QUICK 715 2 in 1 Double-station Intelligent Soldering Station for Phone Motherboard Welding Repair.
Features :
Adopt the latest design concept of QUICK
Quick 2008 air gun and 936A soldering iron combined
Large screen LCD display, thin and light, low power consumption, adjustable brightness
Independent control of temperature and air volume
Encoder adjustment, more intelligent
Digital temperature air volume calibration, more intuitive and convenient
Fast heating hot air gun, quality heat rises rapidly.
Vortex fan built into the handle, efficient heat collection, balanced airflow, long life.
Air gun noise reduction design, the wind is soft and even, low noise, no damage to components.
Fast heating iron, efficient heating, good tinning effect, long life.
Increase transformer, full power select circuit board anti-aging heat dissipation.
High temperature resistant flame retardant environmental protection material, artificial design
Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature
Small size and strong performance,Multi-purpose
Small temperature difference (plus or minus 5 degrees)
Menu :
Backlight on off
Temperature calibration of air gun soldering iron
Encoder on off
Parameter :
Product Name: 2 in 1 Soldering Station
Model: QUICK 715
Power: 760W
Voltage: 110V 220V 50Hz
Soldering Station Temperature: 100 480
QUICK 857DW+ lead free adjustable heat gun/hot air gun with helical wind soldering rework station, QUICK 857DW+ is an upgrade version of QUICK 857D SMD ESD soldering station, high efficiency heat dissipation to the heater soldering tip. Professional mobile cell phone repair tools: cheaper soldering iron and soldering station for proper mobile phone repairing.
QUICK 857DW+ Lead Free Rework Station SMD ESD Soldering Station (upgrade verson of 857DW)
Technical parameters :
Power Consumption: 580W
Air pump: DC motor, double turbine rotate out of the wind
Temperature control: 100 to 450 degrees
Gas flow rate: 100 litres/minute
Component length: 110cm
Size: 17 x 10.5 x 24 cm
Product Features :
Linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
Express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color.
BGA chip is not easy to break.
Product Usage :
Suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
Used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.
Package List :
1pcs x Heat gun Quick 857DW
2pcs x Tweezers
Quick TR1300A hot air soldering station is an professional intelligent soldering rework station for mobile phone motherboard repair, 1300W Quick TR1300A intelligent hot air soldering station with touch control temperature alarm password lock function multipoint temperature digital calibration for phone PCB soldering repair.
QUICK TR1300A Intelligent Hot Air Station Mobile Phone Soldering Repair. Come with 3pcs: Heat Gun Nozzles 5mm 6mm 8mm, if need 3mm 12mm Nozzle, need bought it alone. More QUICK 861DW TR1300A Nozzles from: VC979.
General Specification:
Power: 1300W
Voltage: 110V 220V for choose
Temperature range: 100 C~500 C 212 F-932 F
Temperature stability: 2 C
Air volume: 6 70L / Min
Airflow: 1 100m3/h
Description :
Host and duct design separately
Ultra-high power 1300W
You can preset the process parameters of the three channels
With temperature alarm function
The use of brushless vortex fan, air flow adjustable, a large range
Can be on the temperature, air volume, time and other parameters set
Mulit-point temperature digital calibration, temperature locked by password.
Parameters of three channels pre-set memory.
Temperature alarm function, C and F interchangeable.
Twin-stag brishless blower pump for stable airflow, long life.
Temperature, airflow, working time and other parameters can be set.
Slient design of the rework station, with noise lower than 55dB.
Plug-in design of ceramic heating element for stable temperature, long life and easy maintenance.
ESD design, ESD testing function.
Can be controlled via PC
QUICK TR1300A 1300W Intelligent Hot Air Soldering Station
Features :
Multipoint temperature digital calibration,Password lock function.
Can preset technological parameter of three gallery, more practical.
Temperature alarm function, temperature changer.
Adopt two-stage supercharging brushless pump, air pressure stability, long life.
Set the parameters such as temperature, air velocity and time.
