Rap4 Paintball Marker Suppliers and Manufacturers

China Markers used to be for industrial produts,like glass, furniture,ceramics,wood,metal etc.

Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.

Car front seat organizer. It is specifically used to store documents, portfolios, books, laptops, marker pens, signature pens and other work materials that you need to work at any time. Allows you to easily find the documents you need while keeping the environment in the car neat and tidy. Large capacity front seat car organizer width 33.5x43 cm height, which can accommodate notebooks, 14 inch laptop, 1 marker, four signature pens, hand sanitizer, 2 umbrellas or water glasses and other commonly used items. Both sides are equipped with buckles to expand the capacity, allowing you to flexibly adjust the capacity of the storage bag to the number of items stored. Separate laptop compartment. The front seat organizer of the car has a separate laptop compartment filled with EPE material of sufficient thickness. To prevent scratching of the computer, the inner compartment is made of soft suede material. High-quality workmanship. The storage bag for the front seat is made of high-quality 600D polyester, which is dustproof, wear-resistant and shiny. An X-shaped reinforcement sewing method is used on the handle connection, which has a strong support force and avoids tearing due to continuous winding. We use high quality thick metal zipper, smooth and not easy to damage. Double fastening straps always remain stable. To prevent the storage bag from shaking or dropping items while driving, the storage bag is equipped with two adjustable fastening straps. Installation method: Step 1: Simply install the short belt on the headrest, Step 2: Wrap the long belt around the back of the car seat to attach it.

Sharpie King Size Permanent Marker, Broad Chisel Tip, Black, Dozen Sharpie King Size Permanent Marker, Broad Chisel Tip, Black, Dozen - King-Size Permanent Marker marks on wet and oily surfaces. Durable aluminum barrel and felt tip stand up to heavy use. Water-resistant ink dries quickly. Excellent for marking corrugate, wood, metal, foil, stone, plastic, leather and more. Additional information Weight 0.82 lbs Type Permanent Marker Color (Barrel) Silver Ink Type Liquid Refillable No Retractable No Material (Barrel) Plastic Pocket Clip No Marker Point Chisel

Proteomics-based Early diagnosis using multiple markers provides a quick and accurate solution for early diagnosis of major diseases by utilizing multiple proteomic biomarker-based blood tests. Early diagnostic solutions BERTIS has commercialized MASTOCHECK, the worlds first proteomics-based blood test solution for early diagnosis of breast cancer, and clinical trials are being conducted on biomarkers for various cancers. Ultimately, these technologies are being used to continually expand the pipeline to allow dozens of diseases to be diagnosed with a single blood test.

EXPO Low-Odor Dry-Erase Marker, Broad Chisel Tip, Assorted Standard Colors, 4/Set EXPO Low-Odor Dry-Erase Marker, Broad Chisel Tip, Assorted Standard Colors, 4/Set - Expo Dry-erase marker contains specially formulated low-odor dry-erase ink. Perfect for classrooms, small offices and homes. Can be used on most whiteboards, glass and nonporous surfaces. Consistent color quality for bold colors and great erasability. Chisel point. Certified AP nontoxic and conforms to ASTM D-4236. Additional information Weight 0.17 lbs Type Dry Erase Marker Weight 3.20 oz Ink Type Solvent Based Pocket Clip No Grip Type Contoured Marker Point Bold Ink Color Assorted Part Number 80074

Factory price pharmaceutical grade refined 1,2,3-propanetriol glycerin glycerol and Glycerine USP 99.5% and 99.7% Glycerol is an organic compound, also called glycerin or glycerine. It is a colorless, odorless, viscous liquid that is sweet-tasting and non-toxic. It is is widely used in FDA approved wound and burn treatments. It can also be used as an effective marker to measure liver disease. It is also widely used as a sweetener in the food industry and as a humectant in pharmaceutical formulations. Glycerol has three hydrophilic hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature. The glycerol substructure is a central component of many lipids.

