Polynum Ultra: Pure aluminum foil laminated with two layers of double polyethylene Big bubbles (8mm each layer, Fire Retardant) and internal reflection layer. The 16mm multi-foil/bubbles structure is laminated with two reflective aluminum layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our high resistance anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity, livestock buildings. Optional: 18 microns aluminum with bi-directional reinforced netting for extra strength. Polynum ULTRA Advantages: ***** HighThermal resistance (R-value 3.72) ***** Lightweight- therefore easy to apply * High performance * Moisture-proof, fungus, and mold-free ***** Does not attract nesting, rodents, birds, or pests* * Does not collect dust, does not retain bacteria, odors nor dirt. ***** Friendly User & Safe: No protective equipment such as gloves or breathing equipment is required for installation ****Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Cost Effective
Polynum Big: Thermal Reflective insulation 8.00mm thick consists of a polyethylene bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum BIG Advantages: **** High Thermal resistance (R-value) **** Moisture-proof, fungus and mold-free **** High performance **** Does not attract nesting, rodents, birds, or pests. ****Does not collect dust, does not retain bacteria, odors nor dirt. **** Lightweight **** User-friendly No protective equipment such as gloves or breathing equipment is required for installation **** Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Eco Friendly Polynum Big Applications : Thermal insulation in industrialized roofs according to the existing construction Thermal insulation in tiled roofs combined with a dust barrier Thermal insulation in walls with two layers; gypsum finish, board cement, plasterboard, etc.
Polynum Super: Thermal Reflective insulation 4.00mm thick consists of a polyethylene small air bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum SUPER applications: * Polynum Super allows insulation to be installed on an industrial roof, tiled roof, double brick walls, and inside gypsum walls, cement boards, and more. * Allows a solution as vapor barriers on flat roofs or as reflectors under underfloor heating and a unique solution for acoustic and thermal insulation under the flooring. * Polynum Super is suitable for application in both new construction and renovations, building improvement, and home restoration. Cost-Effective Energy Saving Safe to Handle Easy to Install
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
Pig Iron for sale at high quantities from India. Payment Term - LC For price and specification. This Pig Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 300mm -1000mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 85 +/- 5% and P contents < 0.8% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
JH GLASS may offer high quality mirror products : **Silver mirror Thickness from 2-8mm Colour : bronze, grey, blue ,pink,green ,golden, ultra clear Size : 2140x3300mm/1830x2440mm,2440x3660mm Cut size available Advantage :high reflectance /lasting durability./ easy processing, **Aluminum mirror Thickness from1.8-6mm Colour :clear ,bronze, grey Size :2140x3300mm/1830x2440mm/1220x1830mm Cut size available Advantage : economical and practical / easy processing, **Copper free mirror Thickness : from 2-6mm Colour : clear,ultra clear Size :2140x3300mm,2440x3660mm Advantage : environment friendly / high reflectance /lasting durability./ easy processing, **Processed mirror pc film (CAT I) back mirror lattice film(CAT II) back of mirror , beveled edge mirror pencil ,flat polished edge mirror combined mirror
JHG solar glass including texture glass and flat glass, it is the nice performance low iron glass with high solar transmittance, and low reflection. After tempered, it will be the ideal choice for photovoltaics, solar thermal collector, and greenhouse. Size Maximum Size:1665*2200mm Minimum Size: 300*300mm Specifiction Main thickness  2-5mm Dimension tolerance ±1.0mm Thickness tolerance ±0.2mm Diagonal tolerance 0.2% Overall bow & 0.2% Iron content 110ppm Solar transmittance  from 91.5-99% (wavelength rang 380-1100mm) Hardness 4H
SOLAR GLASS JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection . After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse . Size Maximum Size:1665*2200mm Minimum Size: 300*300mm Specifiction Main thickness 2-5mm Dimension tolerance �?�±1.0mm Thickness tolerance �?�±0.2mm Diagonal tolerance 0.2% Overall bow
