Over 40 kind of jaggery items, , , and 50 types of spicy items. 1 packet, 200grams, 12cm x 15cm
Jaggery, snacks, sweets.
WDM-PON can mix 1625nm or 1650nm of OTDR’s operating light and 1310nm/1490nm/1550nm of communication light into one optical fiber cable in PON network cable monitoring system. Communication light and test light are transmitted in one fiber, which can not only monitor the quality of transmission line and also need not to use another line to test. In that case, optical fiber path resource is saved.
Brief introduction: St805 pon power meter is specially designed for pon network construction and maintenance which can be connected between olt nad ont. The voice, data, video signal online can be measured and displayed synchronously with this meter. Key features 1. Test the three wavelength of the pon network synchronously: 1490nm, 1550nm, 1310nm 2. Can test the burst mode signal of 1310nm 3. Can set the threshold value, upload data, calibrate the wavelength through management software. 4. Can save 1000 records and upload the records to the management software 5. Supply 10 groups threshold values 6. En menu display 7. Auto shut off backlit 8. Real-time display Technical specifications Standard wavelength: 1310(up); 1490(down);1550(down) Pasband(nm):1260f+1360; 1470f+1505; 1535f+1570 Range(dbm): -40f++10; -40f++10; -40f++20 Isolation.1310nm++db++: ; >40; >40 Isolation.1490nm++db++: ; >40; >30 Isolation.1550nm++db++: ; >40; >40 Accuracy: Uncertainty++db++:F+0.5 Polarization relevant loss(db++:
SM OTDR Optical Time Domain Reflectometer, Model# FHO5000-D35 - SM OTDR - 7'' High Resolution Screen - Wavelengths: 1310/1550nm - Dynamic Range:35/33dB - Event/ Attenuation Dead zone: 1M/ 4M - Selectable Distance (Km): 4m-240km - Print Report easily - Connect to your computer with a cable - Real time & Averaging testing mode - With .sor software & A->B, B->A analysis software - Free updating software - With Black Carrying bag Specification: OTDR (MODEL# FHO5000-D35) General Parameters Testing Wavelength 1310/1550nm Dynamic Range 35/33dB Event Dead Zone 0.8m Attenuation Dead Zone 4m Pulse Width 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1µs, 2µs, 5µs, 10µs ,20us Testing Range Dead zone, 500m, 2km, 5km, 10km, 40km, 80km, 120km, 160km, 240km Sampling Resolution Minimum 0.25m Linearity = 0.05dB/dB Display Resolution 0.01dB Loss Threshold Step 0.01dB Loss Resolution 0.001dB Distance Resolution 0.01m Sampling Point Maximum 128,000 points Distance Accuracy ± (1m+measuring distance×3×10-5+sampling resolution) Data Storage 40000 groups of curve Internal VFL Parameter Laser Launcher Type LD Output Power 10mW Distance Range About 12km Optical Connector FC/UPC Output Wavelength 650nm ± 10nm Modulation Frequency CW / 2Hz Physical Parameters Interface Internet port, 3 USB port Display 7 inch TFT-LCD Screen Battery 7.4V/4.4Ah lithium battery, continuous 5.5 hours Working Temp -10°C~+50°C Storage Temp -20°C~+75°C Dimension 253×168×73.5mm / 1.5kg Accessories Standard Accessories 1* FHO5000 1* Quick guide 1* USB cord 1* 12V AC/DC adapter 1* Battery 1* Software CD 1* FC adapter 1* Carrying case
.PON design and construction, PON maintenance and services, FTTx ODN distribution solution, Optical component inspection
Beautiful Copper Cake Tray Measurement - Dia - 4 inches, H- 15 inches, Free Shipping within India (Upto 5 Kg ) Domestic Delivery : 12-15 Days International Delivery: 4-6 Weeks Creating and Packing Options Available (Extra Charges Apply) and are mandatory for "Fragile / Breakable Items". *Please Note: Estimated delivery time for International Delivery of Lights, Furniture, Interior Solutions and Bridal Registry Products will be 6-8 Weeks.
