Multifunction Power Meter: CPM-12D is a din rail mounting multifunction power meter with high accuracy measurement for single phase and three-phase system. Measuring all basic parameters ; V, I, P, Q, kWh, kVarh etc.. 1 RS485 Modbus RTU communication port as default, LCD display in front panel with buttons for programming. Auto wiring change (see remark as below) via software CE and FCC approved Remark: Auto wiring change have certain condition limit, please refer to operation manual for further details. Â Applications Energy management system Factory automation Intelligent power panel Industrial automation Power Grid automation Community power monitoring Intelligent green building
Product Overview This portable optical power meter with red light source is an accurate portable instrument with long service time specially designed for the installation, operation and maintenance of fiber-optical network. It features fine appearance, controllable backlight display, automatic power off, supper wide testing range for optical power, high accuracy, self-calibration and universal interface. Whats more, the linearity index(mW) and nonlinear index (dBm) will be displayed in a same screen. The optical power meter can be used alone for saving power. Product features The optical power meter with red light of 10mW or 1mW features open self-calibration which could be operated by the user. With two AA batteries, the optical power meter can work continuously for 40 hours. It can work continuously if working with a red light source of 10mW, or 42 hours with a red light source of 1mW. the linearity index(mW) and nonlinear index (dBm) will be displayed on the same screen of the optical power meter. Special universal interface for FC/SC/ST, easy to transformation. Optional auto off. Optional backlight display. Optional steady/flashing red light.
Profile: MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S,COS, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1) Measured Scope: The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data. Measured accuracy Parameters Display Direction Accuracy Voltage 0~9999.9kV Class 0.2 scope:5%~100%V Current 0~9999.9kA Class 0.2 scope: 5%~100%A Zero sequence Current Class 0.5 Power factor -1~+1 Directional Class 1 Frequency 45~65Hz ¡À0.01Hz Active Power -9999~9999MW Directional Class 0.5 Reactive Power -9999~9999MVAr Directional Class 0.5 Apparent Power 0~9999MVA Class 0.5 Active Demand -9999~9999MW Class 1.0 Reactive Demand -9999~9999MVAr Class 1.0 Active Energy 0~9999999.99Mwh Directional Class 1.0 Reactive Energy 0~9999999.99MVArh Directional Class 2.0 Phase Angle 0.0¡ã~359.9¡ã Directional Class 2.0 Current total harmonic % 0~100% Class 2.0 Voltage total harmonic % 0~100% Class 2.0. 1unit/carton, 36 unit/big carton.
1.Can be operated in measurement of output power with nw, uw, mw, dB and dBm readings function 2.Optional RS232 Remote Control Interface 3.0.01dBmu precision 4.Can be used for absolute power measurement and relative measurement of link loss. 5.Compact design, portable, light weight, energy-saving 6.Battery for power supply 7.Large LCD display screen, helpful to your eyes. Weight:450g Dimensions 14.0í-7.8í-3.8cm
Feature * DDSU1877 is used to measure the rated frequency of 50Hz, Rated voltage below 265V, single phase AC smart power. * Made of fine quality ABS material, impact resistance, heat-resistant, cold-resistant, and with fine insulating effect. * Alarm when low energy/overload/fraud. * With RS485, GPRS, 4G, or other communication functions for reading meter and setting parameters. * The smart meter adopts the special large scale integrated circuit and special technology to ensure the accuracy and reliability of measurement. * 5+1 bit wide temperature LCD display, real-time display voltage, current, power, total energy kWh. * Comfortable guide rail installation mode 35-36 mm. * Calculate total consumption, real-time view of power consumption via mobile phone. * APP remote control. You can easily control your devices when you leave your home or fast-forward your home, easily control the status of your home device at any time via the mobile APP. * Long service time by high brightness LED indicator. * It can realize the functions of automatic tripping when the balance is exhausted. * After you pay for the electricity, the energy meter could display the remaining electricity. * It could realize remote manual closing and open the energy meter. * The Single phase WiFi energy meter will update the Kwh data when disconnect with wifi. It will not lose the historical data if there is a power outage.
