEEE,user can define MAC address Upgrade firmware via network Keepalive,rapidly detect dead links Support account and password,can be used to page login and network settings Support one channel Websocket,realize bidirectional transparent transmisison bewteen webpage and serial 0 Support UDP broadcast function,send and receive data from all ip in the network Ethernet Serial Converters Application Field Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
L-signal measurement, and industrial-site signal isolation and long-term transmission and so on. Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming. Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside. Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80. Model selection Isoad16 u(a) - Vin/iin U1: 0-5v a1: 0-1ma U2: 0-10v a2: 0-10ma U3: 0-75mv a3: 0-20ma U4: 0-2.5v a4: 4-20ma U5: 0-¡¨¤ 5v a5: 0-¡¨¤ 1ma U6: 0-¡¨¤ 10v a6: 0-¡¨¤ 10ma U7: 0-¡¨¤ 100mv a7: 0-¡¨¤ 20ma U8: customized a8: customized Communication interface 485: output is rs-485 interface 232: output is rs-232 interface Dimensions:58*87.5*59mm
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