Ceramic heating element, plug type design.
De-soldering of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Suitable to hot shrink, drying, remove lacquer and viscosity, thaw, preheating, disinfect and so on.
Suitable to the situation with different grade airflow.
Suitable to the hot air lead free de-soldering.
Original QUICK 706W+ 2 in 1 hot air gun soldering iron rework station, QUICK 706W+ digital display SMD rework welding station. QUICK 706W+ ESD Safe lead free phone rework station for BGA soldering repair. QUICK 706W+ Hot Air Soldering Rework Station (2 in 1).
Specifications:
Hot Air Station Power Consumption: 580W
Soldering Iron Power Consumption: 50W 24V/AC
Voltage: 220V/110V
Soldering Iron Output Temperature: 100�°c - 480�°c
Display:LED Digital Display
Air Out Way: Straight wind
Features:
1. 2 in 1 rework station, bga hot air rework station+soldering iron
2. Stepless airflow adjusting with a wide range. Temperature can be conveniently adjusted.
3. LED accurate digital display, single control.
4. Small Size. Save working space.
5. Ceramic skeleton heating core,increase stability and not easy to burn short circuits.
6. Straight wind, high speed,low noise and strong wind
7. The handle is equipped with a sensor device, which is placed on the handle frame.
8. The system will automatically cool down and enter the standby state.
AT8586 2 in 1 hot air gun soldering station with digital LED temperature display for mobile phone motherboard repair, professional SMD soldering iron station for mobile phone BGA PCB welding repair tool, AT8586 2 in 1 hot air SMD soldering rework station, soldering rework station for cell phone repairing tool, operation more convenient and accurate.
AT8586 SMD Soldering Station Hot Air Gun Rework Station for Mobile Phone Repair
Description :
Hot air station and soldering station set(the two of them can work separately without mutural interference).
Digital LED temperature display, so that the operation more convenient and accurate.
Self-examine and error check, with screen remindings to guide people to repair.
Adopts Closed-loop control sensors for temperature accuracy and stability.
Ideal for safe demolition solder QFP, PLCC, SOP, BGA and other chips and components which are temperature-sensitive.
Intelligent cooling system, after the shutdown delay completion of the work of air, air temperature lower than 100 automatically cut off power supply.
Use of imported air pump for low vibration, noise-free design and maintain a quiet working environment.
Static elimination design, prevent PCB board damage due to static or electric leakage.
Rework Station Information :
Input Voltage: AC220V+ 10% 50Hz
Power Consumption: 750W (max)
Display: LED Display
Work Temperature:
Humidity: 80%
Storage Temperature
Product Specification :
Power consumption: 700W
Temperature Range: 100 C~500 C
Temperature Stability: C
Air Flow: 120L/min (max)
Noise:
898 Quick 715 Rework And Soldering Station Suppliers
Short on time? Let Quick 715 Rework And Soldering Station sellers contact you.
SUGON T16 Precision Soldering Rework Station For Phone PCB Repair Tool.
Features:
1: 2 seconds temporary warming, humanized design, convenient for the use of maintenance personnel.
2: Innovative design, high quality guarantee.
3: Precision iron head, can be used with JBC 210 handle.
