Product Name: 1,2-Pentanediol INCI Name: PENTYLENE GLYCOL Molecular Formula: C5H12O2 Molecular Weight: 104.15 Appearance: Clear colorless to light yellow liquid Purity: 99% CAS NO.: 5343-92-0 EINECS No.: 226-285-3 Supplier: ZHENYIBIO 1,2-Pentanediol is used in synthesizing quinoxalines from biomass-derived glycols. Also used in the synthesis of propiconazole (P770100) a fungicide as well as other antifungals.
B&B has successfully developed High quality 1,2-Pentanediol is processed, refined and purified with raw materials, with a very low characteristic odour. BP-800 is readily soluble in water and oil. Widely used cosmetic raw material with multifunctional properties. It is an excellent moisturizing ingredient for topical preparations. Besides it has very good antimicrobial and solubilizing properties, it also improves the water resistance of sunscreen formulations, improves the water-binding capability of the skin and increases the degree of hydration. Emulsion particle size can be reduced, thus contributing to the stability of the emulsion. Also make the products look more beautiful and attractive.
Natural pentylene glycol, glyceryl caprylate, 1,3 propanediol, 2,3 butanediol and, sythetic 1,2 glyols(pentylene glycol, 1,2 hexanediol, capryly glycol, ethyhexylglycerin).
BMP-800 is mainly used as a humectant and is a great alternative to common glycols such as 1.3 butylene glycol, 1.2 propylene glycol, dipropylene glycol, sorbitol and glycerin. In addition, BMP-800 has a better antibacterial effect than other glycols, helping to dramatically reduce the use of typical preservatives in formulations. In addition to humectant, BMP-800 is used as a emollient, preservative booster, emulsion stabilizer, disperser and solvent. And BMP-800 serves to provide a soft, non-stick feel and improve skin sensitization. Especially, when used with glycerin for cosmetic cream formulation, it can make up for a better feeling and moisture. BMP-800 is also used as a fragrance enhancer, and has excellent solubility, allowing it to be directly added to the aqueous phase at room temperature.
Of special note, B&B has successfully developed High quality 1,2-Hexanediol with no color/odors but purity of 99.9% after three years of hard work. As a mandatory ingredient with no harm to the human body, 1,2-Hexanediol acts as an antiseptic, a sterilizer and a moisture material for cosmetics, living products and other products that make contacts with human bodies. In the past, the nationâ??s entire requirements for 1,2-Hexanediol were imported from Japan, but nowadays our technology enables us to produce them and even exporting them to Japan, France and the USA.
BEG-800 (Ethylhexylglycerin) can be used in a broad range of cosmetic applications. BEG-800 is a very effectives an active component in deodorants due to its inhibiting effect on the growth of odor -causing bacteria. BEG-800 enhances the antimicrobial efficacy of typically used preservatives by doing so enables lower concentrations of the cosmetic preservative in the formulation applied. BEG-800 is not just a preservative but also a synthetic skinconditioning agent. BEG-800 improves the skin feel of cosmetic formulations and functions as emollient and mild humectant. The skin-feel of BEG-800 can be compared to glycerin. *Ethylhexylglycerin reduced tackiness, greasiness, and soaping of the formulation and improved speed of absorption, as well as the overall impression of skin feel
1. MOQ: 10,000 units per each bottle or Can be mixed each bottle in 20Fit container. 2. Made In Korea, Hand Sanitizer. 3. Used Vegetable ethyl alcohol(Ethanol) 68% or 70%. Vegetable ethyl alcohol(Ethanol) has been extract from cereal thru fermentation and it is like kinds of alcoholic drink. It has less skin irritation and it is safe for the human body. 4. Approved from "OTC (Over the counter drug from Ministry of Food & Drug safety" in Korea, "FDA" in the U.S.A, "CPNP" in Europe. 5. The factory is got the quality control by "CGMP(Cosmetic Good Manufacturing Practice" and "ISO". 6. The monthly produce capacity is about 4,000,000 units. 7. Can be supported OEM Label. (Depends on the volume)
1. Made In Korea, KF94 MASK. 2. Approved "Certificate of pharmaceutical(Quasi drug)" from Ministry of Food & Drug safety in Korea. 3. Approved "FDA" in the U.S.A. Payment Terms: - T/T In Advance or - T/T 50% In Advance and 50% before the shipment
It is mainly used in making polyester, polyester resin, hygroscopic agent, plasticizer, surfactant, synthetic fiber, cosmetics and explosives, as solvent for dyes/inks, antifreeze for engine, gas dehydrating agent, manufacturing resin, wetting agent for cellophane, fiber, leather and adhesive. It can produce synthetic resin PET, fiber grade PET namely polyester fiber, bottle chip grade PET for making mineral water bottle, etc. Also can produce alkyd resin, glyoxal, etc., also used as antifreeze. In addition to being used as anti-freeze agent for automobile, it is also used for conveying industrial cooling capacity, which is generally called refrigerant carrier.
