Low protein-binding for filtration of non-aggressive aqueous and mild organic solutions. Low UV absorbing extractables and low nonspecific protein binding. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm,25mm and 30mm.
For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
Filtration of water-soluble oligomers and polymers,e.g. protein solutions Filtration of hydrophobic substances in different organic solvents Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22 m and 0.45 m. Three types in filter size:13mm, 25mm and 30mm. Note: Nylon binds protein, do not use when high protein recovery is desired.
Various membranes are available to meet your needs: Polyethersulfone (PES) - low protein binding and faster flow rate. Polytetrafluorethylene (PTFE) - chemical resistance. Nylon (NY) - hydrophilic and lowest extractable. Accurate labeling with specific filter material and pore size for easy identification. Sterilized, manufactured in accordance with ISO standards.
Various membranes are available to meet your needs: Polyethersulfone (PES) - low protein binding and faster flow rate. Polytetrafluorethylene (PTFE) - chemical resistance. Nylon (NY) - hydrophilic and lowest extractable. Accurate labeling with specific filter material and pore size for easy identification. Sterilized, manufactured in accordance with ISO standards.
Materials: carbon steel and stainless steel (302,304,304L,316,316L etc). Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering. Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters. Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone . We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
High flow rates(liquids), low protein binding, low concentrations of extractable substances. Low-affinity for proteins and extractable with substantially faster flow rates than PVDF; suitable for pre-filtration and filtration of buffers and culture media. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
ES fiber is produced by composite spinning technology with sheath-core structure, sheath is PE, and core is PET or PP. During heat processing, sheath components are melted and adhered to stick fiber together, but core will be there to keep good resilience and shaping. It's used for nonwoven fabric, applied to medical (facial mask), hygiene products (baby diaper, women sanitary napkins, filter industry, etc. Functional ES Fibers:� -- Hydrophilic -- Durable Hydrophilic -- Hydrophobic -- Anti-bacterial -- Dope Dyed Colors
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
Syringe filter Filter media 3.5 bar 5.2 bar Dimension 16.0mm*23mm 23mm*23.5mm 28.0mm*24.3mm 40.0mm*30.3mm Hold-up volume £¼100 ¦ìl £¼150 ¦ìl £¼250 ¦ìl £¼350 ¦ìl Inlet Female Luer lock Female Luer lock Female Luer lock Male Luer unlock Female Luer lock Female Luer lock Outlet Male Luer unlock Male Luer lock Male Luer lock Male Luer unlock Male Luer unlock Male Luer unlock Flow direction Flow should enter from the inlet Maximum operating temperature 131¡æ Please contact us for more details. 100pcs/bag
Syringe filter material:PTFE/NY/CA/PES/MCE/PVDF/RC/GF parameters:13mm,0.22um/13mm,0.45um/17mm,0.22um/17mm,0.45um/25mm,0.22um/22mm,0.45um/30mm,0.22um/30mm,0.45um Hydrophobic/Hydrophilic
Main features: High flow rate with low pressure drops; High particle removal efficiency; Easy installation, replacement and maintenance; Long service life. Specifications & technical data Material membrane: pvdf Core: polypropylene/sus304l O ring/gasket: silicone/viton/tev/epdm Specifications: pore size (um): 0.20, 0.45, 0.80, 1.00, 3.00 Outer diameter(od): 68mm / 70 mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: doe, soe (code2, code3, code7, code8) Technical data: effective filtration area (10"): y0.6 m2 Normal working temperature: Max. Working temperature: 90 Max. Differential pressure: 4.2 bar Ph value: 1-13 Sterilization method: autoclaving within 30 minutes Water flow rate with different pressure see the chart Test: 100% integrity test :25 y95% ethanol 0.2um¡y0.70 bar; 0.45um¡y0. 50bar Applications: (mainly for winery, chemical and electronical inudstry ) Bacteria removal for winery industry; Gas filtration for electronic industry, biological engineering, precision mechanical industry; air filtration in aseptic packing industry; ozone filtration for mineral water and purified water; bacteria removal filtration for all kinds of organic solvent. Complete test (minimum bubble point ) 0.2um >=0.07mpa 0.45um>=0.04mpa
Product Characteristics: Superior corrosion resistance, applies to filtration for the solution of solvent and acid etc. Superior temperature tolerance and anti-pollution Two types, hydrophobic and modified-hydrophobic Product Applications: Effective filtration of organic solvent and additive Ultimate filtration of ink Filtration of solvent and chemical materials Aspetic treatment for reagent Filtration of high-temperature liquid Dust-filtration of air and gas Aseptic filtration of gas and vapor Sterilization Methods: Non-sterilization packaging; sterilization under high temperature and pressure Pore size (um): 0.22, 0.45, 1.0 Configuration size (um)
Syringe-driven filter units are available in 0.22, 0.45 and 0.8 micron pore sizes with pvc housings. Membranes available include mf-millipore (mixed cellulose esters), nylon, durapore (pvdf) or polytetrafluoroethylene (ptfe). The 13 mm units are recommended for filtering volumes from 1 to 10 ml. The 25 mm units are recommended for filtering volumes from 10 to 100 ml. 100/pk
Membrane: HPLC Certified PVDF Housing: medical grade, virgin polypropylene Prefilter: binder-free glass microfiber prefilter Connections: enhanced female Luer-Lok inlet, male Luer slip outlet Max. operating temperature: 110C Max. operating pressure: 110psi (13mm), 110psi (25mm) Retention volumes: 4mm - 20l(13mm),
The Syringe Filters are a fast, convenient and reliable filter tool used in the laboratory. It is beautiful and light in appearance and high cleanliness. It is mainly used for sample prefiltration and clarification of removing bacteria and filtration of particles, liquids, and gases. It is the first choice for filtering HPLC and GC small quantities. Hawach produces three series of syringe filters: WINSTAR series syringe filters, FILTSTAR series syringe filters, Sterile series syringe filters.
1 Syringe Filter has as follows kinds: Hydrophobic PTFE syringe filter,Hydrophilic PTFE syringe filter,Nylon syringe filter,PES syringe filter,Hydrophobic PVDF syringe filter,Glass Fiber syringe filter 2 There are many kinds of material Disposable filter: 1 PP Disposable filter 2 PES Disposable filter 3 Nylon Disposable filter 4 PTFE Disposable filter 5 PVDF Disposable filter.
Overview Quick Details Classification: Other, Other Brand Name: Aijiren Model Number: FE series Place of Origin: Zhejiang, China (Mainland) Material: PTFE Diameter: 13mm,25mm Filter Hole: 0.22um,0.45um,0.8um Color: white Samples: Free MOQ: 1 pack Leading Time: Within 10 workdays after payment Payment: 100% T/T in advance Certificates: ISO9001:2015, BVQI Supply Ability Supply Ability: 100000 Piece/Pieces per Day Packaging & Delivery Packaging Details 100pcs/pack+shrink wrap+export cartons Port Shanghai or Ningbo
