Huadong blower co., ltd is specialized in manufacturing roots blower also vacuum pumps . Capacity: 0.4-824.6 m3/min Pressure: 0-98kpa Application: cement , aquaculture, waste water treatment, pneumatic conveying, paper printing plant, food processing, furnaces etc. If you are interested in our blower , please advise us your requirement, so that we can select the suitable blower model and submit quotation accordingly. 1) pls advise the capacity(m3/min) 850*500*570
Kaiv310 - 900 cfm [free air cfm rating Kaiv320 - 1400 cfm [free air cfm rating Kaiv322 - 2720 cfm [free air cfm rating Kaiv340 - 3820 cfm [free air cfm rating Kaiv3702 - 5450 cfm [free air cfm rating 28" hg maximum vacuum Air injection cooling Low pulsation tri-lobe impeller design Large oil sumps for increased bearing lubrication Robust reinforced main housing - quiet operations Kaiv320= wooden box packing, lot size: 4 nos, dimension: 45"x41"x25", gross weight: 600 kgs
Roots blower Bore: 50~500mm Flow capacity: 0.5~420m3/min Pressure rise: 9.8kpa~98.8kpa Vacuum: -49kpa Roots blower, sometimes called a positive displacement, or pd blower, is a machine which "pushes" a relatively constant volume of the gas handled at the inlet through to the discharge. It applies to conditions requiring high vacuum or high pressure especially in the waste water treatment plant. The main purpose of the blower is to provide constant flow of gas at different pressures. The blower consists of a cast iron casing in which two rotors with conjugate shapes rotate and are synchornised by a set of timing gears. During rotation, there is no contact between the lobes or between the lobes and the casing. Greentech international (zhangqiu) co., ltd Add: mingshui, zhangqiu city, shandong, china 250200 Tel: 86-531-83117088 Fax: 86-4006358835 ext. 15523 Cell: 86-15306415523 Wooden case
BrandHuadongModelHdsr-125 ItemRoots blowerTypeHdsr series three lobes Flow rate5.37-11.78 m3/minPressure9.8-58.8 kpa Motor power2.2-18.5 kw Frequency50hz, 60hzVoltage380v, 400v, 415v Bore125mmDimension1060*610*1410 Drive typeDirect coupling or belt transmission Cooling typeAir current Weight280-295kgPackage dimension1280*760*560 Features: 1 positive displacement blower, no compression, air conveying is smooth, there is small flow rate changes along with pressure changes. 2 tri-lobe linear-shaped impeller making inlet and outlet pulsation quiet with low noise and vibration. 3 special impeller of mesh curve and small enclosure making roots blower high efficiency, low energy consumption. 4 small size, light weight and elegant appearance. 5 with high-precision synchronous hard-toothed surface gears ensure long life. 6 much cleaner with no oil Usage: sewage treatment, flour, aquaculture, pneumatic conveying, electric power and cement industries etc. Accessory: suction silence (with air filter). Discharge silence, safety valve, pressure gauge, cock, vibration-isolating base, rubber vibration isolator, expansion joint, check valve, gate valve Payment terms: 30% t/t in advance, 70% t/t against copy of b/l L/c at sight Delivery time: within two weeks. Non-fumigation wooden box: 1280*760*560mm
capacity:0.61-184m3/min pressure:9.8-196kpa motor power:0.75-750kw usage:water treatment, power plant, cement plant, pneumatic, fish pond, aquaculture Payment terms: T/T (30% in advance and 70%balance before delivery),L/C Delivery time: common 20days after get the advance payment Package: Standard exporting wooden box packing or in clients indications Certificaton:CE
Roots blowers are used in numerous industries and industrial processes, including pneumatic conveying. Roots blowers play a vital role in many manufacturing and processing systems. Roots blowers are technically known as "positive displacement rotary blowers" and are commonly referred to as "blowers". What does a Roots blower do? Roots blowers are used to produce a constant airflow that is independent of the exhaust pressure conditions. The application of Roots blowers is limited to low and medium pressure and vacuum processes, and can be used to provide small to large airflow rates. How does a Roots blower work? Roots blowers consist of two identical and symmetrical rotors with two or three meshing blades in a sealed housing. The housing is valveless, and the air inlet and exhaust ports are usually located on opposite sides. The rotors rotate in opposite directions and are synchronized using a set of gears. The air is displaced from the inlet to the outlet by the movement of the meshing blades on the counter-rotating rotors. The airflow rate produced by the displacement is mainly determined by the rotational speed of the rotors within the Roots blower. There is no change in the amount of air within the Roots blower, so no air compression occurs. Roots blowers are typically air-cooled, and some models do not require oil as a lubricant (oil-free).
Roots Blower For Sale The Roots blower is a volumetric fan, with impeller end face and front and rear end covers of the fan. The principle is to use two blade shaped rotors to move relative in the cylinder to compress and transport gas in a rotary compressor. This type of blower has a simple structure and is easy to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable for gas conveying and pressurization systems in low pressure situations. It can also be used as a vacuum pump, etc. Type of Roots Blowers for Sale Roots Vacuum Pump Roots vacuum pumps have been applied in petroleum, chemical, plastic, pesticide, turbine rotor dynamic balance, aerospace space simulation and other devices, so they should be vigorously promoted and applied in China. It is also widely used in industries such as petroleum, chemical, metallurgy, and textiles. Rotary Air Blower Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has large air volume, energy saving, and silent operation that other forms of fans cannot compare with.). Smooth operation and convenient installation (for small models, as long as they are properly placed, the vibration is minimal and there is no need to install anti vibration devices, making installation convenient). Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume changes very little with the pressure change). Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation). The material is excellent, the structure is clever, and the performance is stable (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, the performance is stable, and there are few long-term failures). Simple maintenance, few faults, and long service life (low speed, low wear, and long service life).
