A quick drying gloss paint designed for use in steel scaffolding. The product is formulated with co-polymer alkyd & heat resistant pigments. It can be applied by conventional/electrostatic spray, dipping & by brush over a small area. The product is available in silk matt finish also.
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Quick Dry Paint Enamel & Thermoplastic Paint QD Enamel Ritver Stoving Topcoat Paint
Product Description Nolifrit Ground Coat Porcelain Enamel Frit Features: 1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body. 2, Can be combined with cover coat in high level. 3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress. 4, With less viscosity and surface tension, its good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products. 5, With suitable expansion coefficient similar as steel plate. ABOUT US vitreous enamel coating porcelain enamel steel grates enamel glaze fritHunan Noli Enamel Co., Ltd is the leader manufacturer of enamel frits & inorganic pigment in China. Now we have 30,000 M/T enamel frits and 2,000 M/T inorganic pigments annual capacity, 10,000 M/T RTU(Ready to use) powder and electro static powder. Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including Red& yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating,painting etc. As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer. 100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa. FAQ Q1. Are you factory or trading company ? We are a factory. Q2. Whats the MOQ ? Inorganic pigment MOQ is 25kg, enamel frit, RTU powder and electronic static powder MOQ=200kg. Q3. What is your principle for the samples ? We offer free samples if you are willing to pay the shipping cost. Q5. How about your delivery time? A: Generally, it will take 15 days after receiving your advance payment. Q6. What information should I let you know if I want to get a quotation? A: Your base material, your application area (best to send your finished product picture), the physical parameters you require(acid resistance, adherence, color, etc) the quantity you need. If possible, you can send me your samples and we customize for you. Q7.Why choose us? 1. Reaching a production capacity of 30,000 Tons/Year for Enamel frit, 10,000 Tons/Year for RTU & electronic static powder, 2,000 Tons/Year for Inorganic pigment. 2. 60% frits & pigment exported to US, Netherlands, Indonesia,Thiland, Vietanam, Korea, Chile etc 30 country. 3. Having over 30 technical experts of frits & pigment from domestic & overseas, focusing on technical development & product improvement. 4. Having complete quality control system, Strong technical supporting team is focusing on customer service in this world.
Commodity: Sodium Sulphate anhydrous Product Nature Molecular formula: Na2SO4 Molecular weight: 142.04 Property: white granular crystal or powder Use As filler of detergent, the making of sodium sulphide, water glass, or used in papermaking, glass, dye and used as filler, dyeing auxiliary, laxative, antidote, t also can be used in fiber, leather, metallurgy, enamel and soap. Specifications Item GB6009-2003 Type First grade Result of common product Result of neutral product Na2SO4 99.0 99.20 99 40 Water insoluble matter %0.05 0.02 03 Ca & Mg %(Mg) 0.15 0.02 02 Chloride %(Cl) 0.35 0.23 20 (Fe) 0.002 0.0001 0001 Moisture % 0.20 0.02 02 Whiteness % 82 88 85 Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
NEO ENAMEL Paints are based on the alkyds/drying oils which have hard films with gloss retention. The films show excellent brushing properties and very little tendency to yellowing on exposure to the environment. Products are carefully designed keeping the pigment volume concentration to get optimum gloss, washability, adhesion and durability. The product dries at room temperature by oxidation and polymerization. NeoSyntheic Enamels are used on various substrates like wood , metal furnitures, train coaches, automobiles industries etc. NEO ENAMEL products are available in 2 varieties : I GLOW Hi Gloss Enamel. X 2 General Purpose Enamel.
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit
Potash Feldspar: We have come up as a dependable firm bringing forth Potash Feldspar all over the world. Based in India, we are exporting Potash Feldspar in varied quantity packs. Potash Feldspar are processed and are used for varied industrial applications. Further, we keeping in mind the budget constraints in mind, we offer Potash Feldspar at the market leading prices. About Feldspar: Feldspar is non-plastic Potassium or Sodium Alumino silicate mineral represented as KAlSi38or NaAlSi38. Feldspar is used generally for the following purposes : Ceramic Manufacturing formulations : In making the body composition of several types of ceramics and in preparation of glazes and enamel, Glass Manufacturing and Abrasive Manufacturing. It is used along with Ball Clay, Kaolin and quartz for tiles and sanitary Wares manufacturing. The presence of iron even in small quantity tends to impart coloration.