Guide wires are commonly used in medical procedures, particularly in cardiology and radiology, to guide catheters and other devices through blood vessels or other anatomical structures. The Terumo Radifocus Guide Wire M is likely designed for use in vascular interventions. Here are some general characteristics you might find in Terumo guide wires: Material: Guide wires are typically made of materials such as stainless steel or nitinol. Coating: Some guide wires may have hydrophilic or hydrophobic coatings to enhance their performance during navigation through blood vessels. Tip Design: The tip design may vary based on the intended application, with options like floppy or stiff tips. Diameter and Length: Guide wires come in various diameters and lengths to suit different procedures and anatomies. Radiopaque Markers: Radiopaque markers help visualize the position of the guide wire under fluoroscopy.

Key features and characteristics of the Bard Denali DL950F Vena Cava Filter may include: Retrievable Design: The Bard Denali DL950F is often designed to be retrievable, allowing for potential removal when the risk of pulmonary embolism has decreased. Cone Design: Vena cava filters typically have a cone-shaped design that helps to trap and prevent blood clots from traveling to the pulmonary arteries. Biocompatible Materials: The filter is typically made of biocompatible materials suitable for long-term implantation. Ease of Deployment: The deployment mechanism is designed for ease of use during the implantation procedure. Radiopaque Markers: Radiopaque markers are often incorporated into the design to aid in accurate placement under fluoroscopy or other imaging modalities. Compatibility with Imaging: The device is designed to be compatible with various imaging technologies, allowing healthcare professionals to monitor its position and effectiveness.

the Boston Scientific Promus Elite is a coronary drug-eluting stent system. It is designed for use in patients undergoing percutaneous coronary intervention (PCI) procedures to treat coronary artery disease. Here are some key features and points related to the Boston Scientific Promus Elite coronary stent: Drug-Eluting Stent: The Promus Elite is a drug-eluting stent (DES), meaning it is coated with medication to help prevent the re-narrowing (restenosis) of the treated coronary artery. Drug Coating: The stent typically features a polymer coating containing an anti-proliferative drug. This drug is slowly released over time to inhibit the growth of tissue inside the stent, reducing the risk of restenosis. Cobalt Chromium Alloy: The stent is often made of a cobalt chromium alloy, known for its strength and flexibility. This material allows for a thin stent strut design, which can be beneficial in terms of deliverability and conformability. Delivery System: The stent is delivered to the target area using a catheter-based delivery system. The catheter is guided through the blood vessels to the site of the coronary artery lesion. Radiopaque Markers: Radiopaque markers on the stent aid in proper placement and visualization under X-ray guidance during the procedure.

Material Number: M0031681890 Description: Straight, 2-tip marker Total / Distal Length: 150cm/6.0cm The Excelsior SL-10 Microcatheter with Thin Wall Technology and Lubricious Hydrolene�® Outer Surface is designed to provide outstanding performance 1.7F (0.56mm) Low Profile Distal Shaft, Excelsior SL-10 Microcatheter is designed with a low profile tip to enhance access to distal vasculature and ease of passage of the catheter trip through stent interstices. Atraumatic Distal Tip, Specifically engineered for atraumatic access, the rounded, low-durometer, unbraided tip offers exceptional softness and flexibility. Variety of Tip Shapes, Offered in six clinically relevant shapes to improve access and navigability.

the Cordis Emerald Guidewire is a product developed by Cordis Corporation, a subsidiary of Cardinal Health. Guidewires are medical devices used in various interventional procedures to navigate through blood vessels, providing access for other devices and treatments. Key features of the Cordis Emerald Guidewire may include: Material: The guidewire is typically made from materials like stainless steel or nitinol, which offer flexibility and support for navigating through the vascular system. Coating: Guidewires may have hydrophilic or hydrophobic coatings to enhance their lubricity, making it easier for them to pass through blood vessels. Tip Design: The tip of the guidewire is often designed to be atraumatic, reducing the risk of vessel injury during navigation. Radiopacity: The guidewire is often designed with radiopaque markers to aid in fluoroscopic visualization during procedures. Length and Diameter: Guidewires come in various lengths and diameters to suit different procedures and anatomies.