Melting point 126-128 C Boiling point 208 °C density 1.06 vapor density 3.6 (vs air) vapor pressure
1. ashwagandha extract 1.5% 2. zingiber officinale 2.5% 3. glycine powder 4. black seed oil 5. flax seed oil 6. castor oil (clear) 7. black pepper extract 95% 8. curcumin 95% 9. aloe vera 200x 10.. potassium sorbate 11. propylene glycol.
Diethylene glycol (DEG) is an organic compound with the formula (HOCH2CH2)2O. It is a colorless, practically odorless, and hygroscopic liquid with a sweetish taste. It is a four carbon dimer of ethylene glycol. It is miscible in water, alcohol, ether, acetone, and ethylene glycol. DEG is a widely used solvent. It can be a contaminant in consumer products; this has resulted in numerous epidemics of poisoning since the early 20th century.
Monoethylene glycol (MEG) in its pure form, it is an odorless, colorless, syrupy liquid with a sweet taste. It can be used for applications that require chemical intermediates for resins, solvent couplers, freezing point depression, solvents, humectants and chemical intermediates. These applications are vital to the manufacture of a wide range of products, including resins; deicing fluids; heat transfer fluids; automotive antifreeze and coolants; water-based adhesives, latex paints and asphalt emulsions; electrolytic capacitors; textile fibers; paper and leather
Butyl di glycol (also known as BDG, butyl dioxitol, diethylene glycol monobutyl ether, 2(-2butoxyethoxy) ethanol and butoxydiethylene glycol) is a colourless, clear organic compound with a faint characteristic odour that has the formula C8H18O3. It is soluble in water and miscible with many common solvents, and also has low volatility and a high boiling point. These are the factors that make butyl di glycol most useful in the paint industry.
Butyl glycol (also known as BG, 2-butoxyethanol, glycol monobutyl ether and ethylene glycol monobutyl ether, butyl cellosolve, butoxyethanol) is a clear, colourless, oily liquid with a unique sweet yet mild odour and has the formula C6H14O2. It is a butyl ether of ethylene glycol and is miscible with water and common organic solvents. It has been produced industrially for over half a century and is used primarily as a solvent in paints and surface coatings but also in inks and cleaning products.
Product Name: 1,2-Octanediol INCI Name: CAPRYLYL GLYCOL Molecular Formula: C8H18O2 Molecular Weight: 146.23 Appearance: Colorless to white Solid Purity: 99% CAS NO.: 1117-86-8 EINECS No.: 214-254-7 Supplier: ZHENYIBIO caprylyl glycol (1,2-Octanediol) is an emollient with moisturizing properties that may also be used as a cosmetic stabilizer. When found in combination with phenoxyethanol these two ingredients work together as an anti-microbial.
Product Name: 1,2-Propanediol INCI Name: PROPYLENE GLYCOL Molecular Formula: C3H8O2 Molecular Weight: 76.09 Appearance: Viscous Liquid Purity: 99% CAS NO.: 57-55-6 EINECS No.: 200-338-0 Supplier: ZHENYIBIO Propylene glycol is used for similar applications as other glycols. Propylene glycol is an important raw material for unsaturated polyester, epoxy resin, and polyurethane resin. The use amount in this area accounts for about 45% of the total consumption of propylene glycol. Such unsaturated polyester is used extensively for reinforced plastics and surface coatings.
Product Name: Propylene Glycol Appearance:Colorless Liquid Purity:>99% CAS:57-55-6 EINECS:200-338-0 Solubility: It can be mixed with water and other organic solvents. Propylene Glycol is a viscous colourless liquid which is nearly odourless but possesses a faintly sweet taste.Forty-five percent of propylene glycol produced is used as chemical feedstock for the production of unsaturated polyester resins. Propylene glycol is used as a humectant, solvent, and preserva-tive in food and for products.
Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188°C (370.4°F) Melting Point: -59°C (-74.2°F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco. Packaging Details Mono Propylene Glycol MPG CAS: 57-55-6 Iron drums, 215kg/drum, 17.2 MT/20GP Flexitank: 22-23MT/ flexitank cost little