Qw Submersible Sewage Pump Suppliers and Manufacturers

Product introduction: QW submersible sewage pump is an energy-saving product based absorption of similar products both at home and abroad advanced technology in the digestion, the development of A. Product features: The pump has the advantages of small volume, compact structure, convenient installation, disassembly fast, has the characteristics of unique design; design of the impeller, volute chamber and reasonable, so that the sewage pump performance is very good, no blocking, anti winding ability. Technical parameters: Lift7-52m Flow5-3750m/h Field of application: Used in municipal engineering, pumping stations, construction and other industries with solid and long fibers of sludge, waste water, city sewage treatment; water supply device is also suitable for biogas digesters in rural areas, farmland irrigation, water plant.

QW/WQ Submersible Sewage Pump Application: Municipal works, Industrial buildings Hotels, Hospitals, Civil air defence Drain off the sewage, waste water, rainwater and living water containing solid grains and various long fabrics QW/WQ Submersible Sewage Pump Feather: 1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size). 2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material. Motor side: Ceramic/Ceramic Pump side: Silicon carbide/Hard Alloy 3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request. 4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action. 5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level 6). Movable and fixed installation optional, and double guide automatic rail available. 7. ) Motor: Insulation class: Class F, and protection class 58 Capacity range(m3/h) 5---3000 Head range(m3/h) 7---60 Outlet size(mm) 25---500 Power(kw) 0.75---250 Material: Cast iron, SS302,SS304,SS316 Shaft seal(mechanicalseal) SIC,TC, ceramic,graphite... Temp up to 120 degree PH 3-11 Installation Movalbe or auto coupling type Water leakage probe float switch.

180W, 1" outlet diameter, Max. flow with 133 l/min, Max. head with 7m, Max. diameter of particle with 15mm, Max. submersible depth with 5m, Maxi. fluid temperature with 40 liquid PH valve: 4-10, Class B, IPX8, 18.5*18*36.5cm for each piece and each carton, G.W. is 9kgs

Pump range: Capacity: 8 8980 m3/h Head: 3 60 m Speed: 495 / 590 / 730 /980 /1470 / 2940 rpm Power: 11kW 580kW Voltage: 380V, 6kV or 10kV Discharge Dia.: DN65 DN 1000 Medium Temp.: â?¤ 40 Degree Pump Weight: 128 10000 kg Description: The submersible sewage pumps can meet the needs in the aspects of municipal engineering such as flood control pumping station and integrated pumping station, building construction, industrial sewage, waste water treatment, environmental protection, irrigation etc. They can be used to convey sewage, wastewater and urban sewage which contain solid particles and various long fibers. Our submersible sewage pump can be installed by auto-coupling device (QDC), hard pipe and soft pipe, fixed and movable installation, and dry type installation with cooling jacket.

Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:

Flow: 7m3/h Head: 18m Power: 1.1kw Material: cast iron Outlet dia: 40mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries

Wq series submersible sewage pump is mainly used for municipal works, industry bulidings, hotels, hospitals, civil air defence, mines etc. Trade to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various fabrics. Service conditions: 1.Based on impellers as center, underwater depth doesn’t exceed 5m, 2. Transferred medium temperature doesn’t exceed 40? 3. Ph: 4-10, it can not transfer liquid with high corrosivity 4. Max density: 1200kg/m3 5. Wq series pumps are submersible pumps. The motor must run under the water. Wq series pump incude 9 series as follow: 1. Wq submersible sewage pump 2. Wq(o type) submersible sewage pump 3. Wq non-blocking submersible sewage pump 4. Wqs water-filled submersible sewage pump 5. Wqx bottom suction type submersible sewage pump 6. Wqk cutting type submersible sewage pump 7. Wqjy automatic mixed type submersible sewage pump 8. Wqx big flow quantity type submersible sewage pump for mining engineering 9. Wqd/wq whole stainless steel sewage pump

Hydroman Submersible sewage sludge pump is used for civil and industrial non aggressive waste water, municipal works, industrial buildings, hotels, hospitals, civil air defense, mines etc., suitable for drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics. Especially effective in returning activated sludge in wastewater treatment works, temporary sewage bypass pumping and emptying polluted excavations or tanks, these units are robust in design and capable of delivering months of continuous operation with no maintenance requirements. Hydroman has the proven experience and submersible pumps to provide reliable and efficient solutions for handling sludge,so we can offer a complete range of high-quality submersible sewage sludge pumps made for dewatering, moving mud, clay, sludge, light slurry, tank clean-outs, trench & pond cleaning, and mining applications.

Tobee® submersible sewage pump Specification: Capacity:8-4000m3/h Head:5-80m Power: 0.37-315 kw Speed:980-2900r/min Temperature range =80°c Materials:cast iron, ss 304, ss316, high chrome alloy

Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes.

