Find Verified Reinforcing Wire Mesh Suppliers, Manufacturers and Wholesalers

Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long term and trouble-free building operation. Reinforcing mesh is made of class AI and AII rebars and low carbon indented steel wire. can be made in any size you want.

Reinforcing wire mesh

Reinforcing construction mesh is one kind of new structural purpose wall material, it may substitute the brick wall to make each kind of bearing wall, the non- bearing wall and the floor, the balcony and so on. It has the expanded building useable area (10%-15%), the heat insulation, sound-insulated, the earthquake resistance, the waterproofing, the construction is simple, is self-possessed lightly and so on the characteristic, at the same time reduced the project construction cost greatly.

Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long-term and trouble-free building operation. ... Reinforcing mesh is made of class AI and AIII rebars and low-carbon indented steel wire.can be made in any size you want.

Concrete reinforcing wire mesh
Aluminum formwork
Aluminum alloy formwork
Concrete panel formwork
1.Material: steel bar, iron rod
2.Wire diameter : from 3mm to 16mm.
3.Panels opening: the horzontal from 50mm to 200mm,
The vertical from 25.Mm to 500mm.
4.Panel length: 1.0m to 12m.
5.Panel width: 0.5m to 3.0m.
6.Features: solid construction, easy handling,
7.Packing: pvc shrink, moister-proof paper, carton, pallet,
Wooden box ,
Special packing can be arranged upon request

K188/K335 reinforcement wire mesh
Anping Heyou Wire Mesh Products Co.Ltd can supply reinforcement wire mesh conformance with Swiss Standard SIA 16211 S550.
Its has widely useage for foudations beams,slabs,walls,columns,foundation slabs,footings,tunnel,coal and mine,subway tunnel etc. The mesh spacing is 150mm,and normal sheet size is 2m*5m.
The skatch of K188/K335 reinforcement wire mesh

NL= Number of longitudinal bars
PL= pitch of longitudinal bars
dL= diameter of longitudinal bars
NC=Number of transverse bars L= length of longitudinal bar
B=Length of transverse bar
u1=Overhang of longitudinal bars
u2=Overhang of longitudinal bars
The specification of reinforcement wire mesh conformance with Swiss Standard SIA 16211 S550
mesh type Pitch of wires(mm) diameter of wire(mm) Per meter area sqm/m Dimension of Mesh Area of Mesh(sqmm) Mass (kg/sqm) Weight of Mesh(kg)
pL pC dL dC long cross L(mm) B(mm)
K188 6 6 150 150 188 188 5000 2000 10 3.091 30.192
K335 8 8 150 150 335 335 5000 2000 10 5.372 53.72
Z248.5 6/4.5 7 150 150 248 257 5000 2000 10 3.422 34.22
Z248.6 6/4.5 7 150 150 248 257 6000 2000 12 3.472 41.668
Z348.5 7/5.5 8 150 150 348 335 5000 2000 10 4.628 46.28
Z348.6 7/5.5 8 150 150 348 335 6000 2000 12 4.694 56.326
Z442.5 8.0/6.0 9 150 150 442 424 5000 2000 10 5.857 58.57
Z442.6 8.0/6.0 9 150 150 442 424 6000 2000 12 5.94 71.282
Z558.5 8.5/7.5 10 150 150 558 524 5000 2000 10 7.315 73.15
Z558.6 8.5/7.5 10 150 150 558 524 6000 2000 12 7.418 89.014

The details of the reinforcement wire mesh as below:

Apparent three face indentation om the surface The weld spot firmly and strong

Homogeneous mesh space Flat mesh surface
The inspection of the reinforcement wire mesh

The wire diameter inspected by micrometer The mesh space messured by bemier caliper

The width messured by flexible rule The length messured by flexible rule

The Tensile strength and yield stress inspected by tensile machine weld shear resistance test

The packing and shipment

The bundle of sheet size 2m x5m Shipment for loading container
Application site of reinforcement wire mesh

Reinforcement wire mesh used on bridge and pier Reinforcement wire mesh used on construction footing foudation

Reinforcement wire mesh used on flooring slabs Reinforcement wire mesh used on foudation beams

