Features: It is small, light and easy to carry Accurately measures spo2 value and pulse rate Lcd display of spo2, pulse rate and pulse intensity by bar-graph Automatic power-off if finger off longer than 8 seconds More than 50 hours continuous working time with 2aaa alkaline batteries Low battery voltage indication Features: It is small, light and easy to carry Accurately measures spo2 value and pulse rate Lcd display of spo2, pulse rate and pulse intensity by bar-graph Automatic power-off if finger off longer than 8 seconds More than 50 hours continuous working time with 2aaa alkaline batteries Low battery voltage indication
Screen Display:1.1" full color OLED Multi-directional display:4 directions Pulse Rate (PR) Perfusion Index (PI) Pulse Bar Display Plethysmogram Display Automatic Start Automatic Power-off Alarm Power Supply:2*AAA alkaline battery Continuous Working Time:Approx. 30 hours (depending on battery quality).
Integrated with SPO2 probe and processing display module Can be used in: hospital, home, community medical treatment, sports healthcare, etc. Can measure SPO2 and PR accurately SPO2 and PR display, bargraph display Battery voltage low indication Low power consumption; shut off automatically when no signal Small volume(57(L) ¡Á 33(W) ¡Á32(H) mm)light,convenient to carry.
1.Clean surface of the fingertip oximeter before it is used in diagnosis for patients 2.Remove the batteries inside the battery cassette if the oximeter will not be operated for a long time 3.It is best to preserve the product in a place whtere ambient temperatures 10~40¡æ(14~104¡ãf£©and humidity is 10%~80% 4.It is best to storage the product in a place where ambient temperatures -20~70¡æ and humidity is
Specifications This Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for use in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising) Function Display of Sp02 value Display of pulse rate value and bar graph Display of Pl value (optional) Display of pulse waveform Battery power indication (optional) Low-voltage indication: the low power indication symbol appears when the voltage is too low to work Auto Power On Auto standby The display mode can be changed (optional) Adjustable screen brightness (optional) PR sound prompt (optional) Sound prompt (optional) Automatic direction-changing function (optional) Product Name - Portable Smart Finger Pulse Oximeter Model - CMS50-PRO Shell Color - Green Material - Plastic
1).Compact and beautifully designed,easy to carry. 2).Can dispay the waveform of SPO2 and the datas of SPO2 & PR. 3).With the functions of alarm upper and lower limit setup, brightness and volume adjustment. 4).Have the trend map and trend palyback funtions.
1. Our pulse oximeter is mono-color lcd display, one display mode 2. Spo2, pr 3. Three color select for our fingertip pulse oximeter 4. Low power consumption, continuously work for 50 hours with two aaa batteries 5. Low perfusion&le 0.4% four medical oximeter 6. Our fingertip pulse oximeter can be used at home or in the hospital. Package size:8.3*6.0*3.8cm, weight:52g..
Pulse Oximeter Oxyo is a Color monitor with 6 display modes, and 4 levels of brightness control available on this device. The SPO2 wave can be displayed in 2 ways according to user`s needs. Automatically power off after 4 seconds when finger out Color OLED monitor, 6 different display modes 4 level brightness. Pulse histogram and 2 kinds Spo2 wave display Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Auto power-off after 4 seconds without signal Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours
Meditech FOs3+ is a Full Color high-clearance TFT monitor with 4 display modes and the brightness can be adjustable. Alarm sets for low voltage, abnormal SPO2 and PR. It will be automatically power off without signal. Inner flash memory sets for more than 30 hours data storage. Advanced software for sleep study and monitoring. Full Color monitor, (Pixels: 160*128, 256K color) 1.3" Built-in memory stores up to 24 hours of downloadable data (USB cable included). 4 different display modes Adjustable brightness settings. Built-in, switchable alarms for SpO2 and pulse rate. Pulse histogram and SpO2 wave display USB interface ensures convey of SpO2 data, (Wireless option) Easy to use & high accuracy Small in size, and easy to carry and Light weight of 45g, batteries included Battery voltage indication: color graph Auto power-off after 4 seconds without signal 3.7V Rechargeable Lithium Polymer Battery (Charger: USB and AC charger) Synchronous display on the oximeter and computer Inner flash memory for more than 30 hours data storage Advanced software for sleep study and monitoring Power consumption: less than 20mA (wireless and alarm not work).