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3 Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits. We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains. These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Wollastonite Wollastonite is one of the most versatile minerals. It is a naturally found mineral that is a mixture of calcium, silicon and oxygen. However, it is majorly found in the regions of Rajasthan, Gujarat and some parts of Tamil Nadu in India The physical properties of Wollastonite include an eclectic needle looking structure which is high in brightness and has superior tones of white. It also has low moisture, oil-absorbing and high thermal stability with less solubility in water. It is low in volatility and has a high melting temperature. Wollastonite has medium hardness with rank of 4.5 on Mohâ??s scale. All of these properties make it an excellent and versatile mineral to be used in industries like plastics, paints, ceramics, construction and adhesives to mention a few. We have majorly focused our supply of Wollastonite mineral on its high-end applications in the ceramics, paints and plastics industries. Within the sphere of the plastics industry, it is a brilliant and less-expensive mineral substitute for fiberglass, carbon fiber and synthetic minerals. It is very much popular in automobile industries, as it can enhance the strength, dimensional stability, and influence resistance of car parts, aiding the manufacturers with lighter parts. Wollastonite is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium. It's often used in electronic equipment like connectors and computer housings because of its great insulating and fire-resistant qualities. Wollastonite mineral is customized to meet the needs of our clients' industries. Our wollastonite is anti-corrosion mineral that is ideal for paints and coatings sector. Wollastonite can improve the fire strength of ceramic tiles and sanitary ware, as well as reduce cracking and glazing faults, for ceramic manufacturers. Our Wollastonite is an excellent reinforcing filler for cement boards and fire-insulating boards in the building industry. Aryan Tiles is confident in the quality of its Wollastonite minerals. Wollastonite has proven to be the most adaptable material used in various key sectors, and the market for it is constantly expanding.
Features Of Graphite Powder Graphite Powder is our ultra-fine powder. Graphite powders are composed primarily of ultra-fine particles classified as per ultrafine size for various applications. It has 98-99% of Fixed Carbon content. It has self-lubricity and plasticity in high temperatures. Applications Drilling Conductive paints Electrically and thermally conductive coatings
This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
One-way mirror is a kind of high reflectance visble light glass,under the weak light environment ,can observed clearly has a strong ligh strong light sournce enbironment . One-way mirror widly be used for interrogation room, high-end bar, toilet , hospital ,outdoor ecological room,and other special places. One-way mirror can be edge grinded bent,tempered,laminated ,insulated.
Basic weight (g/m²) = 160 ± 10% Vapor resistance = excellent Tear resistance = good Packaging: 1.22m x 45m in roll form in pallet 1.22m x 60m in roll form in pallet
Uniform distance of Vertical lines(wide=3mm)obscure details, linear texture can keep space organized,.clean friendly. Patterned Glass is a kind of special processed translucent decorative glass with single-sided or double-sided embossed during the production. Its unique Decorativeness, which on one hand lets the light through fully, on the other hand, prevents the perspective effectively, creating an excellent appearance and hidden effects. Thickness:3mm 3.5mm 4mm 5mm 6mm Size: 1830x2440mm 2000x2440mm,2000x2800mm,2000x3300mm, max size 2134x3660mm
Bubble / Foam insulation provides the maximum efficiency in controlling heat transfer as the air space built between the layers of foil works to keep radiant heat from penetrating a structure from the outside, and the radiant foil reflects interior heat back into a structure from the inside. Even though you get single bubble and double bubble insulation and 5mm to 25mm EPE Foam insulation. Technical Specifications: Three layer of air bubble film laminated with both side silver metalized aluminum film. Our Product is Specially Designed for construction, container insulation. insulated bags manufacturing etc. Standard Size : 1.2mtr x 100mtr Bubble Size : 4mm x 10mm Nominal Thickness : 3.5 to 4mm Reflection Ratio : 96% Thermal Resistance Emissivity : 0.04-0.05