Wire diameter for welded steel bar panels:
ranges from 5mm to 12mm
Welded bar panels opening:
50mm to 300mm
Panel length:
100cm to 1200cm
Panel width:
100cm to 300cm

Reinforcing Welded Wire Mesh
1.Reinforcing mesh Material: 
1)Cold-rolled steel ribbed rebar
2)Cold-rolled steel round rebar
3)Hot-rolled steel ribbed rebar
2.Reinforcing mesh Wire diameter: 5mm to 16mm.
3.Reinforcing mesh Opening: 75mm to 300mm.
4.Panel length: 100cm to 1400cm.
5.Panel width: 100cm to 300cm.
6.Features: Steel bar grating costs less time and labor in work. It saves about 50 to 
70 percent work time compared with common binding wire mesh. The use of bar 
grating can also strengthen the concrete parts to reduce surface breaking ratio. 
Welded bar grating for reinforcement is especially suitable for big area concrete 
engineering. Using of welded bar reinforcement can save about 10 percent of the 
total cost of the project.
7.Applications: Welded steel bar panels are widely used in construction reinforcemet,the ground for the tunnels, bridges, highway, airport and wharf, also in construction 
of wall body.
Reinforcing mesh panel size is 2.4 x 6m (for Australia standard),including SL52-SL102 reinforcing mesh and trench mesh. Other specifictions also could be customized.
 
Reinforcing Fabric BS 4483 standard, sheet 4.8mx2.4m

-

we can offer galvanized or PVC coated welded wiremesh, in roll or in panel

Reinforcing mesh also called: welded steel mesh, steel welded mesh, steel bar welded mesh, steel welded mesh strip, steel mesh piece, etc. It is a mesh of longitudinal reinforcement and transverse reinforcement that are arranged at a certain distance and are welded together at right angles and all intersection points.
Material: Q195
Size: 100*100

Welded Wire Mesh Material

stainless steel wire,low carbon steel wire,galvanized steel wire

Welded Wire Mesh Style

Stainless steel wire welded wire mesh

Electro or hot dipped galvanized after or before welding

PVC coated galvanized welded wire mesh

Black wire/ no coated welded wire mesh

Welded Wire Mesh Features

Made of high quality steel wire.

Various configurations and sizes.

Used for the loose strata to avoid falling rocks.

Suitable for shotcrete applications

Range of sizes to suit roadway width and bolting patterns.

-

Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is widely used for wall warm keeping, wall material and cement reinforcing, surface decorating, mosaic back mounting, crack repairing and so on.

Brief Descriptions:
1.Material: Fiberglass woven
2.Uses: It reacts important affect in heat preservation system, prevent crack.
3. Package: Bags or as customers request.
4. Colors: white (standard), blue, green, or other colors.

Characteristics
It has excellent properties like high alkali-resistance; good cohesion, flexibility, tensile strength, etc. Coated fiberglass mesh can be widely used in wall heat reservation system, water-proof and preventing cracks.



Plastic , or carton box , or do as customer's requirement

we are able to offer a superior quality range of Reinforcement Mesh. All our products are available in various sizes, designs, and shapes at market leading prices to meet the demands of customers.

Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company.
The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump

All types and sizes of expanded metal mesh are available.

Wireharness for auto, airspace and equipment

The KARAM PN-44 Full Body Harness is a safety harness designed for workers performing at heights. It features adjustable straps for a secure and comfortable fit, and is made with durable materials for long-lasting use. It also has multiple attachment points for tools and equipment, making it ideal for a variety of job sites and applications. The harness is tested and certified to meet industry standards, providing peace of mind and ensuring the safety of workers while they work at heights.

3000W RAYCUS Handheld Laser Welder Fiber Laser Welding Machine Wire Feeder Inculded

Wavelength ::::::: 1070-1080nm
Integrated Cable Length ::::::: 10-12m
Machine cabinet :::::: 600x1200x1200mm
Scan Width ::::: 0-120mm
Welding speed ::::::: 0-120mm/s
Power range ::::::: 10%-100%
Weight ::::::: 180kg
Power consumption ::::::: 3.5KW
Welding depth :::::::: 0-20mm
Laser frequency :::::: 50-5000KHZ