This fingertip pulse oximeter is compact and light in weight, easy to use with only one-key operation. The internal alarm will function while low voltage. Automatically power off after 8 seconds when finger out. The continuous working time can be 39 hours. LED monitor for extended battery life SpO2 and pulse monitoring, and histogram of pulse display Easy to use with one-key operation Small in size, and easy to carry Low voltage alarm display Auto power-off after 8 seconds without signal Light weight of 50g, batteries included Runs on standard AAA batteries and continuous working time is 39 hours Display Format: LED SPO2:35-99% in two-digit 7-segment digital Pulse Ratio:30-240BPM in 3-digit 7-segment digital; Pulse Wave: 6-segment barograph; Battery Voltage Low Indication: LED signals Dimension:58(L) í- 30(W) í- 36(H) Weight:55g (including batteries) Power Requirements: 2 AAA size 1.5V Alkaline Batteries Power Consumption: less than 40mA. Resolution: í+1% for SPO2 and í+1 BPM for Pulse Ratio. Measurement Accuracy: í+2% in stage of 70%-99% SPO2 and meaningless when stage being smaller than 70%. í+2 BPM for Pulse Ratio. Measurement Performance in Weak Filling Condition: Oxy haemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5%.
OxyS is a newly launched OLED fingertip pulse oximeter with 4 direction display modes, pulse histogram and 2kinds wave display, Alarm setting is available, it beeps when finger out, And auto power-off after 4 seconds without signal, well-designed appearance ,small in size and easy to use. Color OLED fingertip pulse oximeter, adopts latest technology, combines high quality with fashionable elements ensures well-designed appearance and steady function. 4 different display modes Pulse histogram and 2 kinds Spo2 wave display Alarm setting adjustable Beeps when finger out, Auto power-off after 4 seconds without signal Soft inside rubber design ensures a comfortable feeling when put finger in the monitor Easy to use & high accuracy and repetition Small in size, and easy to carry Low voltage alarm display Light weight of 55g, batteries included Runs on standard AAA batteries and continuous working time is 30 hours USB interface ensures convey of SpO2 data
1, Power Consumption: Smaller than 30mA 2, Operating temperature: 5 C~40 C 3, SpO2 Measuring Range:35%~100% 4, Accuracy: + 2bpm or + 2% 5, Display:OLED/LCD display 6, Pulse rate display:30~250BPM 7, Power Supply:3V/2*AAA Battery Festures: 1, Test the hemoglobin saturation & the pulse rate 2, 2 directions adjustable 3, Low battery indicator 4, Auto switch off 5, Infrared measurement method
1, Power Consumption: Smaller than 30mA 2, Operating temperature: 5 C~40 C 3, SpO2 Measuring Range:35%~100% 4, Accuracy: + 2bpm or + 2% 5, Display:OLED/LCD display 6, Pulse rate display:30~250BPM 7, Power Supply:3V/2*AAA Battery Festures: 1, Test the hemoglobin saturation & the pulse rate 2, 2 directions adjustable 3, Low battery indicator 4, Auto switch off 5, Infrared measurement method
Hello my name is Miss Wu from Guangzhou China . We have stock for oximeter and we can give you good price . Oximeter TFT 4 color :$6.4 led 4 colo $5.6 led one color:$5.3 thermometer price Gp-300$5.4 Aicare A66:$7.4 Have stock 3000pcs for Led, 4000pcs for 4colors led and 10000pcs TFT available now . Exw prices direct factory.
MAIN FEATURES: OLED color display, easy to read SpO2, PR, Pl and bar graph can be displayed on the screen Automatically power off within 8 seconds when no finger detected. Low power indicator 4 Kinds of color available (Blue, Green, Cyan and Yellow)
Its Zoe from Lijiang Technology, we are professional medical product development company located in Shenzhen. our product includes oximeter, blood pressue momitor, clinical infrared thermometer. for more detials. Oximeter Pulse Oximeter is a non-invasive device intended for the spot-check of oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate of adult and paediatric patients in home and hospital environments (including clinical use in internist/surgery, anaesthesia, intensive care ect.) Function SpO2 value display Pulse rate value display, bar graph display
Model:VM70 Screen:7 inch desplay Parameters:SPo2+NIBP Optional:ETCO2 7 inch desktop vital sign monitor features: 7" high resolution TFT dispaly Suitable for bedside,operation room ,ICU,etc Ultra thin portable&light weight design Support OEM ETCO2 is optional
Anti-movement, good low-perfusion performance. Pop-up menu to setup alarm limits Small in volume light in weight and convenient in carrying Operation of the product is simple , low power consumption SpO2 value display Pulse rate value display, bar graph display Pulse waveform display The display mode can be changed A pulse rate sound indication With measured data overruns limits and low-voltage alarm function Battery voltage indication Automatically power off function Display format and alarm limits can be saved after power off.
2 AAA Battery High Accuracy Fingertip Pulse Oxymeters Personal Digital Blood Oxengen Physical Condition One-hand Detectio Oxygen Saturation Pulse Rate Pulse Intensity
Parameter: PR, PI, SPO2, Respiratory rate Bluetooth function OLED screen Low perfusion performance, Anti-motion performance. Muti-color finger all accurate