We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer and supplier of Whitening Agent Optical Brighteners for pulp and Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where Whitening Agent BRIGHTOMNI BBU Powder & Liquid come in. We supply Tetra Sulpho and Di Sulpho Optical Brighteners in Liquid and powder form. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brighteners Available for Paper application like... Optical Brightening Agent BRIGHTOMNI BBU-L in Liquid form, Optical Brightening Agent BRIGHTOMNI BBU-P in powder form, Optical Brightening Agent BRIGHTOMNI UP Liquid Optical Brightening Agent OBA 24 in powder form Fluorescent whitening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry. We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in. The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper. We have various Whitening Agent Optical Brightener Available for Paper application like... Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form. Additional Information Physical Appearance : Greenish-Yellow Powder CAS No.: 16470-24-9 EINECS No.: 240-521-2 Specific Gravity / Bulk Density : 0.8-1.0 pH of Liquid or 1% Solution : 8-9 Strength by 100% : 100% Shade/Hue: Bluish white Whiteness/ Brightness : Equal to Std % of Active Substance : 21.95% Absorbance (18mg/l) : 0.217 Moisture Content : 2.40%
With the product name "SOFTOMNI 2000" is a proprietary formulated alkaline sizing agent. ALKYL KETENE DIMER (AKD) emulsion, designed to size the paper in the neutral to alkaline ph range of 6.5 to 8.5 SOFTOMNI is a free flowing white emulsion stable to size any type of furnishes preferably containing calcium carbonate. Different type of furnishes require different application method and dosages. SOFTOMNI 2000 is added as such (can be diluted with water to the maximum extent of 1:3 ratio) in the thick stock by diaphragm type of dosing pump. Addition of SOFTOMNI 2000 before filler is preferable to get best sizing effect. The efficiency of ALKYL KETENE DIMER depends on the retention and drainage aid program. The higher the drainage, first pass retention and first pass ash retention, optimum is the efficiency of AKD. A cationic scavenger in necessary where there is high levels of anionic trash in the furnish like deinked pulp.
BRIGHTOMNI BBU-L is a Tetrasulpho type optical whitener used in Paper size press, coating and wet end applications,to achieve high whiteness and brightness properties of Paper. BRIGHTOMNI BBU-L Liquid is special Optical Brightener of medium affinity Tetra Sulpho OBA for paper. It is an innovative OBA for the WET END application in acidic to neutral media (pH 4-7). BBU-L has a broad spectrum of application and has good compatibility with Acids & Alum. Average dosage 0.2 to 6.0 g/L with size press liquor. BRIGHTOMNI BBU-L can perform with conventional Starch at the size press. Also together with CMC, PVA and anionic and slightly synthetic sizing additives. It can be a ready use optical whitener in size press. This product is used to attain moderate to high whiteness.
STRENGTHOMNI 6033 is a cationic polyamide wet strength resin supplied as an aqueous solution containing 30%++ solids. When applied under acidic or alkaline stock conditions, STRENGTHOMNI 6033 will efficiently increase the wet strength properties of finished paper or paperboard products. STRENGTHOMNI 6033 resin is highly effective for developing wet strength in facial tissue, napkins, towels, carrier board, liquid packaging, bag paper, linerboard, medium, and other specialty papers. STRENGTHOMNI 6033 performs over a broad pH range of 4.0 9.0 (with best efficiency between 6.5 - 8.0) in the presence of normal papermaking additives. Apart from this, we also produce AKD Sizing Agent, SAE Anionic for Sizing, Fixing Agent / Coagulants, Optical Brightener.
With our product name BONDOMNI 420 G, We produce SAE Anionic Surface Sizing Agent. Since BONDOMNI 420 G is anionic can be used in combination with weakly cationic auxiliaries. Application of BONDOMNI 420 G in the size press changes the wet ability of the Paper and reduces its water absorption. The presence of aluminium ions in the base Paper is not necessary for obtaining optimum results. Since BONDOMNI 420 G is anionic, it can be applied in the size press with fluorescent whiteners, direct dyes or basic dyes. The normal drying temperatures on the Paper machine are sufficient to develop full sizing. No additional curing period is required. It has good stability in the presence of large quantities of electrolytes.
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
The potential uses of lignocelluloses are in pulp and paper industries, production of fuel alcohol and chemicals, protein for food, and feed using biotechnological means. For price, specifications and more details please contact us
Hindalco manufactures coarse alumina hydrate, metallurgical alumina, special alumina and alumina hydrate. The chemicals business focuses on special alumina and alumina hydrates, which are products of in-house technological innovation by our Research & Development team at Hindalco Innovation Centre-Alumina(HIC-A). This research centre is recognised by the Department of Scientific & Industrial Research (DSIR), Government of India. The chemicals business serves a wide range of customers across 32 countries around the world with special alumina and alumina hydrates. Alumina hydrates find use in applications like alum, poly aluminium chloride (PAC), zeolites, aluminium fluoride, and as fire-retardant filler in polymer composites. Our special alumina finds a good suit in applications like refractory, ceramics, polishing compounds, abrasives and glass. Hindalco's captive bauxite mines in the Indian states of Maharashtra, Jharkhand, Chhattisgarh, and Odisha, supply high quality raw material to our refineries located at Belagavi in Karnataka, Muri in Jharkhand and Renukoot in Uttar Pradesh, India. The alumina refineries at Belagavi, Muri and Renukoot have installed capacities of 350,000 TPA, 450,000 TPA and 700,000 TPA respectively. The state-of-the-art alumina refinery at Belagavi is dedicated to the manufacture of special alumina and alumina hydrates. Utkal Alumina International Limited (UAIL), the fully-owned subsidiary of Hindalco Industries located in Rayagada district, Odisha, operates a most modern 2.1 MTPA alumina refinery.