Constant temperature QUICK 936 60W soldering station, QUICK 936 electronic soldering iron for mobile phone repair, the iPhone 7 7 plus fingerprint repair soldering station. 60W QUICK 936 for SMD soldering station with adjusted temperature setting. QUICK 936 BGA rework station is specialized in phone repair
Features:
1. Temperature range:392�°-896�°F (200�°C- 480�°C)
2. Adjustable temperature control
3. Imported ceramic heating No 1321 element and senor insures rapid heat-up temperature and lightning-fast thermal recovery
4. Celsius or Fahrenheit temperature setting
5. Temperature adjusted by simply turning the dial
6. Slender iron handles are insulated and ergonomic-designed for ease and comfort
7. Wide selection of tips available for soldering SMD and through-hole connections
Parameters:
Powe supply: 220V-240V (50Hz-60HZ)
Power consumption: 60W
Temp. control range: 200-480C
Voltage output: AC 24V
Ground resistance: 2ohm
Size: 120*90*170mm
Quick Details
Pressure : High
Place of Origin : Hubei, China
Model Number : 20Mpa-356(7.7)mm-150L CNG Compressed Natural Gas
Material : Steel, 34CrMo4 Steel
Brand Name : SINOGES or OEM Branded
Use : Vehicle Mother Station Transport
Application : Vehicle Mother Station Transport
Working pressure : 20 MPa | 200 Bar | 2901 psi
Test Pressure : 37.5 MPa | 375 Bar | 5439 psi
Outer Diameter : 356 mm | 14 inch
Wall Thickness : 7.7 mm | 0.3 inch
Water capacity : 150 L | 9154 in3
Cylinder Height : 1851 mm | 72.9 inch
Cylinder Weight : 141.1 kg | 311 lb
Certification : ISO 9809-1 TPED
Supply Ability
Supply Ability : 2646 Piece/Pieces per Week
Packaging & Delivery
Packaging Details : Wood Pallet Packing
Port : Shanghai
Picture Example : package-imgpackage-img
Lead Time:
Quantity(Pieces) 1 - 1 2 - 378 379 - 1134 >1134
Est. Time(days) 15 35 45 To be negotiated
QUICK TS1200A is the intelligent lead free Lcd touch soldering station. 120W TS1200A anti-static soldering iron soldering station for cell phone circuit board repairing. Touch operation, intelligent, lead free, digital led display, 120W intelligent soldering station for mobile phone BGA desoldering repairing.
Features:
Touch operation, intelligent, lead free, digital led display
Temperature Stability: Adjustable
Tip to Ground Potential:
QUICK 203 soldering station is especially suitable for manual placement of SMD components, repair and welding of the ordinary in-line components, especially higher level of lead-free products, higher quality welding work.
Quick 203 digital temperature soldering station Lead
Product Features :
Designed for lead-free soldering design
Astonishing rate of temperature increase, the mixture was increased from room temperature to 300 �° C never exceeds 20 seconds.
Intelligent perfect welding, plenty of power and change, depending on the size of solder joints, then solder joints be able to complete a perfect welding, can effectively prevent cold welding caused not firmly connected.
Extraordinary heat recovery skills, the magic temperature compensation speed can solve the contradictions of temperature lead-free soldering process, lead-free soldering tool, an indispensable tool for certain low temperature conditions welding.
Extend tip life, welding relatively lower temperature greatly extend the life of the tip.
Performance Parameters :
Temperature adjustment range: 50C -600C
Temperature stability (no load): ± 2C
Input voltage, frequency: 220V/110V 50Hz/60Hz
Output voltage, frequency: 36VAC 400KHz
Maximum power: 60W
Heating time: (20C -350C)
The temperature dropped from: 30C
Tip-to-ground resistance:
SUGON T1602 Soldering Station T12 Double Welding Handles Phone Repair BGA SMD Solder Tool. Sugon T1602 2-in-1 lead-free T12 soldering iron BGA rework station station, dual channels can be worked at the same time, and it can be heated up in 1 second.
Features:
1. 2 in 1 soldering iron tool, master lever, independent double station.
2. Independent control of A/B zone, two independent soldering iron handle plug settings.
3. Two soldering iron tips can be used separately at the same time for different maintenance operations.
4. Use T12 series soldering iron tips, and can realize instantaneous temperature rise, which can be used when picked up.
5. Software control, hand up and go to sleep mode immediately.
6. Four sleep standby temperatures can be selected for each dual channel.
7. Two sets of preset memory temperature for each dual channel.
8. C/F conversion, temperature calibration, temperature locking, buzzer switch.
9. Overload protection, the short-circuited heat core will not burn the host.
10. The soldering iron has a breathing lamp to follow the power used to display the working status.
11. No influence, no interference, more convenient.
12. Applicable Industries: Machinery Repair Shops, Manufacturing Plant, Retail, Phone Repair Stores, Repair Training Schools.
