PTFE sheet 1) Used as lining bearing pads, seals and electrical insulation parts 2) Thickness from 3mm to 70mm available 3) Maximum width can reach 2,000mm 4) High chemical properties 5) Temperature range form -180ípC to +260ípC 6) Has the lowest coefficient of friction of all the known solid materials 7) Not aging 8) Nonstick 9) Self lubricating all sizes are available on customers'requests
We are engaged in offering high quality PTFE Sheets to the clients. These PTFE Sheets are the best alternative in the conditions where high chemical resistance and non-contamination are essential. PTFE Sheets, supplied by us, are perfect in use with the guarantee of hygiene and odorless nature. Along with PTFE Sheets, we can also supply Skived and Moulded PTFE Sheets. Features : Chemically resistant Non-corrosive Non-contaminating Odorless Thickness : 0.5 mm to 6 mme
Characteristics Ptfe skived sheets are manufactured from virgin ptfe granular resins which are molded, sintered, and skived to the appropriate thickness. Ptfe sheets have outstanding characteristics, including heat and chemical resistance, low coefficient, wide range of practicable temperature from -180 ~ 260¡ãc, dielectric strength and anti-stick properties, etc. Applications Corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide Packed in wooden case with plastic film lined
Project Unit Standard Tensile strength MPa 15.0 Ultimate elongation % 150 ¡«400 Apparent density g /cm 3 2.2 ¡«2.3 Dialectic strength KV/mm 10 Resistance of surface (Working voltage 500V) 3.7 x 10 16. Thickness max:100mm Width max:1200mm Length max:1200mm.
We are a professional manufacturer & exporter on the line of PTFE product and mechanical seals in China.if you have any purchase,please send to yongxinseal at live dot com.we shall supply lowest price high quality and best service for you. Size: 100*100mm~1500*1500mm, thickness: 3~70mm 2000*1000mm,thickness: 5~70mm details: 1) Material: 100% Virgin PTFE 2) Tensile strength: >15Mpa 3) Elongation at break:>200% 4) Density: 2.1-2.3g/cm3 5) Break down voltage: 10KV/mm 6) Temp resist: 260degree. Wooden box.
Hiwell can offer Skived sheet/film, molded sheet, also have one side & two sides PTFE etched sheet/film. The PTFE sheet in semi-finished form on standard rolls,plate or converted into finish punched components in custom shapes ready for immediate assembly in to your device. Applications include laminate release sheets, wire and cable wrap, and industrial gasket. One side etched (or two side) etched PTFE sheet/film is recommended for applications where bonding of teflon film is required.
PTFE Sheet is a 100% expanded PTFE gasket material and combined with a self-adhesive strip for easy application. It can be used as a jointing on all types of flanges and can be used with almost all fluids for its excellent corrosion resistance, high pressure resistance, convenient in using, soft and stretched structure, Sticked onto sealing face (it has glue on one face) with one piece of belt, two ends of which are crossed together that would be formed a sealing gasket. So it is an ideal sealing material for enamel, glass, rough and special shaped sealing surface.
Shandong Micflon Technology Co.,Ltd. is a processing company specialized in production, marketing and research of high performance Fluorine materials with certification of ISO9001, ISO14001 and ISO45001. Our products range from PTFE, PFA, PCTFE to their machined parts, which can be mainly used in the field of Semiconductor, 5G, New Energy, Medical, Aviation, etc.. At present, our customers have spread to more than 30 countries and areas, including Europe, USA, Korea, Japan, Brasil and China. Since establishment of our company, we are committed to research and production of high performance of Fluorine materials, we also started our Modified PTFE compounds project from the second half year of 2022. As a quality-driven company, our independent research laboratory undergo strict testing from raw material to finished products, ensuring our stable and high-level quality standards. Micflon is your reliable fluorine material solutions partner.
Chemical Properties: 1 electric insulation material. 2 Excellent electrical properties 3 Good low and high temperature resistance 4 heat-conductive, 5 Self lubricate with lowest co-efficient of friction,no oil lubrication& 8203; 6 acid and alkali resistance, Chemical resistant 7 non-inflammable,anti-aging etc.. Product Size: PTFE SHEET , Teflon sheet PTFE / teflon molded sheet square 1200kgs/case/0.85cbm case size, 1070*1070*740mmm for 1000 square products
Re-structure PTFE sheet Item unit direction Compressibility % 20 Recovery % 40 Tensile strength mpa 14.0 Creep deformation laxation % 37 Sealing capability ml/h 0.1 Temperature 260 Pressure bar 65 105 Ph 0-14 Density g / CM 3 1.8~2.3 2000x100x0.1cm/volume
Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Applications bearings gaskets sealing rings wear rings By plastic pallet or wooden pallet
silica PTFE sheet is a style of modified PTFE, It contains silica particles and suitable for almost all the media of PH0-14, especially for the strong acid and strong base class (except hydrofluoric acid),It is also suitable for the sealing of the solvent,water,steam,chlorides and other media.It is applies to high pressure and temperature,varieties of fluid that the sealed condition is more demanding operating conditions, strong acids, alkalis,gases,solvents,hydrocarbons,water,chlorine,aluminum chloride,hydrogen peroxide,etc
glass microsphere PTFE sheet is modified sealing plate, processing through a special manufacturing method. The PTFE is filled a certain percentage glass microspheres in order to improve its weaknesses of the cold, so this style modified PTFE has excellent sealing properties and resistance and can be used in glass steel pipe trail, acid and alkali. But alkali lower weak.
Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
Glass microsphere PTFE sheet is modified sealing plate, processing through a special manufacturing method. The PTFE is filled a certain percentage glass microspheres in order to improve its weaknesses of the cold, so this style modified PTFE has excellent sealing properties and resistance and can be used in glass steel pipe trail, acid and alkali. But alkali lower weak.
Thickness: 0.5-10mm, Length: 1500mm, 3000mm, 4500mm It is used as sealing material for various kinds of flanges.It can be used in chemical industry,food industry,pharmacy industry,semiconductor industry,aerospace industry,petrochemical industry,paper industry,shipbuilding industry and medical equipments.
Expanded PTFE sheet is manufactured by expanding 100% virgin PTFE that uses a proprietary process to produce uniform and highly fibrillated microstructure with equal tensile strength in all directions. The resulting product exhibits characteristics significantly different than conventional PTFE sheet. Expanded PTFE is much softer and more flexible than regular PTFE sheet, so it conforms easily to irregular and rough surfaces.
Features: 1) PTFE sheet is manufactured with moulding method using PTFE granular resin 2) PTFE is the most chemical-resistant material of all known plastic 3) Does not age 4) Has the lowest coefficient of friction of all known solid materials, and a wide range of practical temperature from -180oC ~ +260oC 5) Applications: lining bearing pads, seals and electrical insulation Specifications: 1) Sizes: a) Thickness: 4 - 100mm b) Width x length based on customers' requirements 2) Equipment: a) Pressurer: 1set, max. pressure 4,200MT b) Working platform: 2.75 x 2.75m 3) Quality standards: a) Flat surface, no wave b) Plus tolerance (4 sides) Main properties:1) Apparent density: 2.10~2.30g/cm32) Tensile strength (min.): 15.0MPa3) Ultimate elongation (min.): 150%4) Dielectric strength (min.): 10kV/mm
FG
