PRODUCT OVERVIEW
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN
10268:2014, AASHTO LRFD: 2007 Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high
loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc.
with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior
design, which is convenient for installation and maintenance during operation
2. PRODUCT CHARACTERISTICS
VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences
the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures.
Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing.
Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point.
Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements.
To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods:
two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117
standards
Dimensions of upper plate in longitudinal direction
Dimension of center point of anchor bolts of the upper plate on
longitudinal direction
B: Dimension of the upper plate on transverse direction
Dimension of center point of anchor bolts of the upper
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN
10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high
loads, displacements and wide angle rotation.
This type of bearing is suitable for middle-range span structure, continuous bridge structure etc.
with a load capacity of 60000kN or above depending on projects requirements. VHB pot
bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation
PRODUCT CHARACTERISTICS
VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under thepressure of the load, the elastomeric pad experiences
the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures.
Pot bearing is divided into 2 main types: Fixed pot
bearing and sliding pot bearing.
Fixed pot bearing: The bearing only allows the head of
structure to have rotary movement and transfers the
pressure through a fixed point.
Sliding pot bearing: This type of bearing, including free
sliding bearing and guided sliding bearing, allows the
head to have both rotary movements and transversally
or multidirectional movements.
To ensure the long-life durability, VHB pot bearing is
protected against corrosion by the following methods:
two-component epoxy coat, PU-based painting
(Polyurethane), hot dip galvanization according to
ASTM A123 standards and especially the Al â?? Mg
spraying method (at the ratio of 5% Al and 95% Mg)
which ensures the anti-corrosion durability of up to
100 years, proven by salt-spraying test in 6000 hours
(8-hour dry-wet cycle repetition) under ASTM B117
standards.
1. PRODUCT OVERVIEW
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN
10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D5212â??03, BS5400, EN1337, KS4420).
VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation.
This type of bearing is suitable for middle-range span structure, continuous bridge structure etc.
with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior
design, which is convenient for installation and maintenance during operation
PRODUCT CHARACTERISTICS
VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences
the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts
between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures.
Pot bearing is divided into 2 main types: Fixed pot
bearing and sliding pot bearing.
Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point.
Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements.
To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods
two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117
VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420).
VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projects requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation.
2. PRODUCT CHARACTERISTICS
VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures.
Pot Bearings are divided into 2 main types:Â Fixed pot bearings and sliding pot bearings.
Fixed pot bearings:Â The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point.
Sliding pot bearings:Â This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements.
To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
3. PRODUCT INFORMATION
Based on the characteristics, VHB pot bearings are divided into 3 types:
37003 Pot Bearing Suppliers
Short on time? Let Pot Bearing sellers contact you.
We are an eminent entity, affianced in providing high grade assortment of Pot-PTFE Bearings that also includes fixed pot bearings. These bearings are manufactured using high quality poly tetra fluoro ethylene with the proper assistance of a team of diligent professionals at our advanced unit. The offered bearings are widely cherished to be installed during construction of bridges for enhancing the capability to tolerate heavy traffic loads. These Pot-PTFE Bearings can be bought from us at affordable prices.
Features:
Rigid structure
Corrosion resistance
High tensile strength
Flawless design
VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420).
VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation.
2. PRODUCT CHARACTERISTICS
VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures.
Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings.
Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point.
Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements.
To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by
the salt-spraying test in 6000 hours.
VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420).
VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation.
2. PRODUCT CHARACTERISTICS
VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures.
Pot Bearings are divided into 2 main types:Â Fixed pot bearings and sliding pot bearings.
Fixed pot bearings:Â The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point.
Sliding pot bearings:Â This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements.
To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by
the salt-spraying test in 6000 hours.
VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420).
VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation.
2. PRODUCT CHARACTERISTICS
VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis.
Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures.
Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings.
Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point.
Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements.
To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by
the salt-spraying test in 6000 hours.
Standard sugar mill practices limit the bearing pressure to about 10 MPa. The bronzes that are common in sugar mills have a recommended maximum bearing pressure of up to 100 MPa for phosphor bronze and 50 MPa for tin-bronzes. These materials, along with Gun metal, White metal and some copper-based alloys, were made in compliance to the IS and BS standards, These are appreciated for their resistance against abrasion and durability.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
We are leading manufacturer, supplier and exporter of Ball Bearing in Ahmedabad, Gujarat, India. We manufactured all types of ball bearings like deep groove ball bearing, miniature ball bearing, angular contact ball bearing and thrust ball bearings in competitive prices. These bearings are majorly used in thresher machine, rotovator machine, dal mill machine, food processing machine, conveyor machine, automobile machine and pharma machinery & all types of agriculture machineries.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well.
Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball Bearings : 6301 2RS, 6302 2RS, 6304 ZZ, 6305 2RS, 6309 ZZ, 6311 ZZ, 6312 ZZ, 6201 2RS, 6201 ZZ, 6202 2RS, 6202 ZZ, 6203 2RS, 6204 2RS, 6205 2RS, 6205 ZZ, 6206 2RS, 6206 ZZ, 6207 2RS, 6207 ZZ, 6208 2RS, 6208 ZZ, 6213, 6001 2RS, 6005 2RS, 6007 2RS, 6013 2RS, 6017 2RS, 6024 2RS, 5203 ZZ, 44643/10, 62310 2RS, 608ZZ, 608 2RS, 607ZZ, 607 2RS, GE40ES 2RS, GE30ES 2RS.
Bearing Housing : UC208-24 FL3, UC209 FL3, UC211-32 FL3, UC213-40, UCP205 Black, UCP205-16 Black, UCP205 FL3, UCP205-16 FL3, UCP206 Black, UCF204, UCF205, UCT208, UCT210, UCT211, UCT212, UCT213.
As one of the popular types of bearings, Single Row Angular Contact Ball Bearing is designed to withstand both radial and axial loads. With improved performance and efficiency, these bearings are highly demanded in various industrial applications and offer an affordable yet reliable solution for machinery.
At our company, we are committed to providing our customers with the best quality Single Row Angular Contact Ball Bearings that are manufactured using advanced technologies and techniques. With our team of skilled professionals, we strive to deliver top-notch products that meet or exceed the expectations of our clients.
Features of Single Row Angular Contact Ball Bearings
There are many different types of bearings available in the market, but the Single Row Angular Contact Ball Bearing stands out due to its unique features. These are as follows:
1. High Load Capacity: Single Row Angular Contact Ball Bearings can withstand high radial and axial loads, making them ideal for use in machinery with heavy-duty applications.
2. Increased Efficiency: These bearings offer low friction and high accuracy, resulting in improved efficiency and less wear and tear on machinery.
3. Durability: With their robust build, these bearings have a long service life, reducing the need for frequent maintenance and replacement.
4. Versatility: Single Row Angular Contact Ball Bearings are utilized in various applications such as pumps, turbines, compressors, and machine tools, to name a few.
5. Easy Installation and Maintenance: The bearings are easy to install and once installed, they require minimal maintenance, making them a convenient choice for machine operators.
Applications of Single Row Angular Contact Ball Bearings
As mentioned earlier, Single Row Angular Contact Ball Bearings are used in various industrial and mechanical applications due to their high load capacity, increased efficiency, and durability. Here are a few applications where these bearings are most commonly used:
1. Machine Tools: These bearings are used in machine tools, such as lathes and drilling machines, to provide smoother and more accurate movements.
2. Pumps and Compressors: Single Row Angular Contact Ball Bearings are used in pumps and compressors to provide support and reduce friction, thus improving their efficiency.
3. Automotive Industry: These bearings can be found in the wheels and other moving parts of vehicles where they offer durability and increased performance.
4. Aviation Industry: These bearings are utilized in engines, landing gears, and other critical areas of aircraft, where they ensure smooth and reliable operation.
5. Industrial Robotics: Single Row Angular Contact Ball Bearings are widely used in industrial robots to provide accurate and fast movement, thus improving their overall performance.
Size : 10cmx10cm/ 8cmx8.5cm/ 8.5x5cm/ 9cmx4cm/ 4.5cmx5cm (dia top x height);
Design: Round pot, Square pot
Packing: 500 pcs/ carton box. Size of box 45x45x43cm
Delivery Time: 15-25 working days after receiving deposit
Payment: TT, L/C or Western Union.
Size : 10cmx10cm/ 8cmx8.5cm/ 8.5x5cm/ 9cmx4cm/ 4.5cmx5cm (dia top x height);
Design: Round pot, Square pot
Packing: 500 pcs/ carton box. Size of box 45x45x43cm
Delivery Time: 15-25 working days after receiving deposit
Payment: TT, L/C or Western Union.
Various sized pots manufactured with coir fibre and moulded with an organic rubber compound.. Pots will maintain their shape for up six months while plants are growing. The plant can then be planted in the ground with the pot. The pot will decompose over time. Coconut fiber potare made from coconut fiber. As good crop products and environmental protection.
The gardening industry is guilty of using far too much disposable plastic â?? here is an excellent, durable, re-useable, and more eco-friendly green alternative.
Made from coir, a natural fiber extracted from the husk of a coconut, a coir pot is a strong alternative to materials such as plastic. The biodegradable pot needs no repotting so waste is cut down, and the reduced root disturbance results in healthier and stronger plants in your home, garden, or allotment.