Product Name Centrifugal submersible sewage pump Specifications Range of head: (m) Range of head: ~ m Range of quantity(m3/h) Range of quantity: ~m3/h Introduction A unique single- or double-channel impeller structure is adopted to greatly improve dirt carrying capacity and let go fibrous material equivalent to pump bore, and solid particles with a diameter about 50%of pump bore; the series is characterized by overall compact structure, small size, low noise, remarkable energy-saving effect, easy maintenance, greatly reduced project costs (since it can work in a submerged manner without pumping stations), quick installation; and resolved noise and heat problems.

INSTALLATIONS AND USE .For transporting clear water and the liquid which the physical and chemical property similar to water, and the temperature below 20ºC .For ground water supply to private houses,to waterworks and to irrigation systems .For water pressurization .For liquid transfer in tanks PERFORMANCE RANGE .Flow up to 100m³/h .Head up to 402m   OPERATION CONDITIONS .Liquid temperature up to +20ºC .Ambient temperature up to +20ºC .Continuous duty .Maximum sand content 0.25% .Minimum well diameter -4" for 4SP pumps -6" for 6SP pumps -8" for 8SP pumps -10'' for 10SP pumps    ELECTRIC MOTOR .Two-pole induction motor, 50HZ (n=2850rpm) .Single phase ,220-240V .With thermal protector incorporated into the winding .Available with the start control box or automatic control box .Three phase 380V/415V .Insulation Class F .Protection IP68 COMPONENT MATERIALS .External case Stainless steel AISI304 .Discharge head Stainless steel AISI304 .Diffuser Stainless steel AISI304 .Impeller Stainless steel AISI304 .Pump shaft Stainless steel AISI304 .Oil chamber Copper alloy   Main Features                                                                                                      1) Max head ranges from  20 m to 402 m . Max flow rate ranges from 2 m3/h to 100 m3/h with different size to be used in SP PUMP 2) 100% copper wire/ 304 stainless steel shaft  3) Advanced and smart controller 4) 100% testing system for motor/complete set pump/controller, each pump will be tested good before delivery. 5)Installation is simple and convenient, free maintenance 6)Overload protector.When the temperature of the motor is too high, more than the temperature of the Overload protector to protect the water pump will automatically jump out, prevent burning machine.   Pump Checking                                                                                                  EACH PUMP WILL BE TESTED GOOD BEFORE PUMP DELIVERY. Product Application Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Skysea people practice the spirit of craftsmen, pursue excellence, and insist on continuous innovation and improvement. The company from raw materials into the factory, parts processing to pump assembly testing out of the factory, all use advanced testing instruments, perfect technical means, standardized operation process, to ensure that each part, each product meets the technical requirements, thus ensuring the stable performance and reliable operation of the product.

Product Description This series of pump is widely used in fields of sewage treatment in municipal waste water treatment project, mine industry, hospital, hotel and building industry, and also can be used in raw water transportation, water flood control, farm irrigation and chemical industry medium promotion.

Wq series submersible sewage pump

Product characteristics 1, the use of a unique single or double impeller structure, greatly improve the ability of dirt through the pump diameter of 5 times the fiber material and the diameter of the pump diameter of about 50% of the solid particles. 2, the mechanical seal uses a new type of hard corrosion-resistant tungsten titanium material, which can make the pump run safely and continuously for more than 8000 hours. 3, the overall structure is compact, small volume, low noise, significant energy saving effect, easy maintenance, no need to build pump room, diving into the water can work, greatly reducing the project cost. 4. The pump seal oil chamber is equipped with a high-precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat-sensitive element to automatically protect the pump motor. 5, can be equipped with automatic control cabinet according to user needs, the pump water leakage, leakage, overload and overtemperature automatic protection, improve the safety and reliability of the product. 6. The float switch can automatically control the start and stop of the pump according to the required level change, without special care, and it is very convenient to use. 7, WQ type submersible sewage pump can be equipped with double rail automatic coupling installation system according to user needs, it brings more convenience to installation and maintenance, people can not enter the sewage pit for this. 8, can be used in the full head, and ensure that the motor will not overload. 9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation. Main use WQ type submersible sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement factory, steel mill, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction site and other industries conveyor belt sewage, dirt, can also be used for pumping clean water and corrosive media.

Overview It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment. The design,manufacturing and quality of this series of products comply with GB/T24674â??Waste submersible motor-pumpsâ??standards,CJ/T472â??Submersible sewage pumpâ??standards,and its efficiency index reaches GB32031â??Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumpsâ??standards. Application This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries Working condition Outlet diameter:DN100mm-DN900mm Rated voltage:380V or 660Vã??3KVã??6KVã??10KV,etc Frequency:50Hz three-phase AC power Medium temperature: â?¤42â??,densityâ?¤1200kg/m3 pH value:within the range of 4-10 Volume ratio of solid phaseâ?¤5% Maximum flow capacity:the diameter of the solid in the medium should not be greater than 80% of the minimum size of the impeller passage Corrosive medium requirements:The products can not be used fro pumping media that are highly corrosive or contain strong abrasive solid particles.