Total productivity in the production of wood fuels granules (pellets) is - 500 tons/month. (500 tons/month). The quality of the products is confirmed by the test protocol and meets the following characteristics: Size: length...... L - 20-40 mm Diameter (diameter) ................... D - 6 mm Humidity (humidity) ..... at room temperature - 6-1% Ash content ...............0.6% Heating value, the highest (calorific value, max) 19.03 MJ/kg The lowest (calorific value, min)..... 17.50 MJ/kg Mechanical strength (mechanical strength) 99.0% Sulfur................................................. ......... 0.01% origin - UKRAINE PAYMENT - FOB Payment terms can also be discussed
The pellets are used in the production of steel, which is used in the construction of bridges, cars, planes, bicycles, household appliances and much more. But, before this, the ore goes through a blast furnace that only works when air can circulate freely. For this reason, the material needs to be big enough so that there are spaces between each piece. On top of this, the ore needs to be strong enough not to be crushed thereby obstructing the blast furnace. Thus, the production of pellets is fundamental to the steel production process
Packing Bag : 500 KG | 1 MT Diameter : 0.8cm Length : 5cm Specification. -Moisture : 7.08% -Ash Content : 2.03% -Volatile Matter : 72.26% -Fixed Carbon : 15.62% -Total Sulfur : 0.24% -Gross Caloric Value : 4371 Kcal/KG -Carbon : 44.69% -Hydrogen : 5.57% -Nitrogen : 0.43% -Oxygen : 39,96% -Hardgrove Grindability Index : 21
Turkey origin - 200MT per month Data info: Density: 0.91 - 0.93 g/cm Melt Flow Index (190C/2.16 kg): 0.7 to 1.2 g/10 Moisture Absorption (23C, 50%Rh): min 0.01 - 0.03 % Ash Content: 1% Form: 3 mm granules POL: Istanbul, Turkey Place of Origin: :JAPAN, US, EUROPE Unit :Ton/Tons Minimum Order :25 Tons Payment Term :T/T 50/50 and L/C 100% at sight Estimate Lead Time :15 - 20 days Origin :Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity :200 tons/month Packaging :Jumbo Bag
Alfalfa Pellets Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same. Available In : 8 x 25 mm We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry Alfalfa Pelleting Process Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation. The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments. After 7 days of meticulous administration, the green alfalfa is converted in to hay. The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same. After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam. The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form. The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio. The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%. The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm� and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose Facts of Indian Alfalfa The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs. The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa. Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig
Wood pellet Wood pellet is a solid fuel that is produced by crushing and densifying waste timber like sawdust, forestry residues, forestry wastes. The length is 1-4cm and the diameter is generally 6, 8, 10, or 12mm. It is possible to produce 25mm wood pellet at maximum. In Sweden, 6mm wood pellet is encouraged to use in house as it can realize the best condition of combustion. Wood pellet production doesn't need to add binder as lignin, an element of wood, plays a role of binder and helps to pelletize when it is melted by heat.
WOOD PELLETS HS Code 84748090 PRICE = US$300/TON CIF ORIGIN: THAILAND PACKAGE: 65 x 15 kg bags on pallet, in total (975 kg)/ 24 pallets on a semi-trailer MIN ORDER:200 TONS DESCRIPTION BioHansawood pellets have been specially produced for heating. It is biosecure and burns well in pellet stoves. Quality standards of 6 mm or 8 mm Enplus1 premium pellet Pellets have a lenght of 5-20 mm, diam. 6 mm or 8mm Sulphur contained less than 0,05% Energy content approx. 4,8 kWh/per kg Ash contect less than 0,5% Bulk density more than 650 kg/m