PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability. Polycarboxylate Superplasticzier we produce types as below: 1. High water reducing type (normally they can be satisfied for concretes' requirements): JH03 basic standard type(under most exported.) JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.) JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.) 2. Water reducing and slump retention type JH02 water reducing and slump retention type.(New Research on base of JH03.) 3. High slump retention type JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.) JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.) JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.) Exporting loading: 20'GP container loading: 1. 220kg/drum, 80 drums 17.6 T 2. 1150kg/drum,20 drums 23 T 3. 20-25tons/flexitank. 20-25 T
This type of product has a higher water reduction rate, which is higher than JS-103, and has ultra-high slump protection performance. It is especially suitable for the environment with poor materials or summer with high temperature. Compared with the polycarboxylic acid mother liquor on the market, it can reduce the consumption of slump protection mother liquor by 20%-40%.It is mainly used in high-strength concrete with high requirements, and its products are mainly used in high-speed railway and high-speed railway Road, hydropower and other large engineering projects pumped concrete, super fluid self-compacting, high strength and high performance concrete and commercial concrete. Product Feature 1.It has a higher water reduction rate and a higher slump protection performance, especially for the concrete with great loss in time. 2.High water reduction rate and low dispersion velocity. 3.The comprehensive cost performance is high, especially suitable for summer, high temperature environment.
Polycarboxylate Superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
HW-2 series Polycarboxylate superplasticizer is one of the west generation highly effective water reducer of our corporation, the technology is original creation, and the synthetical function is excellent. It is can produce different strength grade of the concrete and is prepare normal concrete ideally admixture. HW-2 series Polycarboxylate superplasticizer is use in self-compacting concrete,high performance concrete and dry-mixed mortar.Ití»s technical-economical performances unattainable in the past.
TPEG is a kind of main raw material (polycarboxylate ether monomer) for producing high performance water reducing type and slump retention type polycarboxylate superplasticizer, it is produced with isopentenol and ethylene epoxide as main raw material. CHEMICAL FORMULA â? CH2=C(CH3)CH2CH2O(CH2CH2O)nH, n=10~60 â? TPEG-2400 is a polyoxyethylene isopentenyl ether with molecular weight 2400.Itâ??s produced by isopentenol and ethylene epoxide as main raw material. PRODUCT CHARACTERISTICIS â? This product is the main raw material for high performance polycarboxylate superplasticizer â? The water reducer from this material(TPEG-2400) has good adaptability to cements. â? Compared with other polycarboxylate material, the production cost of water reducer from this material is greatly reduced. â? The water reducing rate of the water reducer (solid content 22%) from this material amounts to 30% under 1.1% concrete addition. â? The water reducer from this material is characterized by early strength,high-strength. The early strength and 28 daysâ??strength of the concrete is greatly improved, compressive strength ratio %: 1 Dayâ?¥180; 7 Daysâ?¥170; 28 Daysâ?¥150. â? The water reducer from this material has high durability,can efficiently reduce the water/gel ratio, enhance durability, reduce risk of shrinkage and creep. â? The water reducer from this material has less slump loss, which grows initially without compromising strength, it also has sustained release effect, slump retention is â?¥190 mm. â? The water reducer from this material is environment friendly, chloride ion is no more than 0.1%, comply with the ISO 14000 international environment protection management standard. RECOMMENDED FOR PCE made from TPEG-2400 can be used to produce high performance, high strength commercial concrete at work site or long-distant convey. PRECAUTIONS It is non-toxic, nonflammable and can be shipped as general chemicals. Avoid direct sunlight. Keep away from fire or any kind of heat source. Stored separately with oxidants and strong acids and alkali in cool and ventilated place. For more details, please contact with us~
