Coil Coated Aluminium Aluminum coil coating is a kind of polyester coating coil. It has the characteristics of high weather resistance, which can effectively improve the anti-ultraviolet ability and prolong the service life of outdoor use. Painted Aluminium Coil Painted aluminium coil is an industrial process used to produce pre-coated aluminum coils. Different types of coatings are available: anodized, painted, liquid or powder coating. This method is used to promote the use of aluminum in most environmental conditions. For this reason, the application of coil coating involves two major industries: architecture and interior design. Painted aluminium coil is the process of applying a protective layer or coating to aluminum coils or sheets. The coating is typically applied using a continuous coil coating process, in which the aluminum is passed through a series of coating stations on a continuous production line. The coating material is applied to the aluminum using a variety of techniques, such as roll coating, spray coating, or electrostatic coating.
Pre Painted Aluminium Coil Pre-painted aluminum coil, also known as pre-coated aluminum coil or pre-finished aluminum coil, refers to a sheet of aluminum that has been coated with a layer of paint or a specialized coating before it is used in various applications. This pre-coating process offers several advantages, including enhanced durability, aesthetics, and corrosion resistance. Here are some key points about pre-painted aluminum coils Coating Types: Pre-painted aluminum coils can be coated with various types of paints or coatings, including polyester, polyvinylidene fluoride (PVDF), or other specialty coatings. The choice of coating depends on the specific application and the desired properties, such as weather resistance or adhesion. Color Variety: Pre-painted aluminum coils are available in a wide range of colors and finishes, allowing for customization to match specific design requirements. This makes them popular in the construction, architectural, and automotive industries. Application Areas Construction: Pre-painted aluminum coils are often used for roofing, wall cladding, and exterior architectural elements due to their durability and aesthetic appeal. Transportation: They are used in the manufacture of trailers, buses, and other vehicles due to their lightweight nature and resistance to corrosion. Appliances: Pre-painted aluminum coils can be found in household appliances, such as refrigerators and air conditioning units. Signage: They are commonly used for signage and displays because of their ability to hold vibrant colors and graphics. Processing: Pre-painted aluminum coils are typically produced in a coil coating process. In this process, the aluminum coil is cleaned, treated with a primer, coated with the desired paint or coating, and then cured to ensure adhesion and durability. Advantages Corrosion Resistance: The coating protects the underlying aluminum from corrosion and oxidation. Aesthetic Appeal: Pre-painted aluminum offers a wide range of colors and finishes, making it visually appealing. Durability: The coating enhances the overall durability and lifespan of the aluminum, reducing maintenance requirements. Lightweight: Aluminum is naturally lightweight, making pre-painted aluminum coils suitable for applications where weight is a concern. Environmental Considerations: Many pre-painted aluminum coatings are formulated to be environmentally friendly, with low VOC (volatile organic compound) content, which is beneficial for sustainability.
Painted Aluminum Coil Painted aluminum coil refers to an aluminum coil that has been coated with paint on one or both sides. The paint is applied to the aluminum coil in a continuous process, creating a uniform finish. Painted aluminum coil is used in a variety of applications, including building and construction, automotive, and transportation industries. It is known for its durability, corrosion resistance, and ability to withstand harsh weather conditions. Application Painted aluminum coil has a wide range of applications. Some of the most common include: Building and construction: Painted aluminum coil is often used as a finish material for walls, roofs, and other building components. It is lightweight, durable, and resistant to corrosion, making it an ideal choice for both residential and commercial construction. Automotive: Painted aluminum coil is used in the manufacturing of cars, trucks, and other vehicles. It is used for body panels, trim, and other components. Transportation: Painted aluminum coil is also commonly used in the transportation industry, particularly in the manufacturing of buses, trains, and other forms of public transportation. Home Appliance: Painted aluminum coils are widely used in home appliances such as refrigerator, air conditioner, oven, and microwave. Advertising: Painted aluminum coil is widely used for signboard and billboards for their durability and weather resistance. Others: Painted aluminum coils are also used in a wide range of other applications, such as in the electrical, furniture, and packaging industries.
