POPULA fiberglass centrifugal fan GF4-72 A motor directly connected to FRP material Product Introduction: The GF4-72 Type A fiberglass centrifugal fan is a high-efficiency, high-performance, low energy consumption and environmentally friendly fan designed and improved by our company on the basis of the original 4-72 fan. This model has a more suitable appearance for gas flow performance. The GF4-72 fiberglass centrifugal fan is designed and improved based on the performance parameters of the metal 4-72 fan, and is made of fiberglass composite material. This series of fans can transport corrosive gases containing acid, alkali and chemical components. The transported gas is not allowed to contain viscous substances, dust and hard particles â?¤ 150mg/m�³, gas temperature â?¤ 60 â??, and relative humidity â?¤ 100%. This series of fans has the characteristics of high strength, light weight, non aging, good corrosion resistance, low noise, and smooth operation. It is a high-efficiency, high-performance, and low energy consumption universal anti-corrosion fan. This series of fans is widely used in chemical, electroplating, oxidation, power plants, laboratories, circuit boards, environmental protection equipment and other places containing corrosive gases. GBF4-72 fiberglass explosion-proof centrifugal fan is made by configuring EXdl or EXdl Class A/B explosion-proof isolation type motors according to customer usage conditions. It can transport flammable and explosive volatile gases such as methane, ethane, propane, styrene, toluene, xylene, carbon monoxide, acetic acid, kerosene, gasoline, furan, etc. Its performance parameters and installation dimensions are consistent with the GF4-72 fiberglass centrifugal fan. PRODUCTS INFO: Type:POPULA Fiberglass centrifugal fan GF4-72 A Brand:POPULA Electric Current:AC Power:0.75-15 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:580-21510 CMH Air Pressure:230~3180 Pa Speed:960-2900 rpm Max Noise:
POPULA FGXF series fiberglass reinforced plastic/PP diagonal flow ventilation fan Puduct introduce: FGXF type fiberglass/polypropylene inclined flow fan is a drum structure, its small inlet and outlet characteristics accelerate the airflow speed, high pressure coefficient. In the case of the same model as the general axial fan, its flow rate and pressure are greater than that of the axial fan. This series of fans replace low-pressure fans, energy saving investment and footprint, simplified design, safe installation, in the axial fan pressure can not meet the pipeline ventilation occasions, the use of oblique flow fan is the best choice. It has the characteristics of light weight, good corrosion resistance, not easy to age and low noise. It is widely used in industrial and mining enterprises, hotels, museums, gymnasiums, chemical industries, laboratories, environmental protection facilities, and other places for pipeline pressure and exhaust air use. The conveyed gas is not allowed to contain viscous substances, dust and hard particles of the conveyed gas
POPULA PP4-72 Polypropylene Centrifugal Fan Product Introduction: The PP4-72 polyvinyl chloride centrifugal fan is made of hard polyvinyl chloride plate and welded by heating and pressing according to the performance parameters of metal 4-62. It is widely used in industries such as scientific research, chemical industry, metallurgy, electronics, medicine, textile, instrument, electroplating, mining, schools, hotels, hotels, laboratories, environmental protection supporting equipment, etc. for ventilation and exhaust of harmful gases such as acid and alkali. However, it is not allowed to transport corrosive gases such as halogen derivatives, ketones, etc. containing aromatic compounds, aliphatic compounds, and aromatic hydrocarbons. It has the characteristics of chemical corrosion resistance, low aging resistance, small specific gravity, low mechanical vibration, low noise, and smooth operation. The gas it transports is not allowed to contain dust and hard particles containing viscous substances 150mg/m , gas temperature 0C, relative humidity 100%. PRODUCTS INFO: Type:POPULA Fiberglass centrifugal fan PP4-72 Brand:POPULA Electric Current:AC Power:0.75~7.5 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:565-19083 CMH Air Pressure:126~1550 Pa Speed:960~1450 rpm Max Noise:
POPULA Fan Smoke Exhaust Pipeline Centrifugal Fan Ventilation Industry 4-72 C Series Centrifugal Fan PRODUCTS INFO: Type:POPULA Pipeline Centrifugal Fan 4-72 C Brand:POPULA Electric Current:AC Power:1.1-110 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:3684~107124 CMH Air Pressure:220~3020 Pa Speed:355-2240 rpm Max Noise:
Type:POPULA Pipeline Centrifugal Fan 4-72 B Brand:POPULA Electric Current:AC Power:11-200 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:35985~221730 CMH Air Pressure:299~3157 Pa Speed:250~900 rpm Max Noise:
PRODUCTS INFO: Type:POPULA Ventilation Industry 4-72 A Series Centrifugal Fan Brand:POPULA Electric Current:AC Power:0.75-22 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:688~25736 CMH Air Pressure:102-4152 Pa Speed:960-2930 rpm Max Noise:
Foshan POPULA Fan C6-46 A Dust Removal Centrifugal Fan Low Noise Ventilation and Ventilation Product Introduction: It is suitable to expel air with dirt , wood scraps and fine fiber . It can also be used for ventilation with the temperature of air below 80â??.Made up of 6 forward curved blades , the fan is not easy to wear and amass dirt . This series consist of A drive type , C drive type as well as D drive type. PRODUCTS INFO: Type:POPULA dust removal centrifugal fan C6-46 A Brand:POPULA Electric Current:AC Power: 2.2~7.5 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:1183-11552 CMH Air Pressure:568-1607 Pa Speed:960-2900 rpm Max Noise:
POPULA Fan HCF Centrifugal Fan I A Single Board Rear Tilting Kitchen Oil Smoke Exhaust Hotel Oil Smoke Exhaust Product Introduction: Impeller : Backward single-platemoeller . Convenient for clean.Noise : 10% lower than similarfans . Suitable Air : Non-hypergolicnon-corrosive , dustinesss 120mg /m�³ -20c < air temperature < 85â??.Application : Suitable for kitchen lampblack exhausting and using with smoke purifier. PRODUCTS INFO: Type:POPULA Single Board Rear Tilting centrifugal fan HCF-I A Brand:POPULA Electric Current:AC Power:0.75-30 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:1876~51494 CMH Air Pressure:201-4301 Pa Speed:720-2900 rpm Max Noise:
POPULA New 9-19 High Pressure Centrifugal Fan Product Introduction: This series are use for coercive ventilation in industries such as Ancient furnace , glass , electroplating , ceramics , etc , and are widely used formaterial transportation in processing Industries like food , Feed and slag .The transporting medium is air or other non-spontaneous-combustion and non-explosive-combustion air with no harm to human . The air transferred shall not contain any adhesive material , dust and grain and the concentration shall not exceed 150mg /m�³ , with the temperature no higher than 80â??. PRODUCTS INFO: Type:POPULA High pressure Industrial centrifugal fan 9-19 NEW Brand:POPULA Electric Current:AC Power:7.5~110 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:2305~28078 CMH Air Pressure:2561~11717 Pa Speed:960~2970 rpm Max Noise:
POPULA Fan C6-48C Dust Removal Centrifugal Fan Industrial Exhaust Fan It is suitable to expel air with dirt , wood scraps and fine fiber . It can also be used for ventilation with the temperature of air below 80â?? There are A motor directly driven type , C belt driven type and D drive type with coupling , users can choose from different driven types according to their needs . PRODUCTS INFO: Type:POPULA dust removal centrifugal fan C6-48 C Brand:POPULA Electric Current:AC Power:0.75-37 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:755~56902 CMH Air Pressure:344-2043 Pa Speed:500-3150 rpm Max Noise:
POPULA Fan 9-14 High pressure blower volute type centrifugal fan Forging furnace material conveying fan Product Introduction: 9-14 ( A ) type is suitable for furnace and coercive ventilation , and is widely use to transport air as well as materials . The ain transferred shall not contain any corrosive , not spontaneous combustion and adhesive material , dust and grain and the concentration shall rotexceed 150mg /m�³ , with the temperature no higher than 80â??. PRODUCTS INFO: Type:POPULA High pressure Industrial centrifugal fan 9-14 Brand:POPULA Electric Current:AC Power:11~15 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:2167~5500 CMH Air Pressure:4767~8213 Pa Speed:2930 rpm Max Noise:
POPULA Fan Steam Boiler Induced Draft Y9-38D Boiler Centrifugal Induced Draft Fan Product Introduction: It is designed to fit the equipment of 0.5-35t industries boiler which equipped with preheated and dust-removal fixture , suitable for the industrial boiler with the similar suction condition and the compatible performance . But the temperature of air must be below 250â??. Before installation . the fan must equip with the dust-removal fixture whose dust removing efficiency shall not beneath 85% .With access 1o lower the amount of dust in the flue gas,the far will reduce environmental pollution .Moreover , it can reduce wear so as to enhance the service life of the fan. PRODUCTS INFO: Type:POPULA Boiler centrifugal induced draft fan Y9-38 Brand:POPULA Electric Current:AC Power:5.5~315 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:3297~139712 CMH Air Pressure:1402~5805 Pa Speed:730-2900 rpm Max Noise:
