Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Permeabilty/wvtr = (astm e96-80), g/h/m²) = max 0.01 Water resistance = no delamination Vapor resistance = excellent Tear resistance = good - using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier. - reinforced with special fiberglass scrim for higher mechanical product strength. - special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties. - resistance to moisture, mold and fungi. - no change of performances over time due to compaction, disintegration or moisture absorption. - light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability. - no crumbling material / non-itchy - eco friendly. - characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate. Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Basic weight (g/m²) = 220 ± 10% Tensile strength (astm d 828) knm = md: 14 - 16; xd: 10 – 12 Corrosion or delamination (95% rh @ 50°c, 30 days) = none Vapor resistance = excellent Tear resistance = good Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Basic weight (g/m²) = 160 ± 10% Tensile strength (astm d 828) knm = md: 6 - 8; xd: 6 – 8 Tear resistance = good - using 99% pure aluminum foil with high reflectivity & low emissivity surface is the most effective radiant barrier. - reinforced with special fiberglass scrim for higher mechanical product strength. - special bonding layer combined with aluminum foil giving it superior vapor barrier & fire retardant properties. - resistance to moisture, mold and fungi. - no change of performances over time due to compaction, disintegration or moisture absorption. - light weight but high tensile strength with special fiberglass scrim reinforced - installation friendly & durability. - no crumbling material / non-itchy - eco friendly. - characteristics of this product is not easily change & is stable & will not delaminated when exposed to high temperature/high humidity of tropical climate. Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Basic weight (g/m²) = 160 ± 10% Tensile strength (astm d 828) knm = md: 6 - 8; xd: 7 – 9 Water resistance = no delamination Vapor resistance = excellent Tear resistance = good - double sided aluminum foil (99% of pure aluminum foil) reinforced with fiberglass scrim. - certified for fire retardant class 'o' (bs476 part 6 & part 7). Impermeability to moisture & vapor maintains even when creased. - characteristics of these product are not easily changed by hot roof temperature/high humidity of tropical climate & is stable & will not delaminated when exposed to moisture from hvac ducting. Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Basic weight (g/m²) = 160 ± 10% Vapor resistance = excellent Tear resistance = good Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Reflective insulation, radiant barrier, vapor barrier, thermal insulation.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
HIPS Regrind White-Mix Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology. Common HIPS applications: In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements. Make coating HIPS plastic film to increase water vapor and gas resistance. Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss. Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers. Making pharmaceutical bottles, pipes, cap for solvent containers. Making high-frequency insulating materials, insulation clamps. Making imitation leather sandals, textile packaging. Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray. MATERIAL: HIPS Regrind White-Mix CATEGORY: HIPS TYPE: Regrind White-Mix SPECIFICATION Product- HIPS regrind post production from Yogurt caps Contamination â?? up to 2% foil metalizing (cover of the yogurt caps). Food grade material Post - industrial Sheet Extrusion & Vacuum forming Origin: Spain LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
HIPS Regrind from post consumer materials Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology. Common HIPS applications: In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements. Make coating HIPS plastic film to increase water vapor and gas resistance. Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss. Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers. Making pharmaceutical bottles, pipes, cap for solvent containers. Making high-frequency insulating materials, insulation clamps. Making imitation leather sandals, textile packaging. Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray. MATERIAL: HIPS Regrind from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: HIPS TYPE: Regrind SPECIFICATION: Hips from post consumer materials.Yes No Fr, NO pc abs, no iron, no circuit etc. Hips per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
One-way mirror is a kind of high reflectance visble light glass,under the weak light environment ,can observed clearly has a strong ligh strong light sournce enbironment . One-way mirror widly be used for interrogation room, high-end bar, toilet , hospital ,outdoor ecological room,and other special places. One-way mirror can be edge grinded bent,tempered,laminated ,insulated.
"Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however, radiant barriers do not necessarily protect against heat transfer via conduction or convection.." Following benefits Characteristics: Based on reflection means low emissivity (blocks heat and moisture) Reflects most of radiation heat (blocks 97% of radiation heat) Light Weight, no degradation, lasts life long Easy and fast installation, No spacers required Environment friendly - Non-toxic / non-carcinogenic No Wire mesh needed, saves time and money Cost-effective and versatile. Easy to install Fibre-Free Class A / Class 1 Fire Rating Inhibits condensation Resists growth of fungi, mold and mildew Does not compress, collapse or disintegrate Lowers heating and cooling costs year-round Vapor and radon retarder Not affected by moisture or humidity ISO 9001:2015Manufacturing location Our range of Reflective Insulation Materials products include Patidar Manufactured Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminium Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application: Roof Insulation Foil Insulation for Cold Chain supply Pre Engineered Building Insulation Thermal Insulation Fibreglass Insulations Under Roof Insulation Foil Wrap Insulation Aluminium Foil Insulation Home Insulation Metal Building Insulations materials Reflective Barrier film Reflective Insulation Material Heat Insulation Material Radiant Barrier FOIL HVAC Insulation Livestock Insulation Materials Farming Insulation Poultry Farm Insulation Mobile House Insulation Building Insulation Factory Shed Insulations Insulated Foil For Export Packaging
Uniform distance of Vertical lines(wide=3mm)obscure details, linear texture can keep space organized,.clean friendly. Patterned Glass is a kind of special processed translucent decorative glass with single-sided or double-sided embossed during the production. Its unique Decorativeness, which on one hand lets the light through fully, on the other hand, prevents the perspective effectively, creating an excellent appearance and hidden effects. Thickness:3mm 3.5mm 4mm 5mm 6mm Size: 1830x2440mm 2000x2440mm,2000x2800mm,2000x3300mm, max size 2134x3660mm
Bubble / Foam insulation provides the maximum efficiency in controlling heat transfer as the air space built between the layers of foil works to keep radiant heat from penetrating a structure from the outside, and the radiant foil reflects interior heat back into a structure from the inside. Even though you get single bubble and double bubble insulation and 5mm to 25mm EPE Foam insulation. Technical Specifications: Three layer of air bubble film laminated with both side silver metalized aluminum film. Our Product is Specially Designed for construction, container insulation. insulated bags manufacturing etc. Standard Size : 1.2mtr x 100mtr Bubble Size : 4mm x 10mm Nominal Thickness : 3.5 to 4mm Reflection Ratio : 96% Thermal Resistance Emissivity : 0.04-0.05
Polynum Ultra: Pure aluminum foil laminated with two layers of double polyethylene Big bubbles (8mm each layer, Fire Retardant) and internal reflection layer. The 16mm multi-foil/bubbles structure is laminated with two reflective aluminum layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our high resistance anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity, livestock buildings. Optional: 18 microns aluminum with bi-directional reinforced netting for extra strength. Polynum ULTRA Advantages: ***** HighThermal resistance (R-value 3.72) ***** Lightweight- therefore easy to apply * High performance * Moisture-proof, fungus, and mold-free ***** Does not attract nesting, rodents, birds, or pests* * Does not collect dust, does not retain bacteria, odors nor dirt. ***** Friendly User & Safe: No protective equipment such as gloves or breathing equipment is required for installation ****Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Cost Effective
LDPE Granules Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
Fire Fighter Helmet Specifications: 1. Kubba Tactical High-Strength helmet: This helmet is made of high-strength nylon material. It is very light and comfortable. It is also made � with six layers of fire insulation and heat radiation resistance. Because of this, the helmet can effectively protect the top of the head from external impact and high temperature. The full brim design can Prevent rain and sunlight from entering your eyes, making your work safer. 2. Adjustable helmet: This Kubba Tactical helmet can adjust the head circumference adjustment range to 53-63cm. This � can easily adjust the size of the helmet to suit different head shapes. The ventilation holes on the top can dissipate heat and ventilate, which is convenient and practical, and is suitable for most people to wear. 3. Reflective stripe design: It can provide the best vision when the vision is poor. The main body of the helmet with yellow + red reflective stripes can be clearly identified among members of the rescue team. Make it safer to use at night. 4. Multi-site application: The helmet is specially designed for outdoor operations, forest firefighting, traffic accident rescue, search and rescue, steep surface/mountain rescue, chemical leakage accident rescue, safety earthquake emergency kit. Suitable for private or professional use.