JLY-03 Series Early strength type is an eco-friendly new generation high performance polycarboxylate superplasticizer. It is based on the reaction between the molecule of polycarboxylate superplasticizer and cement, designing special structure molecule of polycarboxylate, to promote combination of granules of cements with hydrone, to finish hydrating and enhance the initial strength. FEATURES AND BENEFITS  Enhance high strength : It has higher early strength growth ratio, can reduce shrinkage performance and the carbonation rate of concrete.  High water reduction: Water reducing ratio can attain at least 25% at saturated dosage, which assures improving the workability of concrete, enhancing the concrete strength and saving cement application amount. Increase slump retention: No retempering, It can well delay the transport and on-site retention time of the concrete, assure the pumping performance of the concrete. Good cohesion: Ease of pumping, No delamination,No segregation or bleeding.  High flowability: Ease of placing and compaction. No segregation. RECOMMENDED FOR Pumped concrete Precast concrete Early strength concrete High flowability concrete  High early strength concrete Long distance transport concrete JLY-03 water reducing type series is available in 1000kgs, 200kgs, 25kgs drums or bulk delivery. Contact with us for more details please
High-performance Polycarboxylic Acid Superplasticizer is widely used in Concrete engineering. It can not only greatly reduce the amount of cement and water, but also significantly improve the workability of concrete, improve the quality of the project, reduce the cost of the project, save energy consumption, and have no pollution to the environment. FEATURES AND BENEFITS Improve the compressive strength of concrete (production of concrete with strength over 50N/mm²) Allows reduction of mixing water (up to 35%) without reducing the consistency of the concrete mixture. Reduced cement consumption, thereby reducing costs (while maintaining a constant water-cement ratio) Does not cause steel corrosion (low chloride content) RECOMMENDED FOR Pumped concrete High flowability concrete High durable concrete High strength concrete Ready-mixed concrete  Long distance transport concrete Dosage of JLY-01 should be decided according to the mix design, surrounding, the required water reducing rate and materials.Normal dosage is 0.7% weight of cement with a range of 0.25%-0.8%. Trial mixes should be made to determine the optimum dosage. For more details, please contact with us. Enjoy your day
Supply Ability: 30 sets per Month Weight (KG): 5600 kg Productivity: 1.5cbm Condition: New Place of Origin: China Warranty: 1 Year Discharge Way: mixing drum 270�°discharges Charging Capacity: optional UNIQUE SELLING High power engine DOINT Water Supply Mode: optional Speed of optional Mixing Drum: Warranty of core 1 Year components: Reclaiming capacity: optional Brand Name: CANMAX Video outgoing-inspection: Provided Marketing Type: New Product Outline Dimension::optional Core Components: Motor,Pump,Engine Applicable Industries: Construction Cycle Period: Motor Power: Mixing Power: 58Kw Machinery Provided Test Report: Packaging D�©tails: Export standard packaging
Description Polycarboxylate Superplasticizer concrete admixture (Powder) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (Powder) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (Powder) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway projects. In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (Powder) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits Polycarboxylate Superplasticizer concrete admixture (Powder) has the same technical specifications with PC-L while remarkably reducing the cost of package and transportation. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) is much easier to be handled in storage and transportation compared with PC-L. 3. Excellent compatibility with various types of cements. 4. High Water Reducing Rate: Low dosage, and low slump loss. Low chloride and alkali content, no corrosion to steel-bar. 6. High Stability: Neither precipitation nor layers at low temperature. 7. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (Powder) is applied in the form of powder, normal dosage ranges from 0.15% to 0.6% of the weight of cementitious material in 1m3 of concrete. When applied in the form of liquid by being mixed with and dissolved into water, Polycarboxylate Superplasticizer concrete admixture (Powder) can be changed into liquid of which density varies from 10% to 40%. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.2% of the weight of cementitious material in 1m3 of concrete. 3. Polycarboxylate Superplasticizer concrete admixture (Powder) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (Powder) is applied, since slump loss of concrete is closely related to it. 5. Polycarboxylate Superplasticizer concrete admixture (Powder) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 6. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 7. When applying Polycarboxylate Superplasticizer concrete admixture (Powder) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (Powder) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (Powder) for powder: Woven fabric bag with plastic liner. Net weight: 20kg +/- 0.13 kg. 2. Polycarboxylate Superplasticizer concrete admixture (Powder) needs to be stored in well-ventilated and dry place. 3. Keep Polycarboxylate Superplasticizer concrete admixture (Powder) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 20kg/bag, 12 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (50%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (50%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1) As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (50%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (50%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1. When Polycarboxylate Superplasticizer concrete admixture (50%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2. Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete. When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage thereafter is 2% of the weight of cementitious materials. For example, 100kg of Polycarboxylate Superplasticizer concrete admixture (50%) (50% concentration) can be mixed with 400kg of water to make solution of 10% concentration. 3. Polycarboxylate Superplasticizer concrete admixture (50%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4. Polycarboxylate Superplasticizer concrete admixture (50%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5. Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6. The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (50%) is applied, since slump loss of concrete is closely related to it. 7. When applying Polycarboxylate Superplasticizer concrete admixture (50%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8. When Polycarboxylate Superplasticizer concrete admixture (50%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1. Polycarboxylate Superplasticizer concrete admixture (50%) for liquid: It is packed in 12000kg (1000Liter) per IBC Tank. 2. Store Polycarboxylate Superplasticizer concrete admixture (50%) in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (50%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it's been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Description Polycarboxylate Superplasticizer concrete admixture (40%) is a high performance, 100% poly-carboxylate based polymer, also named PCE. Polycarboxylate Superplasticizer concrete admixture (40%) is specifically developed as an effective dispersant, fluidifier and high range water reducing agent for concrete and other mineral materials, which is air entraining. It complies with ASTM C 494, Type F specifications. Application (1)As a new generation of environmental friendly concrete admixtures, Polycarboxylate Superplasticizer concrete admixture (40%) can be applied in hydraulic, electricity, port, bridge, railway, tunnels and highway. (2) In the production of self-compact precast concrete and conventional concrete, Polycarboxylate Superplasticizer concrete admixture (40%) leads to low water/cement ratios, but maintains a normal level of workability. Features and Benefits 1. Excellent compatibility with various types of cements. 2. High Water Reducing Rate: Low dosage, and low slump loss. 3Low chloride and alkali content, no corrosion to steel-bar. 4. High Stability: Neither precipitation nor layers at low temperature. 5. Environmental Friendly: Free from formaldehyde and nontoxic. Uses and Dosages 1.When Polycarboxylate Superplasticizer concrete admixture (40%) is applied, the dosage normally ranges from 0.3% to 1.2% of the weight of cementitious material in 1m3 of concrete. In order to optimize the dosage, experiments are required before the adoption of it or changing of the cement type. 2.Recommended dosage: 0.4% of the weight of cementitious material in 1m3 of concrete.When applied in ready-mixed station, it should be diluted into solution with the concentration of 10% and the recommended dosage. 3.Polycarboxylate Superplasticizer concrete admixture (40%) can be added into cement paste together with water or after mixing, while the latter approach is preferred. 4.Polycarboxylate Superplasticizer concrete admixture (40%) is alkalescent, nontoxic, non-corrosive and environmental friendly. If it gets onto skin or in the eyes, please wash it off with clean water at once. If there is skin allergy, please see a doctor. 5.Do not mix it with naphthalene-based admixtures. If other admixtures, such as set retarder or corrosion-inhibiting admixture, are required simultaneously for some special projects, compatibility tests should be conducted beforehand. 6.The quantity of water must be strictly controlled when Polycarboxylate Superplasticizer concrete admixture (40%) is applied, since slump loss of concrete is closely related to it. 7.When applying Polycarboxylate Superplasticizer concrete admixture (40%) in steam curing concrete or other special concrete, abundant experiments are highly recommended to make sure it satisfies the expected requirement. 8.When Polycarboxylate Superplasticizer concrete admixture (40%) is used to make concrete at or below C45, the total cost may be reduced by increasing the quantity of minerals. Package, Storage & Handling 1.Polycarboxylate Superplasticizer concrete admixture (40%) for liquid: It is packed in 1100kg (1000Liter) per IBC Tank. 2. Store it in covered containers and keep it from rain, sundry, and evaporation. 3. Keep Polycarboxylate Superplasticizer concrete admixture (40%) from sunlight and below freezing point. Its storage stability can retain 12months in original package, but please use it up in 60days if it been opened and repacked. 1.16 tons/IBC tank, 20.88 tons loaded in a 20ft.