Specification: Screen Size: 50Inch Interface Type: Composite A/V, DisplayPort, LAN, Separate Video, Toslink, usb, VGA, Component Video, Digital Audio, support HDMI input Resolution: 2K 4K Receiving System: NTSC, PAL, SECAM Brand Name: OEM Display Format: FHD UHD Backlight Type: LED OSD Language: Multi-language OSD Optional Keyword: 2K 4K LED TV Interface: DC 12v Warranty: 12 Months
Since 2010 we are engaged in trading & exports of ceramic products, very high Quality of Zirconium Silicates & Zirconium Flours for ceramics. We mostly supply Zirconium 2, Zirconium 5 and Zirconium Flour 325 mesh to ceramic industries. Application Of Zirconium Silicates : Opacifier for pottery and porcelain glazes ,wall tiles, roofing tiles, sanitary ware etc Frits, Glazes & Enamels. Admixture for ceramic body. (Improvement of property and Opacification of color) Typical Chemical Properties Composition - Zirconium Silicate (ZrSiO4) Zirconia + Hafnia (ZrO2 + HfO2) : 65.00% Min. Silica (SiO2) : 35.00% Max. Alumina (Al2O3) : 00.70% Max. Titania (TiO2) : 00.20% Max. Ferric Oxide ( Fe2O3) : 00.10% Max.
E-NOVEMXIM VIETNAM Dear customers! Our company cooperates with manufacturers and is a commercial representative for large enterprises producing quality and reputable food spices in Vietnam market. Our company provides wholesale and retail of aperitif products such as: salted roasted silk shells, salted fried peanuts, crispy dried soy beans, salted peas ... hotel ... in country and export. Information of roasted salted silk shells: - Ingredients: Cashew nuts, salt, ... - Key quality indicators: - Microbiological criteria: According to Decision 46/2007 / QD-BYT
E-NOVEMXIM VIETNAM Dear customers! Our company cooperates with manufacturers and is a commercial representative for large enterprises producing quality and reputable food spices in Vietnam market. Our company provides wholesale and retail of aperitif products such as: salted roasted silk shells, salted fried peanuts, crispy dried soy beans, salted peas ... hotel ... in country and export. Information of roasted salted silk shells: - Ingredients: Cashew nuts, salt, ... - Key quality indicators: - Microbiological criteria: According to Decision 46/2007 / QD-BYT
E-Novemxim Vietnam Dear customers! Our company cooperates with manufacturers and is a commercial representative for large enterprises producing quality and reputable food spices in Vietnam market. Our company provides wholesale and retail of aperitif products such as: salted roasted silk shells, salted fried peanuts, crispy dried soy beans, salted peas ... hotel ... in country and export. Information of roasted salted silk shells: - Ingredients: Cashew nuts, salt, ... - Key quality indicators: - Microbiological criteria: According to Decision 46/2007 / QD-BYT
Pigments are essentially coloured powders or Liquid, and are used to produce a full range of colours. We can say pigments are a primary material, to produce all types of paints and colouring material, Enamels, acrylics, pastels, chalks, Coloured pencils, oils textile prints , Inks, Rubbers, Plastics etc.
Dinnerware Type: Bowls Technique: Color Enamel Quantity: >10 Certification: CE / EU, CIQ, Eec, LFGB, Sgs Feature: Sustainable Place of Origin: Vietna
CAS No: 1314-62-1 UN No.: 2862 Application Catalysts for sulphuric acid, maleic anhydride, adipic acid. Colouring and glaze for ceramic industry. Enameling frits for porcelain or aluminum coating. Pigment and absorption of ultraviolet light or infrared light for glass industry. DeNOx FCC additives for Petroleum Processing. Corrosion inhibition in carbon dioxide scrubbers for gas sweetening of types Benfield, Ventrocoke. Grain refining in tungsten carbides. Manufacturing vanadium aluminum. Additive for Li rechargeable batteries or light emitting substances for display screens. Magnetic material.
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20