True-RMS measuring parameters ANSI and IEC 0.2 accuracy class Power quality analysis 4 quadrant energy 2MB onboard memory, can be extended to 16M Data logging High-speed RS485, Ethernet port (option) Measure individual harmonics from 2nd to 63st (option) TOU, 4 Tariffs, 6 Seasons, 6 Schedules Three years warranty With PC management software; web browse data APPLICATIONS Metering of distribution feeders, transformers, generators, capacitor banks and motors Medium and low voltage systems Commercial, industrial, utility Power quality analysis Data logging Monitoring system
Laser Source Power Meter The Laser Source Power Meter provides an economical, stable laser source for point-to-point attenuation measurements. It features a rugged design that withstands the harsh test environments of fiber optic cable installation and maintenance.
IoT Power Meter A IoT power meter is a data-transmitting meter that helps industries monitor and manage three-phase power consumption. It transmits real-time energy consumption data to a server in the cloud, allowing for better management of energy consumption and industrial equipment. Acrel ADW300 energy meter is mainly used to measure three-phase active electric energy of low-voltage network, with RS485 communication and 470MHz wireless communication function, which is convenient for users to monitor, collect and manage electricity consumption.
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COS¦µ, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured and tested in accordance with Quality Assurance System ISO 9001. EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1). Exterior Size:91*91*72mm. 0.5Kgs.
Optical power meter pop-560 Pop-560 power meter is the newest-generation handheld fiber optical tester. It can offer the Best performance for the daily maintenance for fiber network, and cwdm system, dwdm System and fttx network. The perfect test function and test ensurence are all ideal for Indoor or field-testing. Features: The most perfect testing function: 1. Three kinds of modulated signal recognitiong270hzb1khzb 2khz 2. Auto-wavelength recognition, no need for communication Between the sources and power meter. Save test time and Decreases the potential error. 3. 21 calibrated wavelengths offered to meet the customersªtesting Requirement. Such as fttx 1490nm. 4. The moveable connector provides several types of connector Included fc, sc etc. 5. Superior testing range: -70dbm p +10dbm or -50dbm p +26dbm Nthe most perfect power supply and power management: 1. Internal rechargeable li batterybaa battery and ac adapter. 2. Auto power-off. 3. More than 200hr battery operating. Nthe most perfect testing guarantee: 1. Superior stability to ensure the testing performance and repeatability. 2. Wide lcd display that provides the most complete testing information: wavelength, Modulated signal, all kinds of conditions. 3. High quality and rugged design, ideal for field testing.
Energy management system Factory automation Intelligent power panel Industrial automation Power Grid automation Community power monitoring Intelligent green building
FU2200A digital Ethernet power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for intelligent power distribution or plant automation systems. All monitored data is available via a standard digital RS485 communication port, which is based on the Modbus RTU protocol. FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port.
