RO Membranes are semipermeable membranes used in Reverse Osmosis systems to filter out dissolved solids, impurities, and contaminants from water. They play a crucial role in producing high-quality purified water for drinking, industrial applications, and wastewater treatment by allowing only water molecules to pass through while rejecting larger molecules and ions.
Model: HY-BW30-4040 Effective membrane area: 78ft2 (7.5m2) Operating pressure: 100pis (0.69mpa) Average water production: 3000gpd (11.3m3/d) Desalination rate: 99.0% Recovery:15%.
Specifications 1.Model:LP21-4040 2.Reject(%):99.5 3.Average Permeate GPD(m3/d):2400(9.1) 4.Active Membrane Area ft2(m2):85(7.9) The LP (low pressure) series of aromatic polyamide compound membrane element developed by Vontron Technology Co., Ltd. has the properties of low-pressure operation, high permeate flow and excellent desalination and are applicable to desalination of brackish water. Besides, it is particularly applicable to fabrication of high-purity water for electronic industry and electric power industry owing to its excellent performance in removing soluble salts, TOC, SiO2, etc. Being suitable for desalting such water sources as surface water, underground water, tap water and municipal water, etc., LP series is mainly applicable to treatment of various industrial water such as industrial-purpose pure water, boiler water replenishment in power plant, and can be also applied to such brackish water applications as treatment of high-concentrated saline wastewater and production of beverage-purpose water.
Ro membrane All our ro & nf membranes are made of filmtec membrane sheet, so they have the same quality as filmtec membrane, but they are much cheaper. We have many standard sizes membranes, such as tw30-1812-50, tw30-1812-75, tw30-2012-100 for home drinking water system; tw30-4021, bw30-4021, tw30le-4040, bw30le-4040, tw30xle-4040, bw30xle-4040, bw30-365, bw30-400 for industrial use. Sw30-4040, sw30-2540 for purifying sea water etc...At the same time, we can do some customized membrane, such as tw30-2012-150, tw30-2812-200, tw30-3012-300 Carton
RO Membrane GPD: 75/80/100/300/4021/4040/8040 works upto TDS : 1000/2000/3000/5000 Good Quality,High Flow
All Kinds of RO Membrane
commercial Application: - Drinking water. - Softened water for homes, hotels, commercial laundries and car wash. - Spot free rinse for window cleaning and solar panel cleaning - Pure water for pharmaceuticals, laboratories, Hemodialysis and electronics - Sterilisers and autoclaves. - Chemical industry. - Aquarium water treatment. - Boiler and cooling towers make-up water. - Pure water, boiler water replenishment, foodstuff processing, and pharmaceutical production.
ro membrane sheet
GeYi seawater ro membrane GeYi nano membrane GeYi Acid alkalinity resistance membrane
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant) Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc. Operating Limits and Conditions of Membrane Element Max. Working Pressure 600 psi(4.14MPa) Max. Feed Water Temperature 45 Max. Feed Water Flow 17.0m3/h(8040),3.6m3/h(4040) Max. Feed Water SDI15 5.0 Free Chlorine Concentration of Feed Water 0.1mg/L pH Range of Feed Water during Continuous Operation 3-10 pH Range of Feed Water during Chemical Cleaning 2-12 Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
KeenSen BW and FR Series: Brackish Water and Fouling Resistant RO Membrane Element Model No.:BW-8040/4040, BW-8040FR/4040FR(Fouling Resistant) Usage:It is applicable to the desalination of surface water, groundwater and water treatment with salt concentration between 2000 and 8000ppm. It can be widely used in the medicine, chemical industry, beverage, electricity and other various industries etc. Operating Limits and Conditions of Membrane Element Max. Working Pressure 600 psi(4.14MPa) Max. Feed Water Temperature 45 Max. Feed Water Flow 17.0m3/h(8040),3.6m3/h(4040) Max. Feed Water SDI15 5.0 Free Chlorine Concentration of Feed Water 0.1mg/L pH Range of Feed Water during Continuous Operation 3-10 pH Range of Feed Water during Chemical Cleaning 2-12 Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
Ro membrane 4040
Ro membrane 8040
Product features and advantages Sws191 is one kind of alkalinity antiscalant. Can be used to control the fouling of membrane separation system and reduce particle clogging. Can control the formation of calcium carbonate, calcium sulfate, barium sulfate, etc.. It can prevent the scaling of calcium carbonate when lsi reaches 3. Sws191 applies to all major reverse osmosis membranes. No adverse effects on the environment, especially suitable for the district where has special requirements on wastewater discharge. Typical properties Appearance clear colorless liquid Specific gravity 1.3-1.35 Ph(5% water solution) 10-11 Odor slight ammonia Adding and controlling Sws191 should be continuously added to the last level security filter. This product should be injected into the water supply pipe by diluting water tank or packing barrel. The operation parameters of the specific dosing ratio depends on the water quality and membrane system.You can ask dosing software or technical personnel determined. Safety Do not touch eyes and skin.More information please see the msds. Packing Conventional packaging for 25kg plastic barrels or ibc barrels. If you have special needs, please contact your sales consultant. -
Leading ro membrane technolgoy company: 1. More wide range of ro membrane and variety. 2. Ro membrane material more presion. 3. High dension layer ro membrane flatsheet*sheet polyamide. 4. More professional technique guilde. 5. More quality guarantee. 6. More complete and perfect after sale service Used range: Chemical, oil, hospital, water treatment, water purifier, concentration.
Industrial RO Membrane Elements SPECIFICATIONS: Model:RU4040, RU4021, RU8080, RL4040, RL4021, RL8040 Adapted Pressure RU 150psi, RL 225psi Salt Rejection 99.5%-98.5% Flow Rate(GPD) 2100,850,10500,2300,950,11000,
Nanovela are Household and Industrial RO Membrane Manufacturer,we have more than 20 years experience in water treatment filed.Nanovela RO membrane have more stable performance and longer life under high TDS feed water.Nanovela have M.A.T.P(massive adaptive testing platform) .Except 100% vacuum test,we also do random water test to make sure RO membrane good quality.We are a Chinese RO membrane manufacturer expert!
Nanovela are Household and Industrial RO Membrane Manufacturer,we have more than 20 years experience in water treatment filed.Nanovela RO membrane have more stable performance and longer life under high TDS feed water.Nanovela have M.A.T.P(massive adaptive testing platform) .Except 100% vacuum test,we also do random water test to make sure RO membrane good quality.We are a Chinese RO membrane manufacturer expert!
Nanovela are Household and Industrial RO Membrane Manufacturer,we have more than 20 years experience in water treatment filed.Nanovela RO membrane have more stable performance and longer life under high TDS feed water.Nanovela have M.A.T.P(massive adaptive testing platform) .Except 100% vacuum test,we also do random water test to make sure RO membrane good quality.We are a Chinese RO membrane manufacturer expert!
Filmtec Seawater 4040 Ro Membrane 4040 Ro Membrane Benefits Reverse Osmosis Membranes Remove up to 99% Of Total Dissolved Solids. RO Membranes Remove Dissolved Impurities Such As Chloride, Lead, Chromate, Fluoride, Bacteria and Others. High Rejection TM700 Series Ultra Low Pressure TMH and TMG Series Low Fouling And High Tolerance TML Series High Rejection TM800 Series, for Sea Water Applications High Pressure & Rejection TM800H Series, for High Salinity Sea Water Applications