AirMMax roots blower is three lobe type roots blower with pressure reaching up to 150kpa in single stage roots blower and pressure reaching up to 200kpa in double stage roots blower, air capacity reach up to 30000m3/hour, which cover most water treatment plant, sewage treatment plant and effluent treatment plant in industrial and municipal wastewater treatment plant. Roots blower inculds: blower body motor , base , inlet sliencer, outlet sliencer, safety valve, pressure gauge, check valve, flexible joint, belt cover, bolts&nuts
Three leaves roots blower : **structure diagram of three leaves roots blower: **characteristics of three leaves roots blower: 1.As a result of the use of three-leaves rotors and a box with a spiral, so the noise vibration of the roots blower is small. 2.Impeller and shaft as a whole structure, and no impeller wear, the performance of roots blower lasting unchanged, can long-term continuous operation. 3.High speed and high efficiency, and the structure is very compact. 4.Simple structure, due to adopt a special bearing, superior durability, 5.Model complete, can choose according to use selection. **application of three roots blower: The roots blower is used for electricity, mining, chemical metallurgy, environmental protection, light industrial building materials, flour pneumatic conveying aquaculture **the company strength of fengyuan: Fengyuan machinery is a manufacturer and supplier of producing roots blower, of which the key parts are processed and made precisionly by cnc processing center and special equipment . Main products are fsr, fr, ftr series roots blower, multi - stage centrifugal roots blower, single stage high speed blower, air high-speed centrifugal roots blower and fh series rotary blower, totally 7 series 200 kinds of products. Company covers an area of 35, 000 square meters, with senior technical staff of more than 30 people, more than 5800 million in fixed assets. We have more than 10 years of experience in blower designing and processing, and have got several national patents.Which enforce the connection with multiple academies, and build a cooperation of science and technology. In domestic sales markets, there are mroe than 20 provinces and cities, in foreign sale markets, the products have been sold to many countries , like southeast asia, thailand, malaysia, bangladesh.Vietnam, myanmar, india, pakistan, russia, brazil, south africa...…
Model:MTRR series Capacity:0.61-428 m3/min Pressure rise:98-196kpa Motor power:160-1250kw Usage:pneumatic.transportation,conveying, delivery
Model:RSR series Capacity:0.61-184m3/min Pressure rise:9.8-98kpa Motor Power:0.75-280kw Usage:sewage treatment, wastewater treatment, water treatment, domestic sewage treatment
The MTRH series Capacity:480--1059m3/min Pressure rise:9.8-98kpa Power:160-1250kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
The MJSR series Capacity:2-94m3/min Pressure:9.8-98kpa Power:2.2-220kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
The MTRR series Capacity:0.61-428m3/min Pressure:98-196kpa Motor:5.5-1000kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
The RSR series Capacity:0.6-184m3/min Pressure:9.8-98kpa Motor:0.75-280kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
The MTS series Capacity:94-119m3/min Pressure:19.6-98kpa Motor:3-200kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
The MTRF series: capacity:71.6m3/min pressure:9.8-98kpa motor power:30-355kw voltage:220-10000V Frequency:50hz/60hz price:$999-$9999/set FOB Qingdao Port Delivery time:common 20day after receive the payment. Packge:standard exported wooden box payment:T/T;L/c
Specification of RSR Series Roots Blower 1.All models of RSR series RSR-50 RSR-65 RSR-80 RSR-100 RSR-125 RSR-150C RSR-150A RSR-150 RSR-175A RSR-175 RSR-200H RSR-200 RSR-250D RSR-250 RSR-300 RSR-300C 2.Size of Discharge Bore 50(2â?³)ã?�65(2.5â?³)ã?�80(3.15â?³)ã?�100(4â?³)ã?�125(5â?³)ã?�150(6â?³)ã?�200(7.8â?³)ã?�250(9.85â?³)ã?�300(11.8â?³) Or in customers indication range 3.Differential pressure scope 9.898kPa 4.Air capacity scope 0.6184m3/min 5.Power of the motor 0.75280kW NECESSARY STANDARD ACCESSORIES Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
Specification of MTS Series Roots Blower 1.All models of MTS series MTS-11 MTS-12 MTS-21 MTS-22 MTS-23 MTS-31 MTS-32 MTS-33 MTS-41 MTS-42 2.Size of Discharge Bore 65(2.5â?³)ã?�80(3.15â?³)ã?�100(4â?³)ã?�150(6â?³)ã?�200(7.8â?³)ã?�250(9.85â?³) Or in customers indication range 3.Differential pressure scope 19.698kPa 4.Air capacity scope 3.94119 m3/min 5.Power of the motor 3200kW NECESSARY STANDARD ACCESSORIES Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
1.All models of RSR seriesï¼?RSR-50-300c 2.Size of Discharge Boreï¼?50-300Or in customerâ??s indication range 3.Differential pressure scope 9.8-98kPa 4.Air capacity scope 0.6-184m3/min 5.Power of the motor 0.75-280kW NECESSARY STANDARD ACCESSORIES Tuyere take over;entrance&exiting silencer(with air filter);flexible connector;check valve;foundation bolt;deflating valve;pressure gauge;base;gear oil