POPULA Fan Centrifugal Heat Dissipation Y5-48C Boiler Centrifugal Induced Draft Fan Product Introduction: It is designed to fit the equipment of 1-20t/h industries boiler and civil boiler of which equipped with the dust-removal fixture.Before installation , the fan must equip with the dust-removal fixture whose dust removing efficiency shall not beneath 85% . The temperature of air must be below 250 Our company can provide the stainless steel heat boiler centrifugal blower , when the temperature of air must exceed 250 PRODUCTS INFO: Type:POPULA Boiler centrifugal induced draft fan Y5-48 Brand:POPULA Electric Current:AC Power:3-110 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:2065~67803 CMH Air Pressure:1097-4483 Pa Speed:1000-3550 rpm Max Noise:
POPULA Ventilator Glass Ceramic Industry High Pressure Conveying Fan 9-26 A High Pressure Centrifugal Fan Product Introduction: This series are use for coercive ventilation in industries such as Ancient furnace , glass , electroplating , ceramics , etc , and are widely used formaterial transportation in processing Industries like food , Feed and slag.The transporting medium is air or other non-spontaneous-combustion and non-explosive - combustion air with no harm to human . The air transferredshall not contain any adhesive material , dust and grain and theconcentration shall not exceed 150mg /m�³ , with the temperature no higherthan 80â??. PRODUCTS INFO: Type:POPULA High pressure Industrial centrifugal fan 9-26 Brand:POPULA Electric Current:AC Power:3~500 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:1473~81496 CMH Air Pressure:1060-16250 Pa Speed:980-2980 rpm Max Noise:
POPULA multi wing centrifugal fan CF A volute hotel restaurant smoke exhaust fan matching Product Introduction: CF ( A ) series adopt the centrifugal structure Featured by electricity-saving , argevolume , low noise and long service life , the series are suitable for ventilation and air-extraction in places like hotels and restaurants , kitchens , mineral factory and the public. PRODUCTS INFO: Type:POPULA multi wing centrifugal fan CF A Brand:POPULA Electric Current:AC Power:0.37-4 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:650~6500 CMH Air Pressure:210~1542 Pa Speed:910-2800 rpm Max Noise:
DF-2.25A POPULA Multi airfoil Centrifugal Fan Power 2.2KW Air Volume 2626CMH Air Pressure 1564PA Product Introduction: The fan series adopts a single inlet form, and the impeller adopts a multi wing centrifugal design. It is widely used in industries such as electronics and electronics, power and telecommunications, and is particularly suitable for cooling plastic machinery, printing machinery, printing machines, drying machines, and blow molding machines. The temperature control and ventilation function of the conveying gas does not contain flammable, explosive, or corrosive gases, and its temperature should not exceed 60 �° C. PRODUCTS INFO: Type:POPULA Multi airfoil Centrifugal Fan DF Brand:POPULA Electric Current:AC Power:2.2kw Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:1940-2626CMH Air Pressure:1564-1536Pa Speed:2800 rpm Max Noise:
STRONBULL 4-72 industrial centrifugal fan 3 Phase carbon steel air exhausting blower fan PRODUCTS INFO: Type:STRONBULL industrial centrifugal fan 4-72 Brand:STRONBULL Electric Current:AC Power:0.75-220kw Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:688-107124M3/h Air Pressure:1210 - 3131 Pa Speed:960r/min ,1450r/min,2960r/min Max Noise:
POPULA Ventilation Fan DT Single Speed Cabinet Centrifugal Ventilation Box Type Low Noise Restaurant Kitchen Smoke Exhaust Product Introduction: DT series low noise centrifugal fan has the benefits of high efficiency ,low noise , novel compact structure . small vibration light weight , easy maintenance and install etcIt can be widely used inhotelsrestaurantscinemas , halls , miningindustries , building to exhaust the air or exhaust the Iampbiack . The air transferred shall not containany adhesive material , dust and grain and the concentration shall not exceed 50mg/m�³ , with the temperature no higher than 80â??. PRODUCTS INFO: Type:POPULA Single speed cabinet centrifugal fan DT-I Brand:POPULA Electric Current:AC Power:0.55-45 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:1328~89278 CMH Air Pressure:151~1054 Pa Speed:350-1400 rpm Max Noise:
Blower and industrial fan.
POPULA fan CZY low noise medium pressure ventilation fan blower hot air fan medium pressure supply air Product Introduction: CZ series adopt the centrifugal structure , Classified by outer casing and impeller ,the series can be divided into two types . CZ aluminum alloy type and CZ-T rolling plate stamping type Featured by light weight , new pattern , large air flow and lonoise . this series are used in some industrial devices to blow air such as smelting,diesel vaporization heater matching , kitchen equipment , pneumatic compression facilities , industrial boilers , plastics machinery. PRODUCTS INFO: Type:POPULA Energy saving low noise medium pressure ventilation fan CZY Brand:POPULA Electric Current:AC Power:0.18-3 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:408~1620 CMH Air Pressure:1100~2650 Pa Speed:2800-2900 rpm Max Noise:
