Polyurethane Sealant Pu Sealant Suppliers and Manufacturers

LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. INSTRUCTIONS l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft, l Joint width/depth ratio should be 2:1 (Table 1), l If necessary, use back up material to adjust joint depth, l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate. STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C

Introduction: Homey p35 polyurethane sealant for construction,  is one-part room temperature moisture Curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant, Low,  temperature resistant and free-corrosive properties, is excellent where gap filling requirements are needed. Typical uses: , precast panel, wood, aluminium , pvc joinery seams , curtain wall, bakes clay and concrete roof tiles Cas no.:, 9009-54-5 Other names:, pu adhesive sealant Mf:, mixture Einecs no.:, 230-391-5 Place of origin:, china(mainland) Classification:, other adhesives Main raw material:, polyurethane Usage:, construction, woodworking, other Brand name:, homey Model number:, p35 Type:, polyurethane sealant Component:, one component Hs code:, 3506100010 Curing system:, moisture Volume:, 310ml Color:, white, grey, black Performance:, low temperature resistant, vibration ehaustion, anti-aging Oem:, available Price:, negotiable Shelf life:, 9months Storage:, store at 25, , or below Packaging details:, 310ml;24pcs/ctn 20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet

Product description One component polyurethane joint sealant is a durable elasticity moisture curing polyurethane polymer based road joint filling material. It is widely applied in filling road joints for the excellent properties and easy application Typical applications 1.Suitable for sealing and filling the expansion joints and settlement joints of airport runways, highways, building roofs, underground parking, storage yards, industrial floors, driveways, loading docks and basement. 2. Cracks maintenance for highways, plaza, roofs, bridges and epoxy floors etc. Key features 1.One component, easy to application, free solvent, non-toxic and odorless after curing, environment-friendly 2.Self-leveling, excellent flowability, easy to raked joint operation 3.Durable flexibility, no crack, excellent sealing and waterproofing properties 4. High movement, no cracking, no falling off, suitable for sealing jonts for all kind of concrete road 5. The new and used sealant have good compatibility, easy to repair 6.Excellent resistance to water, oil, acid, alkali and puncture Technical data table Property standard/unitsvalue Product item ----- pu820 , Appearancevisual inspectiongray, homogeneous paste , Density g/m3 1.35â±0.1 Flow ability mmself-leveling , Solid content %98 , Surface dry timehour â?¤4 , Tack free time hour 6~16 , Fully cured timehour 24

Characteristics: Homey 860, is a one-part, neutral cure, multi-purpose silicone sealant formulated for trades/tradesman, domestics and decoration usages. Typical uses: a) glass, aluminium, ceramics, titles, metal & steel, fibre glass, most plastics, stone, porous & non-porous substrates. b) for glazing glass & mirror, window & doors, facade panels and waterproofing Cas no.:, 9009-54-5 Other names:, silicone sealant Mf:, mixture Einecs no.:, 230-391-5 Place of origin:, china(mainland) Classification:, other adhesives Main raw material:, silicone Usage:, construction, woodworking, glazing glass, glass, mirror, window Brand name:, homey Model number:, 860 Type:, silicone sealant Component:, one component Hs code:, 3506100010 Curing system:, neutral cure Volume:, 280ml Color:, translucent, white, grey, bronze, black Fire retardant grade:, grade b2 Performance:, waterproof, weatherproof, anti-aging Oem:, available Price:, negotiable Shelf life:, 12months Storage:, store at 25, , or below Packaging details:, 280ml, 300ml;24pcs/ctn 20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet

Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.

Silicone sealant, polyurethane foam, PU sealant, acrylic sealant, MS polymer.

Anti-fungal GP silicone sealant bathroom using silicone sealant is a one part, fast curing and permanently flexible silicone sealant; it has excellent waterproof performance, the sealant also is also a type of anti-fungal able to use in bathroom and kitchens. It has excellent tensile and compression restoring ability. It has strong adhesion to glass, PVC, ceramic, concrete, wood, metal, tiles, vinyl and most building material. Use: For sealing, repairing, glazing and mending of bathtubs, shower stalls, bathroom vanities, kitchen counters, aquarium, auto windscreen, glazing for window panels, wood or metal frameworks bonding, sealing air-conditioning systems, draught proofing, skylights, port lights, back lights etc.

Neutral Silicone Sealant, Acetic Silicone Sealant, Polyurethane Sealant,PU Foam Sealant And Acrylic Sealant.

Acetic gp silicone sealant is one-part room temperature acetoxy silicone sealant. It has excellent weather ability, waterproof and good adhesion to most construction materials. It is suitable for sealing, repairing, glazing and mending of glass, auto windscreen, glazing for window panels and other general building materials bonding. -

Product description: Large expansion Pu foam sealant is an one-component,self-expanding,multipurpose polyurethane foam.This foam will expand and cure by moisture in the air.It is used for a wide range of building applications.It is very good for filling and sealing with excellent mounting capacities,high thermal and acoustical indulation.Higher expansion rate than normal Pu foam. Advabtage: (1)Can apply around 70 meters(30mm*15mm). (2)Most cost effective for each window or door. (3)No shrinkage and craking after cured. (4)Better adhesion and harder. Construction guide: (1)Shake can vigorously for one minute before use. (2)Clean and pre-moisten surface before use. (3)Firmly screw can on adapter,and turn the flow adjustment screw anticlockwise. (4)Fill vertical joints from the bottom up whenhalf filled enough. (5)Foam begins to cureabout ten minutes,wait for one hour before doing the next step. (6)Use knife to smooth out cured foam and treat surface with cement paint or silicone. Usage scenario: Wide range of applications,including:mounting,sealing,filling and onsulating General purpose one-compoent polyurethane foam suitable for filling,insulating,sealing,mounting,caulking,stopping and soundproffing of large and small holes in cocrete,plaster,brick,floorboards,glass or wood.It is specially recommended for mounting of windows and doorframes,heat insulation of sewerage and central heating,fixing and isolating of wall panels and more ecification.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Adhesives & sealants: polyurethane (pu) sealants, acrylic sealant, silicone sealants, rtv gasket maker, ms polymer sealant.

It is a one-part polyurethane product formulated by Gorcci International. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.

Polyurethane sealant, construction joint sealant, pu sealant for auto glass replacement, pu adhesives for floor, polyurethane waterproof coatings.Producer and exporter

Silicon sealant for doors, windows, glass partitions and cubicles

It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.

SEP-9200 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer.It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature.Usually not need a primer before apply. It could adapt to thermal expansion and contraction due to inherent elasticity,It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.It has following characteristics: Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt substrate. Good adhesive for variety materials, such as concrete, cement, stone, glass,etc. Excellent weather resistance Paintable

SEP-1900 is a one component sealant based on silane end-capped polyether, without solvent, free isocyanate, small organic silicon molecule and polymer.It is environmental friendly, low VOC, and would not dirt the substrate, which is curing by absorbing the moisture from air in the room temperature.It performs excellent bonding to variety of construction materials, such as concrete, cement, stone, glass, ABS, PC, etc., therefore it could be widely used in construction and infrastructure areas.It has following characteristics: ï??High transparency, would not turn yellow. ï??Good operability: one component, easy to apply. Environmental friendly: no solvent, low VOC, without dirt the substrate. Excellent adhesive: bond well to variety materials, such as concrete, cement, stone, glass, and other construction materials.

MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer. It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature. Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity, It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.