Polycarboxylate Based Superplasticizer is the third generation concrete plasticizer which advance developed from lignosulfonate calcium type and naphthalene type plasticizer. Polycarboxylate is the latest liquid type superplasticizer with slump retention performace developed from superplasticizer. Polycarboxylate is a modify liquid type superplasticizer researched by new technology.it is a greeen environmental product with good comprehensive index and no pollution.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
HPEG is a kind of main raw material (polycarboxylate monomer) for producing high performance water reducing type and slump retention type polycarboxylate superplasticizer, it is produced with methallyl alcohol and ethylene epoxide as main raw material. CHEMICAL FORMULA:  CH2=C(CH3)CH2O(CH2CH2O)nH, n=10~60 HPEG-2400 is a polyoxyethylene methallyl with molecular weight 2400.It s produced by methallyl alcohol and ethylene epoxide as main raw material. PRODUCTS CHARACTERISTICS: This product is the main raw material for high performance polycarboxylate superplasticizer The water reducer from this material(HPEG-2400) has superior dispersibility, low dosage, high water reducing rate, high adhesive force, good reinforcing effects. The water reducer from this material has high durability,can efficiently reduce the water/gel ratio, enhance durability, reduce risk of shrinkage and creep. HPEG-2400 is non-toxic, non-corrosion, good water solubility. The water reducer from this material is environment friendly, corrosive free to steel bar, comply with the ISO 14000 international environment protection management standard. RECOMMENDED FOR made from HPEG-2400 can be used to produce high performance, high strength commercial concrete at work site or long-distant convey. PRECAUTIONS It is non-toxic, nonflammable and can be shipped as general chemicals. Avoid direct sunlight. Keep away from fire or any kind of heat source. Stored separately with oxidants and strong acids and alkali in cool and ventilated place. For more details, please contact with us
Hollow Plastic Concrete Formwork for fundational building Size:1220*2440mm Thickness:15mm/18mm/20mm MOQ:100pcs Advantage:Reusable Application:concrete panels building formwork Color:Grey Weight:31kgs Quick Details: Product Name:Plastic concrete formwork Application:Concrete panels building formwork Material:PP plastic material Surface:Cleanly ,Glossy and smoothy Size: 1220*2440mm Thickness: 15mm, 18mm,20mm Type: Construction formwork Color: Grey Certificate: ISO9001:2008 Weight: 31KGS Packaging & Delivery Selling Units:Single item Single package size: 244X122X2.0 cm Single gross weight:31.0 kg Package Type:carton box packing onto wooden pallet Lead Time : Quantity(Piece)1 - 200201 - 336337 - 810>810 Est. Time(days)5715To be negotiated
Rose oils are extracted from the Rosa damascena (Bulgarian) and Rosa centifolia (Moroccan) also known as 'rose de mai'. Rose Otto is the essential oil steam distilled from fresh roses. Rose concrete a solvent extraction of fresh roses. Rose absolute is extracted from the rose concrete using alcohol. Rose Otto is distilled from the Bulgarian rose or Rosa damscena. The Otto is an almost clear pale yellow liquid. When it is very cold it solidifies but it is easily warmed to liquid again. Rose Otto smells rich, floral, warm and spicy with honey undertones. The smell of fresh roses becomes more apparent at when the Otto is diluted. Rose Otto is the most expensive extract of roses. Rose concrete from Rosa damscena is a deep orange colored mass of a jam-like consistency, can be greenish yellow.