Find Verified Pin Header Single Row Right Angle Sip Type Suppliers, Manufacturers and Wholesalers

Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance

1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.

Yellowtail Scad Also popular as the one finlet scad, the yellowtail scad is a fish that is most often seen inhabiting the Indo Pacific region from Africa to Japan, Australia and Hawaii. Its highly prominent adipose eyelet and finlet type extensions make it distinct from other fishes in this species. You will find the Yellowtail scad near the coastal areas and preying upon crustaceans and small fishes. Many fisheries nurture this fish and it is usually caught using the netting and hook and line methods. Normally this fish is considered extremely prized and consumed with fervour in most regions where it is found. Both its jaws have a single row of teeth however in slightly older ones you may see two or three lines of teeth. Itâ??s caudal and dorsal fins would be yellowish green in colour and the pelvic fins are white while rest of the fins are hyaline. The Yellowtail scad is very popular among humans and in countries like South Arabia, Malaysia its catch is too high. Most of its catch happens in the months between January and April In countries of South East Asia this fish is cooked by boiling, steaming and frying. It can also be preserved using methods like drying and salting. PACKING 1 X 10 KG IF SIZES U/5, 4/6, 6/8, 8/12, 12/15, 15/18

Your porch swing is the bridge between indoors and outdoors. That is why wood is the most natural material for a porch swing, whether it is left in its natural color or is painted to fit the design of your house. Wooden porch swings are versatile pieces of furniture and you can find one in any style, from Victorian to Mission. There are also several sizes to choose from. Some people prefer to have a few single-seaters, while others like wide 6 foot swings to fit the whole family. The kind of wood you chose for your swing will depend mostly on your budget. The stronger and more weather-resistant the wood is, the higher the price is. Teak and cedar are fairly expensive, but will last you a lifetime. You can find an affordable and durable wooden porch swing made of treated wood, a cheaper wood which is chemically altered to be more resistant. Some types of wood are fairly heavy, so it is very important to get the right kind of accessories and to hang your porch swing where it will have sufficient support. Make sure to tell your fat uncle Max to stay away from your swing regardless of what its guarantee says.

Cast Steel Globe Valve (Right Angle Pattern) DIN 2401, BSEN 13709 Pressure Rating : PN-40 Material : Cast Steel (WCB) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem Ends : Flanged, Butt Weld Operator : Hand wheel, Gear, Electric, Chain Wheel Specials : IBR Item Code : CCS00037 Size : 15mm Notes : Available Valve Size : 15mm to 250mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.

It has a left/right wing-type structure that allows children to lean their heads comfortably when sleeping, and the angle can be adjusted to help them sleep comfortably. Specification: - Applicable vehicle type: Both 2nd-row headrest rods spacing: 130 (mm) - Rod thickness: 14 (mm) - Size: Cushion : 520 x 160 (mm) (left and right wings stretched as much as possible) and 370 x 160 (mm) (left/right wings folded as much as possible) - Fixing plate 400 x 340 (mm) - Weight: Cushion 600 g, fixture plate 270 g

* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. * H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. * And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Carbon Steel H beam Standard AISI, ASTM, BS, DIN, GB, JIS, etc Web Width: 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Pickling, Phosphating, Galvanizing Inspection : BV,SGS,MTC,etc. Warehouse : Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow

With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life. H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Galvanized H beam Standard : AISI, ASTM, BS, DIN, GB, JIS, etc Web Width : 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Perforated/galvanized/black Inspection : BV,SGS,MTC,etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Principle Electric steering system is equl with the power steering system equipped a solenoid valve. It is the system which steers with solenoid valve by comparing resistance values of electric handle and rudder angle sensor It consists of a cylinder and a pump, an solenoid valve and a electric handle. The cylinder makes the rudder move and the pump supplies the oil to the cylinder. Handle is to swap the direction of hydraulic pressure Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance Pump is classified Pulley type drived by engine and Power unit drived by electric motor We offer 7 kinds of handles with various appearance and functions. You can choose the combination fit to your vessel Key features Narrow handle diameter helps you operate with small energy and power steering system offers light operation The number of rotation wheel is 2.8 like the hydraulic handle Analogue type of a indicator for handle and a rudder angle indicator are applied. Controlled by Joystick / Autopilot USB port Autopilot can be used together. Application Vessel above 350HP A wide range of vessel from fishing boat to ferry

Principal The manual steering system is the device that a helm pump driven by the rotation of the steering wheel supplies oil to the cylinder and pushes the piston of the cylinder to have the rudder shaft move. It is a simple system consisting of a helm pump and a cylinder. Cylinder has 4 types of single, rotary, twin, and two rudder. D-I offers the best options to combine kinds of help pumps and cylinders. Our choice mostly satisfies customers, but in case of your special needs, you have many optional ways. The number of rotation wheels is defined by the capacity of the cylinder and the helm pump (cc/rev). You can select the specification you want. Key features Simple system 2 helm pumpsâ??below 50cc, above 50cc Compatible with commercial handles in the range of 300 mm to 1,500 mm Dual handle installation is possible. The lock valve is supplied as default, which can fix the rudder where the handle stops. Structure that the rudder does not rotate even when the tide powers the rudder Rudder angle indicator attachable Application Suitable for vessels below 500 HP A range of vessels from leisure ships, fishing boats, commercial boats, and passenger boats