We deals in the following Chemicals :- Calcium Carbonate Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
(i) Boric acid (ii) Borax (iii) Magnesium sulphate (iv) Corn Starch (v) Dextrose anhydrate (vi) Sodium Chloride (vii) Sodium Benzoate (viii) Ammonium Chloride & more.
Overview : LGS-P-CSS20 product boasts excellent film-forming ability. It can form a waterresistant layer on the surface of paper and cure rapidly, thus demonstrating agreat sizing effect. Besides, it has the benefits of small usage amount, lowcost, and it is easy to use, making it an ideal and wide application to writingpaper, packaging paper, wood-free paper, copying paper, coated art paper,high-strength corrugated paper, Kraftliner board and etc. The product may replace partor all of internal sizing agent, hence lowering the cost of sizing. Itdemonstrates a great sizing effect after surface sizing. Since the sizing is maintainedon the surface of paper, the paper is thus endowed with excellent waterresistant property. The application of this product greatly improves thesurface strength and printability of paper, ensuring high fidelity, good gloss,dimensional beauty and significantly avoids picking, linting and pasting platein printing. It can be widely used in different surface sizing equipment. Whenused in conjunction with starch, excellent surface strength, stiffness andwater resistance can be ensured. The product also boasts great mechanicalstability and produces little foam, hence no antifoam agent is needed. General Properties : Chemical Description : Styrene Acrylate Copolymer Iconicity : Cationic Solids : 27-30% Density : 1.02 to 1.06 g/cm pH Value : 3-5 Advantages : Technical Application Surface sizing in the size press film press of similar units Advantages of LGS-P-CSS20. 1) Can be combined with anionic weakly cationic and nonionic auxiliaries 2) Sizing is stable easy to handle 3) Low viscosity easy to handle 4) No foaming of the size press solution 5) It does not impart wet strength to the paper allowing broke to be repulped without problem Surface sizing with LGS-P-CSS20offers the Following Advantages over internal sizing 1) Improves the toner adhesion 2) Improvement in ink jet printability 3) Reduces dusting and picking 4) Produces strong paper e g higher bursting strength and tonsile strength 5) Level of sizing can be corrected faster 6) No deposit on paper machine felts screens and white water copyright © 2019 LGS | Developed By JustPage.in
Overview : LGS-P-SSA20 IS Surfsce Sizing AGENT IS Designed Specifically to meet requirement in sizing promoting for medium and liner paper. Although, starch is widely used in surface sizing and it does improve surface strength and ring crush, but is has no thing to do with sizing performance , i.e. cobb, so an additional sizing agent must be added to the starch system either to get a higher sizing effect or to further reduce sizing agent in the wet-end. With LGS-P-SSA20 Sizing effect can easily be got, that means a more stable paper quality in every roll. General Properties : Appearance : Slight Brown Liquid Composition : Anionic Actylic Copolymer Dispersions Ionicity : Anionic Solid Conent : 28-31% pH Value : 4-6 Approx LGS-P-SSA20exhibits good compatibility to surface sizing starch solution Including oxidized starch, APS converted starch and HPO converted starch. LGS-P-SSA20 NTP-SS 200 is stable to wet-end chemicals, such as Alum that always leaches Out to the starch solution and may cause flocculation to anionic Chemicals, but alum causes no harm to LGS-P-SSA20 LGS-P-SSA20 is a non-foaming chemical, and causes no froth in the Recycling Starch solution, so it can be used in various surface sizing system, e.g. Size-press,sym-size. gate-roll, etc. LGS-P-SSA20 imparts anionic nature to the surface starch solution and Henceforth improves the retention of the said starch solution on the Paper Surface LGS-P-SSA20 Is very quick in curing so after dryer the paper shows good cobb Size immediately LGS-P-SSA20 is very low corrosive, and so not harmful to paper machine. Application : LGS-P-SSA20 is usually applied in the size press imetering size press in combination with starch, but it can also simply be diluted with water It can be added in batches or continuously, the latter method heing more Versatile in that it eriables levels of addition to be adjusted more quickly as circumstances demand The paper does nol necessarily have to be sized at the wet end before LGS-P-SSA20 is applied but this can be an effective means of controlling the extent to which the size solution is able to penetrate. Between 5g/land 20g of LGS-P-SSA20 are required for had sized paper depending On factors such as whether any size is added at the wet ond, etc. it can be combined with starch in concentration between 20g/l and 130g1.
We supply solvents such as: phenol, acetone, toluene, formaldehyde, mixed xylene, mma, maa, styrene monomer, vam, bam, ipa, urea (tg), ortho xylene, hexane, cyclohexanone along with others..Global distribution services.
Precipitated Calcium Carbonate (PCC) is synthetic calcium carbonate. It is white ultra-fine crystalline powder having consistent Particle Size Distribution and Excellent dispersibility. Precipitated Calcium Carbonate (PCC): High Purity lime stone is calcined in Lime Kiln to produce quick lime which is slaked and further carbonated to produce PCC slurry, which is filtered and dried to produce pure white PCC Powder. Activated Calcium Carbonate (ACC): Activated Calcium Carbonate is produced by surface coating the Precipitated Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent. Filtering and drying of the coated PCC slurry to produce ACC Powder. The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time. Price: INR 5,000/- to 20,000/-
