We are supplier of Reinforcement Bars. can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available. hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Art No : SGCGL103A Type : Industrial Welding Gloves with Reinforcement palm Leather : Industrial Welding Gloves with Full Lace for thread protection Leather Thickness : 1.0, 1.1 mm Size: 12/14/16/18 Inches Packing : 10pairs in Polybag and 100 pairs/Carton Grade : Available in AB
Disposbale Reinforced Non Woven Sheet 82"X47" Large, Blue, Eo Sterilized, Individually Packed
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Australian coal, australian diesel, brazilian sugar, construction steel, lng (liquified natural gas).
Aneealed wire, steel wire, low-carbon steel wire of general purpose, gost 3282-74 (din 177); low-carbon steel wire of general purpose, heat-treated, gost 3282-74 (din 177); low-carbon cold-drawn wire for reinforcement of ferroconcrete structures, gost 6727-80; welding wire of low-carbon steel, sv08a, gost 2246-70 (din 17145); splint pin, reinforcement mesh, hardware.
Fiberglass rebar area of application Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of: Foundation; Marine and port facilities; Reinforcement of concrete tanks; Repair and strengthening of bearing capacity of brick and reinforced concrete structures; Road slabs, airfield slabs; For the production of small architectural forms; For the road paving and decking of highway bridges; The implementation of the infrastructure elements in the chemical industries; Repair of damaged brick and reinforced concrete structures; Fittings are used for constructions based on gypsum binders; Construction of swimming pools and industrial pools; The application of fiberglass fittings in civil and industrial construction is caused by many variables: Low specific gravity; High corrosion resistance; Low thermal conductivity of composite materials; High strength, several times the strength of steel fittings; Is a dielectric; Durability; As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
High torque Rock bolt nut Rockbolting couplers Rebar couplers heavy fasteners construction equipment
The reinforced impervious zones on the arm & chest offers superior strength and protection against strike- through. It also provides the extra level of comfort needed for extended surgical procedures
Alkali-resistant fiberglass mesh fabric for reinforcing cement, slabs, plaster, etc. for exterior insulation finishing system (eifs), alkali-resistant fiberglass reinforcement mesh and mat combined mesh for waterproofing roofing system, fiberglass reinforcement mesh fabric for grc wallboard or laminate panels in architectural applications, fiberglass reinforcement mesh fabric for fire-resistant application, fiberglass self-adhesive mesh tape for drywall joint or repair, wall patch corner tape, glass-wool ceiling, fiberglass printing mat, Fiberglass decoration cloth, drywall sanding screen (abrasive open mesh), sanding sponge, fiberglass wall covering, fiberglass laminated bopp tape.
Product Description Splash protection and protection against germs Formaldehyde/Arylamine/Nophenol Skin irritation that passed the hazardous substance test No advanced filter" Price of product ( USD price or FOB price) : 160 Product origin : Korea Key Specifications/Special Features : 1. Easy-to-breath non-woven triple filter 2. High elasticity ear band to minimize stomach pain use 3. Use nose band to prevent fogging. 4. Three-fold structure that can be worn to fit your face." Minimum Order Size and Packaging details : Minimum order: 100,000 or more
Deformed Bar : 8mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 29mm, 32mm Plain Bar : 8mm, 10mm, 12mm, 16mm ASTM A615, ASTM 706, BS4449, JIS 3112,
plain Bar : 8mm, 10mm, 12mm, 16mm Deformed Bar : 8mm, 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 29mm, 32mm ASTM A615, ASTM 706, BS4449, JIS 3112,
PP reinforced with 15-35% glass fiber compound, for injection. For information regarding price and other characteristics, please contact us.
PP reinforced with 15-35% glass fiber compound, for injection. For information regarding price and other characteristics, please contact us.
PP reinforced with 15-35% glass fiber compound, for extrusion. For information regarding price and other characteristics, please contact us.
PP reinforced with 15-35% glass fiber compound, for injection. For information regarding price and other characteristics, please contact us.
Woven fabric,woven roving,multiaxial fabric(unidirectional,double bias,biaxial, triaxial,quadraxial),fiberglass surface mat,fiberglass needle mat,fiberglass stitched mat,chopped strand mat,fiberglass continuous strand mat,woven roving combo mat,fiberglass core combination mat,etc. Widely used in boat manufacturing,wind energy,FRP piping,sports devices,public facilities,etc Standard export packing
Iso 9001-2000 Sgs As/nzs4671-2001 Standard packing or as required