Model PON power meter 1310nm 1490nm 1550nm Pass Zone(nm) 12601360 14701505 15351570 Isolation (dB) >40@1490 >30@1310 >40@1310 Isolation(dB) >40@1550 >40@1550 >40@1490 Measurement Range(dBm) -40+10 -40+10 -40+20 Measurement Accuracy Connatural uncertainty(dB) ±0.5 Linearity(dB) ±0.1 Passing through insertion Loss(dB)
l With 4 PON ports or 8PON ports. l Support 256/512 ONUs (1:64 splitting retio, 10km transmission distance). l Provide 8GE uplink ports and and 8 SFP Combo ports. l L2 full-line-speed ability l MAC address table: 16K l VLAN support: 4096 l ONU auto find and auto register. l Support dynamic bandwidth distribution. l Support online upgrade and batch upgrade l Support in-band and out-of-band management interface l Support CLI, TELNET,EMS management mode. l Support dual-redundancy
Product features: Highly reliable case, strong adaptive capacity to environment 1u case, good shielding measures. Layer 2 aggregation switching Layer 2 wire-speed forwarding; support rich layer 2 protocols 4k mac address list Uplink port supports electronic port modules and optical port modules, which can be configured flexibly as required Perfect network management function Support gui based graphical interface¡¡ê Support in-band management, out-of-band management Support online upgrade of device software Strong qos function Support flexible dba, uplink and downlink traffic rate-limited Support ip tos, ieee802.1p Port based traffic control, traffic shaping¡¡ê Supports up to 256 llid. Rich oam function Support onu automatic identification, automatic finding, and automatic registration Support the function of automatic loop back test to single link Strong vlan function, including vlan stacking, trunk, translation Support flexible controllable multicasting, support igmp snooping Port features: 1 pon ports (1.25g) 1 uplink ports (1g) (electronic ports and optical ports options) 1 management ports (special software management) 1 console port Physical features:
Short Description: EPON OLT is high integration and medium capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, a complete software function, efficient bandwidth utilization and Ethernet business supportability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. Product Overview: EPON OLT is high integration and medium capacity cassette EPON OLT designed for operators access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, a complete software function, efficient bandwidth utilization and Ethernet business supportability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. There are two kinds of specifications OLT. The OLT provides 4/8 downlink 1.25G EPON ports, 8 * GE LAN Ethernet ports and 4 *10G SFP for uplink. The height is only 1U for easy installation and space-saving. It adopts advanced technology, offering an efficient EPON solution. Moreover, it saves a lot of cost for operators for it can support different ONU hybrid networking.
Short Description: 1G XPON ONU series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by HDV, The carrier-class FTTH application provides data service access. 1G XPON ONU series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT. 1G XPON ONU series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X 1G XPON ONU series is designed by Realtek chipset 9603C Functional Feature Support EPON and GPON Mode, and switch mode automatically Support ONU auto-discovery/Link detection/remote upgrade of software WAN connections support Route and Bridge mode Route mode supports PPPoE/DHCP/ static IP Support WIFI Interface and multiple SSID Support QoS and DBA Support port Isolation and port vlan configuration Support Firewall function and IGMP snooping multicast feature Support LAN IP and DHCP Server configuration Support Port Forwarding and Loop-Detect Support TR069 remote configuration and maintenance Support CATV interface for Video Service Support POTS interface for Voip Service Specialized design for system breakdown prevention to maintain stable system
OLT 1U Standalone EPON 4 PON Ports + 4 GE uplink optic ports(SFP)/4 GE uplink UTP ports + 2 10GE uplink optic ports(SFP+) Commercial Temperature , Dual 220V AC Power supply 1 USB interface
Short Description: Model Number: HUR2201XR Application: FTTH FTTB FTTX Network Transmission Distance: 20km PON Interface: 1 GPON BOB Class B+/Class C+ Wavelength: Tx1310nm/Rx1490nm LAN Interface: 1 x 10/100/1000Mbps(GE) and 1 x 10/100Mbps(FE) Optical Interface: SC/UPC connector Single Fiber Power Consumption: â?¤6W DC power supply: 12V 1A Certification: RoHS/CE/ISO9001 Warranty: 1 Year Type: FTTH Solutions Product Description 1. Overview * HUR2201XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * HUR2201XR is based on mature and stable, cost-effective XPON technology. * HUR2201XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X. 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI and 2*2 MIMO * Support SIP Proctolfor Voip Service * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system
PLC technology Low insertion loss, low PDL and small uniformity High temperature range Excellent environmental stability Small design with up to 64 outputs Applications: Passive optical networks (B-PON, G-PON, E-PON) Digital, hybrid and AM-Video system CATV networks and data communications Fiber optic equipments and systems.
Fancy yarn series : Pon-Pon yarn, Fishnet yarn, Mesh yarn, Ladder yarn, Lily yarn(hollow tube yarn), Track yarn, Eyelash yarn, Feather yarn, Boucle yarn, Loop yarn, Tape yarn, Slub yarn, Knot yarn, T/T yarn, PP yarn, Brushed yarn,8-like yarn, toothbrush yarn, Butterfly yarn and so on
Kaolin, clay.
Place of Origin:Guangdong, China (Mainland) Brand Name:Fiber home Model Number:AN5516-04, 2 Pon 4 Pon Gpon OLT, Mini size C+ C++ Module AN5516-04 OLT For Sale Uplink:HSUA/HUSB/HUSC Working voltage:DC48V or DC+AC Application::FTTH FTTX Network Support:Gpon/Epon service slot:2 Warranty:1 Year Operating humidity:5%RH~95%RH Dimensions (W x D x H):65*45*24cm Servie:EPON/GPON/10G PON/P2P
Features Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto check quality of , cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Specifications ModelKl-280 Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µ,m) 16mm(coating diameter: 250 ~ 1000µ,m) Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm Fiber countSingle Fiber aligning method Core , aligning Return loss>60db Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds) Splicing modeAuto Splicing mode12(templet), 188(user) Typical splicing timeTypical 9 sec, with standard sm fiber Protection sleeve length60mm, 40mm and a series of micro sleeves Storage of splice result5000 results, 3 parameter per result Tension test2n Fiber display and magnification400x(x or y view), 200x(x and y view) Tube heating timeTypical 30 sec Electrode life2500 No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery Display screen5 inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsRs 232 Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x160mm (h) Weight3.52 kg including battery.
Vanille produce of madagascar and i have at the moment 5 tons, mesure:14 - 18 cm Emballage, this is a 5000kg, dimensions 14-18 cm