13. Useful: This soldering station can be used to connect bga, smd, smd and other electronic products. it is very suitable for use in homes, offices, schools, etc.
Parameters:
Input Voltage: AC110V/220V 50/60H.
Power: 120W(max).
Temperature range: 100â??-450â??.
Display: LCD digital display.
WDS-700 BGA Rework Station are widely used to replace and repair the BGA chip in laptop, mobile phone, The main user is repairing shops and factory to provide the after-sales service and rework.
How to separate BGA chip from motherboard / How to replace a new BGA chip
Repair steps
1.Separate the BGA chip from mother board -we called desoldering
2.Clean Pad
3.Reballing or replace a new BGA chip directly
4.lignment/Positioning -Depend on experience ,silk frame ,optical camera
5.replace a new BGA chip - we called Soldering
SUGON T28 Nano Soldering Station with JBC C115 C210 Soldering iron tips for motherboard BGA IC welding repair. 120W Sugon T28 welding station with C210 C115 double handles, and use original JBC soldering iron tip. SUGON T28 soldering rework station micro-soldering tool.
Features:
- 120W output power, heats up rapidly in 2 seconds.
- Equipped with C210 and C115 two handles, which can be used alternately.
- Precision and durable soldering iron tips, can use original JBC soldering iron tip.
- Software program control, instant hang up.
- Temperature memory presetting channels, C/F conversion, temperature calibration, temperature lockout, buzzer switch, convenient for the use of maintenance personnel.
- Equipped with heating core / host protection.
SUGON T3602 2 In 1 soldering station with JBC 115 210 soldering iron tips and double soldering handles, SUGON T3602 SMD lead free soldering rework station mobile phone welding tool for phone PCB motherboard IC BGA soldering repair. High quality digital display soldering station SUGON T3602 microsoldeirng tool.
Note: Since the original packaging size is larger than the net weight, in order to save your shipping cost, we will remove the original packaging to reduce the volume weight. The original packaging is removed by default, if you need the original packaging, please contact us in advance to pay the freight difference.
Features:
1.SUGON T3602 2in1 Soldering Station
2. LCD digital display
3. Accurate temperature control
4. 1S Rapid Heating
5. Independent control of A/B zone
6. Lead-free Soldering Station
7. 2 in 1 soldering iron tip,master Level
8. Two independent soldering iron handle plug settings
9. No influence, no interference, more convenient;
10. Two soldering iron tips can be used separately at the same time for different maintenance operations
Atten ST-2090D 80W Thermostatic Digital Rapid Heating Welding Rework Station Soldering Iron Kit with Soldering Wire Holder, ATTEN ST-2090D Multi-function Digital Thermostatic 80W Lead-free Original Soldering Station for Cellphone BGA SMD PCB IC Repair.
Features:
Max Power of 80 W, soldering iron 28 V AC
Temperature read out in MCU controlled temperature calibration.
Soldering station with solder wire stand.
Auto-standby, Auto-shutdown function are available.
Heating wire and sensor use PTC materials.
Soldering tip designed separate from heater and using common T900 series to save use-cost.
Very fast heating: from room temperature to 350 C only approx. 15 s
Soldering iron with flexible connection cable
Adjustable temperature range 80 - 480 C
Specification:
Model: ST-2090D
Power consumption: 80W
Input voltage: AC 220V
Output voltage: AC 24V
Display method: LED
Temperature range: 80~480 (176 896)
Temperature offset range: 50 (90)
Temperature stability: 2 at idle temperature
Tip to ground resistance:
Quick 861X 1300W Soldering Rework Station Quick Hot air gun Flagship Edition Hardcover Edition,Quick 861X Intelligent Digital Display 1300W High Power Heat Gun Rework Hot Air Gun Desoldering Station Soldering Station.
Features:
With CH1, CH2, CH3 three working channels, and each channel can be set to the amount of wind, and temperature.
Password protection and key lock function.
Facilitate real-time operation, with magnetic switch control lever is placed in the handle holder immediately into hibernation.
With automatic sleep function, in a dormant state parameters can be set.
Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly, easily and precisely adjust the temperature stable, free from the influence of wind.
The use of brushless vortex blower, air flow adjustable, wide range, can be adapted to a variety of uses.
The system has an automatic cooling function of wind capacity, extend the life of the heating element and protect the hot air handle.
ADB black, leading, the trend, 1300W high power, air volume 2-200 level.
Real-time operation is convenient with magnetic control switch control, put the handle on the handle stand and sleep immediately.
3 standard air nozzles with different specifications.
Temperature-locked channel, according to different job requirements, three different working modes can be set.
Real-time operation is convenient with magnetic control switch control, convenient temperature adjustment.
Upgraded QUICK 858D+ 750W hot air rework station for SMD motherboard BGA IC soldering repair. Original QUICK 58D+ LCD digital display hot air gun ESD desoldering rework station for mobile phone BGA IC components desoldering and welding repair.
Feature:
1. Closed loop of sensor,temperature can be controlled by zero voltage triggering mode and will not be affected by air volume.large power ,rapid heating,LED display,temperature accuture and stability.
2. Airflow is adjustable,mild wind.temperature can be easily and conveniently adjusted.
3. Induction -switch ensures starting working immediately after the handle is held.When handle is put on the holder,the system will return back to standby mode.Easy to use.
4. With the automatic cooling function,it can prolong the life of the heating element and protect the unit.
5. The crust is made of alloy material.The unit is compact,durable and it takes up little space on the workbench.
6. Adopt a brushless fan,and noise is very low.
Specification:
1. QUICK 858D+
Display Type: LCD
Power: 750W
Operating Voltage: 110V/220V
Temperature: 100�°â??-500â?? Range
Air Volume: 1-100 Level Range
Air Volume: 30L/min(Max)
Product Size: 170*150*98mm
Package Size: 330*180*230mm
Net Weight: About 1.5kg
Gross Weight: About 1.9kg
QUICK 881D power intelligent lead-free hot air gun rework station 1300W 200l / min, Quick 881D BGA soldering rework station, professional mobile phone circuit board BGA desoldering tool, 2-IN-1 upgrade version from Quick 856AD hardcover edition + Quick 861DW flagship edition, make your maintenance work more efficient.
Upgraded QUICK 2008D+ lead-free desoldering station 750W hot air gun for Mobile Phone LCD display motherboard BGA IC soldering repair. QUICK 2008 rework station 700W hot air gun for Mobile Phone LCD motherboard BGA IC soldering repair. Original QUICK 2008/QUICK 2008D+ LCD digital display hot air gun ESD soldering rework station for mobile phone BGA IC components desoldering and soldering repair.
Option:
1. QUICK 2008.
2. QUICK 2008D+.
Note: 110V, need Customized, time: about 3-5 days.
Specification:
1. QUICK 2008
Display Type: LCD
Power: 700W
Voltage: AC 110V/220V
Temperature Range: 100 500
Air volume ratio range: 1 ~ 120
Maximum airflow: 120 L / min
Airflow type: brushless fan soft wind
Display: LED digital (resolution 1 C)
Product Name BEST-850 SMD Rework Station
Order No NO.A013
Product Class BEST production series
Closed loop sensor temperature control.Maintains a constant set temperature when the set temperature is reached.Electrostatic discharge safe design with grounding measure.
Specifications
Power
Input Power Consumption Temperature Range weight Pump
/.Motor Type Air Capacity Station Dimensions
(mm) Heating Element
Available in
110V/
220V 500W 100-550 3.7kg Diaphragm Pump 23L/min(max) 188W*
127H*
244D Metal Heating Core
898 Quick 715 Rework And Soldering Station Suppliers
Short on time? Let Quick 715 Rework And Soldering Station sellers contact you.
