PLAIN AND DEFORMED REINFORCEMENT BARS DIAMETER: Between 8mm-60mm LENGHT : Standart 12mm (between 6-18m upon request) PACKAGING: Standart - 2000 kg bundles (depending on the customer demand, bundles may also be made between 500- 5000 kg.
We are supplier of Reinforcement Bars. can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available. hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Reinforcement bars, or rebar, are crucial in the construction industry, providing strength and durability to concrete structures. Concrete is strong in compression but weak in tension, and rebar enhances its tensile strength. This ensures the longevity and stability of buildings, bridges, roads, and other infrastructure. Key Features: High Strength and Durability: Made from high-quality steel, rebar is designed to withstand heavy stresses and loads, preventing cracks and structural failure over time. Corrosion Resistance: Some rebar is coated with anti-corrosion materials, protecting it from rust, moisture, and harsh environments, thus prolonging the concrete structureâ??s lifespan. Variety of Sizes and Grades: Available in various diameters, lengths, and grades, rebar provides flexibility for diverse construction projects. Common grades include Grade 40, Grade 60, and higher, suitable for both residential and industrial applications. Bendable and Malleable: Rebar can be bent and shaped to meet specific design requirements without compromising strength, making it ideal for complex architectural designs. Easy to Install: Standardized lengths and diameters make rebar easy to transport, handle, and install. It can be welded, tied, or mechanically spliced for construction needs. Cost-Effective: Rebar is a long-term solution for reinforcing concrete, ensuring structural integrity while minimizing the need for frequent repairs or replacements. Applications: Residential and Commercial Buildings: Used in foundations, columns, beams, and slabs to provide support and prevent cracking. Bridges and Overpasses: Rebar ensures the safety and stability of high-stress structures. Roadways and Pavements: Strengthens roads, sidewalks, and other paved surfaces, allowing them to withstand heavy traffic loads. Industrial Structures: Reinforces heavy-duty industrial buildings, including factories, warehouses, and power plants. Specifications: Material: High-quality steel (carbon or alloy steel) Length: Available in standard lengths or custom-cut for specific projects Diameter: Ranges from 6 mm to 40 mm Grade: Available in various grades, including Grade 40, Grade 60, and higher Finish: Can be plain or deformed (with ridges for better bonding with concrete) Why Choose Our Reinforcement Bars? Our rebar is manufactured to meet international quality standards, ensuring superior strength, reliability, and performance. Whether for residential homes or large commercial projects, our reinforcement bars provide the structural support needed for safe, durable concrete work.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Deformed reinforcing steel bars Debars for constructions, sizes from 8mm up to 32 mm in 2 mt export bundles manufactured according to bs/din/gost/en or astm standards Origin: ukraine, turkey, iran, russia, china, india Payment: 100% sight lc or deferred payment lc is acceptable. Size: 8mm up to 32mm Bundle weight: 2 mt max. Length: 12 m or 11.7 m
Reinforcing deformed steel bars Origin: ukraine Destination: worldwide Delivery: fob - port ilichevskfurther standards: Dcty 3760-98, 3-5 ps , Ceq 0, 52% Also Gost 5781-82 A240s Din Diameters form 8 to 32 mm Lengths 12 mm Packing - about 5 mt (up to 5.5 mt bundled)
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
Bar mops, dish cloth, duster cloth, floor cleaning cloth, stockinet rolls, face cloth, hand towels, bath towels, beach towels, kitchen towels, tea towels ( stripped, checked, printed, embroidered, jacquard ), waffle weave kitchen towels, glass cloth, herringbone kitchen towels, terry tea towels, mono check tea towels, aprons, pot holders, hot pad, oven mitts, silicon oven mitt, terry oven mitt, pan grabbers, chef hat, caps, socks ( cotton, polyester ), cotton rag rugs & mat, bed sheets, table cloth, napkins, cushion covers, thermal blankets, fleece blankets, mink blankets, floor carpet, cotton bags, tote bags, shopping bags, jute bags, paper / board bags, fruit picking bags, coin bags, cotton webbing tape, cotton/ polyester braided cards, home textiles & made ups, jute webbing, pp webbing, soft plant tie, coconut coir pith / peat..
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
Deformed Steel Bars - Hot rolled Diameter: 6mm to 32 mm Length: 6m, 12m Grade: SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Surface: Black, Corrugated, Straight length Application: Widely used in construction industry for reinforcing concert.
STEEL REINFORCEMENT BARS / STEEL REBARS / DEBARS We can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available -Origin: Turkey Look forward to receive LOI, so we can quote our best prices.
Deformed Steel Bars (reinforcement steel bar) ASTM Rebar - 8 to 12mm 12m Please give us your exact spec needed, we can supply.
We supply a comprehensive range of standard N grade, 500 MPa deformed reinforcing bar (D500N). Stock lengths are available off-the-shelf, but rebar is often supplied processed (cut, bent, threaded) or fabricated to suit the specific requirements of your project.
We are supplier and exporter of TMT Rebars. TMT Bars / Rebar which find usage in the core infrastructure development like construction of Multi Storeyed buildings, bridges, dams, railways, power plants as reinforcement material. These bars are rolled from Tested billets as per IS 2830 which ensures uniform physical and mechanical properties. The range varies from 8mm to 32mm, conforming to BIS 1786 - Fe 415 and Fe 500. Properties Units IS : 1786 Fe 415 OUR BARS IS: 1786 Fe 500 OUR BARS
1). Size: 25mm*25mm-250mm-250mm 2). Wall thickness: 1.5mm-25mm 3). Length: 1m-12m 4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc 4). Certificate: ISO 9001-2008 5). Packing: Standard exporting package. 6). Delivery: Within 20 days after receiving the deposit. 7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
Food product, fmcg products, toothpaste, toothbrush, mouthwash, soap bar, liquid hand wash, body wash, face wash, shampoo & conditioner, body lotion, body cream, body moisturiser, sun control, shaving razor, shaving cartridges, shaving blade, shaving gel, shaving foam, shaving cream, after shave, hair colour, talcum powder, fairness cream, deodorant, roll on, deodorant spray, sanitary napkins, baby diapers, baby wipes, detergent powder, liquid detergent, detergent bar, cleaning powder, cleaning liquid, liquid hand sanitizer, antiseptic liquid, disinfected spray, beverages, tea bag, loose tea, flavoured herbal tea, baby food, candy, chocolate, confectionery, office stationery, and snuff , condoms, beverage and cold drink.
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.