Power supply (AC/DC) AC 85-265V/DC 85-330V, DC18-90V (option) Power Consumption:
FEATURES Can measure all the electrical parameters Four modules can choose Can measure the harmonics High accuracy 0.5s PT,CT transformation ratio is settable PARAMETERS Electrical parameters Power supply (AC/DC) AC85-265V / DC85-330V, DC18-90V (optional) Power consumption:
FU2200B RJ45 digital power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200B with Ethernet port as photo shows here. Also two color of the shell can be choose, white or black. FEATURES True-RMS measuring parameters ANSI and IEC 0.2 accuracy class Power quality analysis 4 quadrant energy 2MB onboard memory, can be extended to 16M Data logging High-speed RS485, Ethernet port (option) Measure individual harmonics from 2nd to 63st (option) TOU, 4 Tariffs, 6 Seasons, 6 Schedules Three years warranty With PC management software; web browse data APPLICATIONS Metering of distribution feeders, transformers, generators, capacitor banks and motors Medium and low voltage systems Commercial, industrial, utility Power quality analysis Data logging Monitoring system PARAMETERS Electrical parameters Power Supply (AC/DC) AC85-400V / DC85-330V Power consumption:
Introduction Low cost solution for power line parameter monitor, standard with LED display, visual display of the most commonly used data Using electrical parameters means using several analog or digital single-function products such as ammeters, voltmeters or watt meters. 0.5class high-precision performance, can instead of your old analog indicator or digital single-function products such as ammeters, voltmeters or watt meters etc. Main features Class 0.5 power and energy Current measuring .../5 or .../1 A Optional RS-232 Modbus/RTU Communications Backlit red LED display Optional mini type installation dimension (72X72mm) ITF Technology: galvanic insulation protection inputs outputs Universal series power supply (85-265VAC/DC)
Introduction Advance power meter, provide RS-485 communication port, easy for user connect to PLC and build SCADA system. Higher measurement accuracy(0.2) and system stability, it is cost effective ideal for OEMs and panel builders solution. (Option LED display screen) Main features Class 0.5 power and energy Current measuring .../5 or .../1 A Backlit LCD display Expandable input / output modules (up to 3 modules) With RS-485 Modbus/RTU Communications With 2 channel Pulse Output (PO) for active energy &reactive energy counting Optional 1 channel Analog Output (AO) ITF Technology: galvanic insulation protection inputs outputs Universal series power supply (85- 265VAC/DC)
Introduction Three phase electrical network power quality detection device, provide energy consumption and generate; THD (Total Harmonic Distortion); Harmonic individual data reading. Build-in 4 tariffs energy logger function, with onboard memory can record last three month energy data, free to set max 12 segment record period, can be use as a commercial billing unit. Main features Class 0.5S power and energy Current measuring .../5 or .../1 A Backlit LCD display Expandable input / output modules (up to 3 modules) With RS-485 Modbus/RTU Communications With 2 channel Pulse Output (PO) for active energy &reactive energy counting Optional 1 channel Analog Output (AO) Optional 4 channel Digital Input (DI) and 2 channel Digital Output (DO) Record and read multi- tariffs ratio, Up to 3 months ITF Technology: galvanic insulation protection inputs outputs Universal series power supply (85- 265VAC/DC)
Introduction New 194J series Smart Power Manager is the more powerful meter than 194Y series power analyzer. With higher precision and more measurement parameters. This meter is the latest series meter developed in 2015 by Blue Jay tech. It is the ideal choice for monitoring and controlling of power distribution systems. Main features Class 0.2 power and energy Current measuring .../5 or .../1 A Backlit LCD display Expandable input / output modules (up to 3 modules) With RS-485 Modbus/RTU Communications Measured varies of power parameter. (Max demand/ unbanlance/crest factor/K factor...) Optional 2 channel Digital Input (DI) and 3 channel Digital Output (DO) Record and read multi- tariffs ratio, Up to 3 months Provide max 50 lists SOE record function ITF Technology: galvanic insulation protection inputs outputs Universal series power supply (85-265VAC/DC)
Introduction High-end multifunction power analyzer manufactured by Blue Jay Technology. Higher measurement accuracy, and powerful functions. With its four direct access keys and TFT displays, friendly full text interface helps user operate device more easy. Max 52th harmonic individual monitor, let user clear grasp of the present electrical grid quality. Main features Class 0.2 power and energy Current measuring .../5 or .../1 A Clear and large matrix LCD screen Expandable input / output modules (up to 3 modules) With 2 channel Pulse Output (PO) for active energy &reactive energy counting With RS-485 Modbus/RTU Communications Optional 1 channel Analog Output (AO) Optional 4 channel Digital Input (DI) and 2 channel Digital Output (DO) Record and read multi- tariffs ratio, Up to 3 months Electrical parameter MD record ITF Technology: galvanic insulation protection inputs outputs Universal series power supply (85-265VAC/DC)
