Prestressed Anchorage Suppliers and Manufacturers

12.7 15.2 MM Prestressed anchorage for building material Widely used in highway bridges, railway bridges, urban interchanges, urban light rail, high-rise buildings, water conservancy and Hydropower dams, port terminals, rock slope protection anchorage, foundation reinforcement, tunnel roof anchor, prestressed grid, subway, large buildings and halls, warehouse buildings, tower buildings, heavy lifting, sliding membrane intermittent propulsion, etc. Bridge and tunnel jacking, large vessels and ships, sleepers, replacement of bridge bearings, bridge and building reinforcement, steel reinforcement, anti-magnetic and anti-corrosion engineering (fiber anchorage), carbon fiber reinforcement, pre-tensioned Beam Yard construction, external prestressing engineering, cable stayed, suspension and other projects.

Prestressed anchorage.

Prestress Anchorage, Casting, Anchor Cone, Anchor Head, Wedge.

Application : auxiliary reinforcing strand concrete structure, such as large-span bridges on railway and highway, overhead crane beams, rock and earth anchoring construction, frameworks of multistoried factory buildings, etc. Standard:gb/t5224-2003, astm a416-2002, bs5896, jis g3536, as/nzs4672.1:2007. Diameterú¦9.53mm-17.8mm Tensile strength gradeú¦1470/1570/1670/1860/1960mpa.

Grades: 250, 270, 300KSI. Tensile Strength: 1770, 1860, 1960MPa. Sizes: 3/8", 7/16", 1/2", 3/5", 7/10", 17/20": ASTM A416 - 9.53mm, 11.11mm, 12.7mm, 15.24mm BS5896 - 9.3mm, 9.6mm, 11.0mm, 11.3mm, 12.5mm, 12.9mm, 15.2mm, 15.7mm GB/T5224 - 9.5mm, 11.1mm, 12.7mm, 15.2mm, 15.7mm, 17.8mm, 21.6mm Baling strip, wrapped in anti-rust plastic paper for bonded strand, pp woven cloth for unbonded strand, wood pallet or wood shaft optional for export.

Low relaxation high tensile strength 7 wires steel, low relaxation H.T.S. Prestressed steel wire, prestressed anchorage, including round anchor plate, flat slab anchor plate, wedge, bearing base plate, spiral hooping, connector.

Prestressed anchors, wedges, casting anchorages, flat anchors, and tensioning tools, such as jacks, pumps, and ducting machines.

Prestressed concrete steel strand, prestressed concrete wire, prestressing strand, post tension anchorage, anchor plate, anchor head, wedges, galvanized steel strand.

Anchorage is refers to the permanent anchor device used in prestressed concrete, is the method in the structure or component, to maintain the tension of the prestressed reinforcement and pass it to inside the concrete anchor tools, also called prestressed anchorage. Material: Q235,Q345 Size: KM15-1860, KM18-1860, KM22-1720, KM22-18

Prestressed concrete steel strand, prestressed concrete wire, prestressing strand, post tension anchorage, anchor plate, anchor head, wedges, galvanized steel strand.Export

Flat anchorage We are leading prestressing company and manufacturing various prestressing products 1set

Qyc front-end fixed jacks have internal re-usable anchor which can automatically clamp and loosen the wedge, they are mainly used for bfm15 and bfm13- type various single tensioning with bonded and unbounded. Notice: qyc type front-end fixed jacks could be matched with different size, length of the top cover, retreat anchor device, to used in the experiment by root tension pre-tightening, tension retreat anchor and stay cable tone with single cable. Woode case.

Standard: ASTM, BS, DIN, GB. Wire Diameter: 4.00mm-12.00mm. ... Prestressed PC Steel Wire. Nominal Diameter, mm(in) Tensile Strength, min, Mpa (psi) Type BA Type WA 6.35(0.250) 1655(240 000) 1655(240 000) 7.01(0.276) 1620(235 000) 1620(235 000)

Rebar mechanical anchorage is a basic technology for all kinds of concrete structure engineering, and the reinforcement of steel bar needs to be anchored in order to secured its strength .Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends.It is approach greatly simplifies rebar placement and reduces congestion .Rebar End Anchor Plate is ideal for all forms of construction, including: Nuclear Powerplant ,subways, bridges, dams, high-rises building, water treatment plants, stadiums ,Airport. Rebar Mechanical Anchor Plate is widely applied used for Column-beam Joint and Roof/Column ,Anchor bolts applications. Installation of Rebar Mechanical Anchorage: Step 1:Threaded on Rebar Ends by Mechanical Splicing machine Step 2:Connect headed bars with Rebar Mechanical Anchorage

Rebar mechanical anchorage is a basic technology for all kinds of concrete structure engineering, and the reinforcement of steel bar needs to be anchored in order to secured its strength .Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends.It is approach greatly simplifies rebar placement and reduces congestion .Rebar End Anchor Plate is ideal for all forms of construction, including: Nuclear Powerplant ,subways, bridges, dams, high-rises building, water treatment plants, stadiums ,Airport. Rebar Mechanical Anchor Plate is widely applied used for Column-beam Joint and Roof/Column ,Anchor bolts applications. Installation of Rebar Mechanical Anchorage: Step 1:Threaded on Rebar Ends by Mechanical Splicing machine Step 2:Connect headed bars with Rebar Mechnical Anchorage

#PRECASTBOUNDARYWALL #MANUFACTURER We are Known As... Precast Boundary Wall Manufacturer Delhi Precast Boundary Wall Manufacturer Jaipur Rajasthan, Precast Boundary Wall Manufacturer Noida & Greater Noida, Precast Boundary Wall Manufacturer Gurugram Gurgaon, Precast Boundary Wall Manufacturer Punjab, Precast Boundary Wall Manufacturer Haryana, Precast Boundary Wall Manufacturer Uttarpradesh, Precast Boundary Wall Manufacturer Madhyapradesh 6 to 10 Feet Clear Hight COLUMN : 150x150 MM PANEL : 2010x300x50 MM M25 to M40 Grade Available

Name: unbonded prestressed concrete strand Standard:ASTM A416; BS5896;JISG3536;AS1311 Structre: 1*7; 1*19 Specification: 9.53mm;12.7mm;;15.24mm,17.8mm;21.8mm COIL,3.5T-4T 2.3m*2.3m*0.4m

Name: unbonded prestressed concrete strand Standard:ASTM A416; BS5896;JISG3536;AS1311 Structre: 1*7; 1*19 Specification: 9.53mm;12.7mm;;15.24mm,17.8mm;21.8mm COIL,3.5T-4T 2.3m*2.3m*0.4m

OD:600-1400mm Model:A,AB,B,C