The Coal Spontaneous Combustion Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.It can be used as a monitoring system for large-scale coal spontaneous combustion test bench and sample test bench, as well as provides experimental conditions for a multi-direction science such as coal fire prevention and fire science and improves the efficiency of coal mine production.
The Coal Spontaneous Combustion Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.It can be used as a monitoring system for large-scale coal spontaneous combustion test bench and sample test bench, as well as provides experimental conditions for a multi-direction science such as coal fire prevention and fire science and improves the efficiency of coal mine production.
Coal is a nonrenewable fossil fuel that is combusted and used to generate electricity. Mining techniques and combustion are both dangerous to miners and hazardous to the environment; however, coal accounts for about half of the electricity generation in the United States. With our years in the coal mining sector, we can supply the quantity of 1000-2000MT every month.
The Coal Spontaneous Combustion Underground Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.The system analysis host is based on infrared spectroscopy technology, has pulse infrared light source, and forms 10 spectral bands in mid-infrared region through narrow-band optical filter for gas analysis; ultra-high sensitivity patented optical technology with enhanced beam can be realized through 10 narrow-band optical filters, and ultra-narrow optical filter can remove the interference of background gas; Multi-spectral region can help to minimize the cross sensitivity. It can measure up to 9 kinds of gases at the same time. Multi-point sampler can freely expand gas sampling points from 12 channels to 64 channels. The instrument can be applied to small flow gas sampling and high temperature gas working conditions. Configuration and control are carried out by the application software on Win-PC, and data are automatically stored in Excel format. Standard digital or analog output is realized through different interfaces. At the same time of 64 channels of simultaneous sampling, 64 channels of temperature sensor and pressure sensor can be connected to the multi-point sampling unit to measure the sampling gas temperature, air temperature, surface temperature, working temperature and pressure of the multi-point sampling unit.
The Coal Spontaneous Combustion Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.The system analysis host is based on infrared spectroscopy technology, has pulse infrared light source, and forms 10 spectral bands in mid-infrared region through narrow-band optical filter for gas analysis; Ultra-high sensitivity patented optical microphone technology with enhanced beam can be realized through 10 narrow-band optical filters, and ultra-narrow optical filter can remove the interference of background gas; Multi-spectral region can help to minimize the cross sensitivity. It can measure up to 9 kinds of gases at the same time.
The Coal Spontaneous Combustion Underground Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.The system analysis host is based on infrared spectroscopy technology, has pulse infrared light source, and forms 10 spectral bands in mid-infrared region through narrow-band optical filter for gas analysis; ultra-high sensitivity patented optical technology with enhanced beam can be realized through 10 narrow-band optical filters, and ultra-narrow optical filter can remove the interference of background gas; Multi-spectral region can help to minimize the cross sensitivity. It can measure up to 9 kinds of gases at the same time. Multi-point sampler can freely expand gas sampling points from 12 channels to 64 channels. The instrument can be applied to small flow gas sampling and high temperature gas working conditions. Configuration and control are carried out by the application software on Win-PC, and data are automatically stored in Excel format. Standard digital or analog output is realized through different interfaces. At the same time of 64 channels of simultaneous sampling, 64 channels of temperature sensor and pressure sensor can be connected to the multi-point sampling unit to measure the sampling gas temperature, air temperature, surface temperature, working temperature and pressure of the multi-point sampling unit.
The Coal Spontaneous Combustion Monitoring System of Duketech is used to monitor the gas content of O2, N2, H2, He,CO, CO2, CH4, C2H4, C2H6, C2H2,H2S,SO2,temperature, pressure, and so on. The regularity of formation of multi-component index gases during spontaneous combustion of coal is detected, which provides technical support and theoretical support for the identification of early hidden danger characteristic information of spontaneous combustion of coal.The system analysis host is based on infrared spectroscopy technology, has pulse infrared light source, and forms 10 spectral bands in mid-infrared region through narrow-band optical filter for gas analysis; Ultra-high sensitivity patented optical microphone technology with enhanced beam can be realized through 10 narrow-band optical filters, and ultra-narrow optical filter can remove the interference of background gas; Multi-spectral region can help to minimize the cross sensitivity. It can measure up to 9 kinds of gases at the same time.
Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container
Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Specifications: 12 LED Touch Screen 16:9, suitable for bedside, operation room, ICU, etc. Various display screen : Trend Coexist Display, OxyCRG Dynamic View Display, Bed to Bed view Display Arrhythmia Analysis, Multi-Lead ECG Waveforms Display in Phase, Real time S-T segment analysis, pacemaker detection Drug calculation and titration table. 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Can be used to monitor adult, pediatric & neonate patient and Low perfusion working possible. Advanced streamline outline design, compact, lightweight, in-built handle makes it truly portable. Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse
Mowell Touch Screen Patient Monitor System with 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Specifications: 12? LED Touch Screen 16:9, suitable for bedside, operation room, ICU, etc. Various display screen : Trend Coexist Display, OxyCRG Dynamic View Display, Bed to Bed view Display Arrhythmia Analysis, Multi-Lead ECG Waveforms Display in Phase, Real time S-T segment analysis, pacemaker detection Drug calculation and titration table. 5 Parameters SpO2, ECG, NIBP, Temperature and Pulse Can be used to monitor adult, pediatric & neonate patient and Low perfusion working possible. Advanced streamline outline design, compact, lightweight, in-built handle makes it truly portable.
