PolyDADMAC/Poly(dimethyl diallyl ammonium chloride, It can be used alone or in combination with inorganic coagulants, such as Poly Aluminum Chloride. Can be used to treat color wastewater from textile, dyestuff, and paper industry. Used as retention agent in the paper & pulp processing
Polydadmac This product's technical name is polydimethyl-dislkelen-ammonium chloride/polydadmac, it is cationic polymer and it can be completely dissolved in water. Properties The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of ph value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water. Specifications 1. Appearance: colorless, transparent colloid 2. Molecular weight: 4f- 105 min. 3. Solid content: 40% 4. Ph, 30% solution: 3-6 5. Ionic nature: cationic Application methods When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken. It is better to dose the product continuously. Package and storage 1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun. 2. It is packaged in plastic drums with each containing 25kg, 50kg, 125kg and 1000kg. It is packaged in plastic drums with each containing 25kg, 50kg, 125kg and 1000kg.
Polydadmac 30%, polydadmac 40%, dadmac 60%, dadmac 65%
Polydadmac 30%, polydadmac 40%, dadmac 60%, dadmac 65%
Properties The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water. Application field 1ú¬Water clarification--improves influent, process and effluent water quality by reducing color, suspended solids and turbidity 2ú¬Dissolved air flotationí¬result in clearer subnatants, increased float solids, and greater throughput 3ú¬Belt filter, centrifuge, screw press dewateringí¬for use as the primary coagulant in dual polymer programs to increase production rates, cake solids and solids capture 4)Filtrationí¬improve filtered water quality and plant throughput. SPECIFICATIONS 1. Appearance: colorless, transparent colloid 2. Molecular weight: í¦ 4í- 105 3. Solid content: í¦ 40% 4. pH, 30% solution: 4-8 5. Ionic nature: cationic Grades: PD LS 20: 20% conc., PD LS 20L :viscosity 100-300cps , PD LS 20H:viscosity 1600cps min., for fixing agent in paper or textile dyeing PD LS 35: 35% conc, viscosity 200-100cps, fixing agent in textile dyeing PD LS 41: 40% conc, viscosity 1000-3000cps, fixing agent in paper PD LS 45: 40% conc, viscosity 2500-5000cps, fixing agent or floculant for water treatment PD LS 49: 40% conc., viscosity 8000-13000cps, for water treatment DADMAC monomer: 60% or 65% conc., for polydadmac production. APPLICATION METHODS When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the construction chemicals and materials in the water and the flocs can not be broken. It is better to dose the product continuously. PACKAGE AND STORAGE 1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun. 2. It is packaged in plastic drums with each containing 125kg and 1000kg.
Polyamine, polydadmac liquid, polydadmac powder, polydcda powder & liquid.
Various concentration from 25% to 64% in liquid form. Nsf certified for water & waste water clarification. For sugar syrup clarification for improving icumsa units. Icb 1000 kgs.
Flocculants, polymer, polyacylamide, polyamine, polydadmac, pac, water chemicals.
Polyacrylamide, decoloring agent, polyaluminum chloride, polydadmac, polyamine, ferric sulphate.
Polydadmac dadmac monomer polyacrylamide (pam) super absorbent polymer (sap).
Benzalkonium chloride, pac, polydadmac, thps, benzoic acid, ammonium sulphate.
Our flocculants(polyacrylamide) in type as under: Nonionic : 0~10% ionic Anionic: 10 ~ 100 ionic Cationic : 5 ~ 100 ionic Amphoteric 15kg or 25kg paper bags
Akd, akd wax, akd emulsion, surface sizing agent, paper liquid dyes, polydadmac, quat 188, paper chemicals.
Easyfloc Anionic Polyacrylamide, it is anionic flocculant, polymer, also said anionic polyelectrolyte, it is high-molecular polymer and has such properties as flocculability, thickening, shear, resistance diminishing, and dispersion. There are active genes in the molecules. After absorbing the surface, the substance can change the status of surface and will generate hydrogen bond after interaction and absorption with many substances. In the process of water treatment, it can bridge the absorbed particles and thus enable several and even dozens of particles to connect together and lead the cementation particles to conglomerate into large floccules, so that the sedimentation for the particles in the suspension liquid can be accelerated. The product is capable of speeding solution clarification and improving filtration and other effects. It is widely used for municipal and all kinds of industrial wastewater treatment, oil drilling, papermaking, textile, EOR and DRA(DRAG REDUCING AGENT), mineral processing, construction bored pile, soil stabilization, incense making, sludge thickening and dewatering, and others. As a professional Anionic Polyacrylamide supplier and manufacturer, Easyclean Chem has been supplying quality coagulants and flocculants to 30 countries close to 10 years.
Cationic Polyacrylamide (C-PAM) is a water soluble polymer and mainly used for various industrial wastewater flocculation sedimentation, precipitation and clarification treatment, such as iron and steel plant wastewater, electroplating wastewater, metallurgy wastewater, coal washing wastewater and sewage treatment and sludge dewatering etc. It can also be used for drinking water purification and clarification. Applications 1. Can be compatible and absorb with many substances to form the hydrogen bond because it has many active groups. 2. Can flocculate the colloid with the negative charge with the properties of removal of turbidity and decoloring, adsorption and adhesion. 3. Can be used in wastewater treatment in industries such as dyeing, papermaking, food processing, construction, metallurgy, oil processing, aquatic products processing and fermentation industry, particularly suitable for city sewage and sludge, papermaking. 4. Widely used for different sludge dewatering for belt filter, screw filter and centrifugal filters.
Easyclean Series Water Decoloring Agent is a quaternary ammonium cationic copolymer, it's dicyandiamide-formaldehyde resin polymer. It has excellent efficiency in decoloring, flocculating and COD removal. The product is mainly used to decolor the effluent with high colority from textile dyeing and printing plant. It is suitable to treat waste water containing reactive dye, vat dye, acid dye, and disperse dye etc. It can also be used to treat waste water from dye houses, papermaking, pigment industry, printing ink industry, livestock farm, and some other high-colority wastewater. It also can be used in the production process of paper& pulp as retention agent
ACH500 is the highest content Al2O3 in PAC family, excellent coagulation effects, stable and effective purification process, low throwing quantity and cost, low water insoluble sludge, low basicity and low iron content. Environmental, healthy, safe, reliable, non-poisonous, harmless. Quality match USP-34 standard. CAS No.: 12359-72-7
PAC-300 is Yellow Powder, readily soluble in water, excellent flocculant effects, stable and effective purification process, low throwing quantity and cost, Al2O3 content 30%. Environmental, healthy, safe, reliable, non-poisonous, harmless. Quality is higher than China National Standard GB15892-2009.
PolyDADMAC is a cationic quaternary ammonium polymer which is completely dissolved in water, it contains strong cationic radical and activated adsorbent radical, which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the wastewater through electro-neutralization and bridging adsorption. It achieves good results in flocculating, de-coloring, killing algae and removing organics.
Polyamine is liquid cationic polymers of different molecular weight which work efficiently as primary coagulants and charge neutralization agents in liquid-solid separation processes in a wide variety of industries. Applications The product can be used to mix with inorganic coagulants, such as polyaluminium chloride or aluminum chlorohydrate for treatment of low-turbidity waste water or tap water. It can also be used in purification of waste water from oil-field, or as anionic trash catch in white water system in paper making.
