How to Use 1), For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. 2), For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This highcarbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation
Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements. Moisture Content 2.60% Ash Content 38% Volatile Matter 6.76% Fixed Carbon Content 48% Total Sulphur 0.10% GCV 4072 kcal/kg
Grade: 1. Carbon Black PL330J 2. Carbon Black PL330C 3. Carbon Black PL330C 4. Carbon Black PL550C 5. Carbon Black PL550B 6. Carbon Black PL550C 7. PL660B Beads 8. Carbon Black P330 9. Carbon Black P550 10. PL772B Beads Purity: 1.OAN (ml/100 gm) >90 2.OAN (ml/100 gm) >90 3.OAN (ml/100 gm) >95 4.OAN (ml/100 gm) >100 5.OAN (ml/100 gm) >100 6.OAN (ml/100 gm) >100 7.DBP No (OAN) (cc/100 gm) >100 8.DBP No (OAN) (cc/100 gm) >100 9.DBP No (OAN) (cc/100 gm) >105 10.DBP No (OAN) (cc/100 gm) >90 Actual price will be provided after your enquire.
We are exporter of Activated Carbon. Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
ITO GLOBAL GRUOP, Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity. Our monthly supplying capacity 1000 ton 1-Carbon-95-97-% 2-Sulphur-0.95-% 3-Ash Content-1-% 4-V-M 0.30-% 5-Moisure 0.90-%
Water purification
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future.Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation
Appearance - Black Powder Particle size - 5-10 um Surface area - 2000 m2/g C content - >95%
Particle Size(mesh) - 4-8, 5-10, 6-12, 10-24, 8-30, 20-40 Packing Density (g/ml) - 0.45-0.55 Hardness (%) - 95 Ash Content (%) - 5 Moisture (%) -10 Iodine Value (mg/g) - 900-1250 PH - 6-9 Packaging Details 25kgs/bag, or 500kg/big bag
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
Specification: Carbon (C): 10.0% max; Moisture: 2.9% max; Loss on ignition: 13.4% max; Iron oxide (FeO3): 0.4%; Calcium oxide (CaO): 0.6%; Sodium oxide (Na2O): 0.2%; Potassium oxide (K2O): 3.5%; Sulfur trioxide (SO3): 0.8%; Silicon dioxide (SiO2): 70.2%; Aluminum oxide (Al2O3): 0.1%; Magnesium oxide (MgO): 0.4%; Appearance density after compaction: 0.24%.