Color Black or brown, varying shades Texture Can be smooth, granular, or banded Hardness Soft to hard, depending on coal type Luster Dull to shiny Density Varies depending on coal type, typically around 1.2-1.5 g/cm�³ Porosity Varies, can be porous Composition Mainly composed of carbon, along with hydrogen, sulfur, oxygen, and trace minerals Moisture Content Can range from a few percent to over 30% Volatile Matter Varies, typically 20-45% Fixed Carbon Varies, typically 40-90% Ash Content Varies, typically 3-30% Heating Value (BTU/lb) Varies depending on coal type, typically 8,000-14,000 BTU/lb Heating Value (MJ/kg) Varies depending on coal type, typically 24-33 MJ/kg Combustion Characteristics Burns to release heat, producing carbon dioxide and other gases
High quality Australian Coal for export worldwide. Australian coal is renowned for its high quality and favorable characteristics, making it a sought-after commodity on the global market. The coal extracted from Australian mines is known for its low impurity content, high energy yield, and efficient combustion properties. The country's coal reserves include both metallurgical coal, essential for steel production, and thermal coal, widely used in electricity generation. The consistency in quality, coupled with advanced mining practices and stringent environmental standards, positions Australian coal as a reliable and environmentally responsible choice for various industries worldwide. Australia's commitment to sustainable mining practices further enhances the appeal of its coal as a dependable energy and industrial resource on the international stage.
Our RB4 Steam Coal is a high-quality thermal coal that meets the Standard Coal Trading Agreement (SCoTA) specifications. With a calorific value of 5000 Kcal/kg (net as received), this grade of coal is ideal for power generation and industrial applications that require reliable and efficient energy sources. Key Features: 1. Calorific Value: 5000 Kcal/kg (net as received), providing a balanced energy output suitable for various applications. 2. Compliance: Meets the stringent SCoTA specifications, ensuring consistent quality and performance. 3. Moisture Content: Low moisture content enhances combustion efficiency and reduces transportation costs. 4. Ash Content: Controlled ash levels help minimize slagging and fouling in boilers, contributing to more efficient operations. 5. Sulfur Content: Low sulfur content ensures compliance with environmental regulations, reducing emissions and the environmental impact of coal usage. Applications: 1. Power Generation: Ideal for thermal power plants, RB4 coal offers a reliable energy source for electricity production. 2. Industrial Use: Suitable for cement manufacturing, steel production, and other industrial processes requiring consistent thermal energy. 3. Heating: Can be used in industrial boilers and heating systems where a steady and efficient fuel supply is needed.
"Our RB3 coal meets the rigorous standards set by the Standard Coal Trading Agreement (SCoTA), ensuring high-quality thermal coal for various industrial applications. This coal grade is specifically tailored to meet the needs of power generation and other industrial processes requiring consistent and reliable fuel. Key Features: 1. High Calorific Value: RB3 coal provides a substantial calorific value, ensuring efficient energy production. 2. Consistent Quality: Adheres to SCoTA specifications, guaranteeing uniformity and reliability in every shipment. 3. Low Moisture Content: Reduced moisture content enhances combustion efficiency and reduces transportation costs. 4. Sulfur and Ash Content: Balanced levels of sulfur and ash to meet environmental standards and reduce emissions. Applications: 1. Power Generation: Ideal for use in thermal power plants, RB3 coal ensures efficient and stable electricity production. 2. Industrial Processes: Suitable for various industrial applications, including cement manufacturing, steel production, and other high-energy-demand industries. 3. Domestic Heating: Can be used for residential heating purposes, providing a reliable and cost-effective energy source."
Anthracite is the highest rank coal and is characterized buy low volatile matter (always less than 10%) and high carbon content. It has a semi- metallic luster and is capable of burning without smoke. Semi- anthracite is coal midway between low volatile bituminous coal and anthracite. (1-6 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 3 % Moisture no more than 9.5 % Lowest heat of combustion (GCF) at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % (0.2-1 �?�?) Ash content for dry condition no more than 30 % Volatile substances no more than 6 % Moisture no more than 10 % Lowest heat of combustion at least 5,000 kcal/kg Total sulfur for dry condition no more than 1 % (6-13 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 4 % Moisture no more than 8 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 18 % (13-25 �?�?) Ash content for dry condition no more than 5 % Volatile substances no more than 3.5 % Moisture no more than 6.5 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 17 %
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
