about our high-speed Progressive Stamping Die for Armature Rotor and Stator
Â
Service life:150,000,000
Stroke speed: 250~350/min
Materials: carbon steel, hotdipped galvanized steel, SECC, silicone steel, aluminum, brass, copper etc.
Quality standard: ISO9001:2008.
 Jiarun (Shenzhen) Precision Science & Technology Co.,Ltd. is mainly engaged in manufacturing stamping die, progressive die and compound die. Main products: stator and rotor, motor bracket, shredder blade in China.
Â
Manufacturing the stamping die with high quality and endurance, especially on the modulus of continuity. Designing the stamping die by Solidworks makes the quotation accurately and clearly. With rich experience on developing moulds and producing metal products,we can provide you with product quality assurance and good service.Â
If you need us to open mould, quote, design the motor, or need our cap mak ing machine please send us the drawing or the sample, and tell us which material you would like us to use.Welcome to check our price and technology.
Omniscient International, an ISO & CE certified manufacturer, offers Brush Holders for Rotor & Stator Motors, engineered for high reliability in rotating electrical machinery. Made from durable brass or stainless steel, with a golden or silver metallic finish, these brush holders ensure precise brush positioning, consistent contact pressure, and minimal wear during high-speed rotation. Ideal for both rotor and stator assemblies in industrial motors, these holders are widely used in slip ring motors, alternators, and winding machines. Available in standard sizes or customized as per OEM drawings for efficient integration and long-term performance.
About stamping Die for Motor Rotor and Stator, new punching machine
Service life:150,000,000
Stroke speed: 250~350/min
Materials: carbon steel, SECC, silicone steel, aluminum(according to your needs)
Quality standard: ISO9001:2008
Nearby port: Shekou (Shenzhen, China)
Shipment: Your goods will be shipped in 35 days after payment.
Package: We usually use wooden cases for packing; your own special requirements are available.
Â
  If you need us to open mould, quote, design the motor, or need our cap making machine please send us the drawing or the sample, and tell us which material you would like us to use.Welcome to check our price and technology.
more information : www.szjiarun.com
1540 Progressive Stamping Die For Rotor And Stator Suppliers
Short on time? Let Progressive Stamping Die For Rotor And Stator sellers contact you.
1. Technologyï¼?progressive die stamping
2. Material type: SUS 301(HV500)
3. Material Thickness: 0.3mm
4. Press type: 45T high speed press
5. Cavities: 3 cavities
6. Specification:
9 steps stamping process with 0.63m length stamping mould;
FAQ:
1. Do you have a daily production report?
Yes, we have complete production record from incoming inspection to shipping inspection.
2. Are significant characteristics controlled in production?
We use SPC X-R to control.
3. Which material do you use for packa
By corrugated carton.
4. Which currency can we buy in?
We can deal in USD / Euro currency/RMB. url:http://www.invi-tech.com
Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor
Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1
material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass
MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304
Sculpting Soap Perfection: The Foot Operated Artisanal Stamping Marvel
Introducing the Foot Operated Soap Stamping Machine: Revolutionizing soap production through innovative design and precision engineering. This remarkable machine combines cutting-edge features, adaptable technical specifications, and exceptional benefits, all housed within a standard-sized framework.
Features: Crafted with a robust cast iron body, the machine boasts durability and longevity. The critical components, including the die mold, are expertly fashioned from both mild steel and stainless steel, ensuring reliability and resistance to corrosion.
The ergonomic design takes center stage with an adjustable seat, catering to user comfort during prolonged stamping sessions. The machine's adaptable ram and weight system guarantee seamless stamping, allowing for precision adjustments. This unique system also empowers users to fine-tune the pressure exerted by effortlessly modifying the position of the dead weight, enhancing control and flexibility.
Technical Specifications:
Size: Standard
Body Material: Cast Iron
Die Mold Materials: Mild Steel and Stainless Steel
Operation: Foot Operated
Ergonomics: Adjustable Seat
Pressure Control: Adjustable Ram and Weight
Soap Ejection: Ejector Pin-equipped Die Mold
Use: Printing Soap Cakes & Bars
Uses: The Foot Operated Soap Stamping Machine finds its place at the heart of soap production facilities, streamlining the process of imprinting intricate designs onto soap cakes and bars. Its versatile capabilities extend to a wide range of soap types and sizes, offering manufacturers the ability to create captivating and customized products that stand out in a competitive market.
Benefits:
Precision and Consistency: The machine's adjustable settings enable meticulous control, ensuring uniform and consistent imprints on each soap.
Enhanced Ergonomics: The ergonomic seat promotes operator comfort, reducing fatigue during prolonged usage and increasing overall productivity.
Flexibility in Pressure: With the capacity to adjust pressure levels, soap manufacturers can tailor the stamping process to suit different soap compositions and designs.
Effortless Operation: The foot-operated mechanism simplifies usage, allowing operators to focus on precise positioning without the need for constant manual adjustments.
Efficient Ejection: The incorporated ejector pin facilitates the seamless removal of stamped soaps from the die mold, streamlining the workflow.
Durability and Hygiene: The choice of cast iron, mild steel, and stainless steel materials ensures longevity, resilience against wear, and compliance with hygiene standards.
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Customized stamped parts progressive die
Stamped Parts Progressive Die, Progressive Stamping Die Factory
Dongguan Huisoelec Limited, established in August 2009 and located in the hometown of Chinese molds - Chang'an Town, Dongguan City, Guangdong Province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, IC, 3C products and outdoor waterproof fields and so on.
No. Item Description
1 Tooling type Stage die/progressive die/drawing die
2 Tooling Material RK887, CD650, KD20, SKD11, SKH9, DC53
3 Application Electronics, electrical appliance, auto parts, medical, communication and military field etc.,
4 Punching machine 25T, 35T, 45T, 60T, 110T, 200T, 250T
5 Lead time 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling)
6 Tolerence ±0.002
7 Mold life Max 100kk, depends on the clients need
8 Packing Plastic, carton or wooden box etc., according to the clients requirements
Product name
Silicon steel stator and rotor lamination for motor and generator
Material
Cold rolled non-oriented silicon steel
Supplier
Wisco, bao steel , shougang group, tisco
Process
Heat treatment, annealing and turning surface
Standard
Din gb iso jis
Range
Customized
Stacked length
Max 1100mm
Service
Oem&odm
Packing
Pp + solid sea-worthy carton with special process of antirust
Delivery time
10 days if existing compound tools are available/50 days if we need to making tools
1540 Progressive Stamping Die For Rotor And Stator Suppliers
Short on time? Let Progressive Stamping Die For Rotor And Stator sellers contact you.