One of the largest integrated primary producer of aluminium in Asia. With a pan-Indian presence that encompasses the entire gamut of operations, from bauxite mining, alumina refining, aluminium smelting to downstream rolling, extrusions and recycling, Hindalco enjoys a leadership position in aluminium and downstream value-added products in India. Our Indian aluminium operations are integrated and consist of bauxite mining, alumina refining, smelting and converting primary metal into value-added products. We have dedicated sources for critical raw materials such as bauxite, power and coal. We also have committed supply sources for auxiliary chemicals. Our finished products include alumina, primary aluminium in the form of ingots, billets and wire rods, value-added products such as rolled products, extrusions and foils. Metallurgical alumina is used for our own captive needs. Chemical alumina and hydrates are used in range of industries including water treatment, fillers in cables and plastics, refractories and ceramics, glass among others. Our facilities are in regions close to raw material sources, low cost and available labour and demand markets. This helps in reducing costs and improving profit margins. The technology upgrade has resulted in higher utilisation rates at our plants and improved efficiency. We believe implementation of superior technology not only reduces costs but also provides superior and customised products, thus, improving our sales. Hindalcoâ??s integrated complex at Renukoot, in Uttar Pradesh, India, houses an alumina refinery, an aluminium smelter and facilities for the production of semi-fabricated products. Power is sourced from our Renusagar power plant, located about 45km from Renukoot. Our facilities also include an aluminium smelter and an aluminium FRP facility (for rolled products, extrusions products and wire rods) at Hirakud (Odisha) with a captive power plant and coal mine, and alumina refinery at Muri (Jharkhand). Our Chemical grade alumina plant is located at Belagavi (Karnataka), and rolling mills at Belur (West Bengal), Taloja near Mumbai and Mouda near Nagpur (Maharashtra). Foil rolling facility is situated at Mouda near Nagpur (Maharashtra) and our extrusion plant at Alupuram (Kerala). Hindalco's new age smelters at Aditya (Odisha) and Mahan (Madhya Pradesh), operating on state-of-the-art AP36 technology, have not only resulted in expansion of our capacities but also improved cost-efficiency of our operations. These smelters have their own captive power plants and source alumina from Utkal, our 100% subsidiary. Utkal Alumina (Odisha) is a world class refinery with one of the lowest cost structure in the world. The bauxite for Utkal is sourced from Baphlimali mines by a 18 kilometer long conveyor, one of its kind in the world.
Painted Aluminum Coil Supplier/Manufacturer Painted aluminum coil is a type of aluminium sheet that has been coated to improve its appearance and durability. Painted aluminum coil meets specific industry standards. It is available in a variety of alloys including AA1100, AA3003 and AA3105. The coil has a vivid colour scheme that matches every RAL shade. Coating options are available in thicknesses from 5 to 65 microns and include PE, HDPE, PVDF. Litong is a specialist manufacturer of colour coated aluminium coils. We have been in the colour coated industry for over 20 years. The most reliable, efficient, high quality and environmentally friendly production process. Colour coated aluminium coils are widely used in a variety of industries, including construction, fuel efficient cars and home appliances. They are also easy to handle. Painted aluminum coil has the following advantages Corrosion resistance Formability Weldability Electrical conductivity Benefits Corrosion Resistance: Aluminum's natural oxide layer provides excellent corrosion resistance, ensuring long-term durability and performance. Energy Efficiency: Aluminum's reflective properties help reduce heat absorption, resulting in increased energy efficiency and lower cooling costs. Recyclability: Aluminum is a highly recyclable material, making it a sustainable choice for environmentally friendly building projects.
Painted Aluminum Coils Painted aluminum is typically available as 3105 alloy. 3105 has many similar properties to 3003 and can be used in a variety of ways. Industries that use painted aluminum include: sign manufacturers, decorative uses, labels and trailers. Litong can provide you with painted aluminum in stock or contract quantities. Send us your paint specifications today and see how Litong can help. Product Parameter 1. Types of alloy, metal thickness and color of Polyester/PUPA (Anti-Scratch) Painted Aluminium Stripes: Alloy: 3105/3005/3003 Temper: H18, H24, H26 Popular Thickness: 0. 60mm, 0.65mm, 0.68mm, 0.88mm, â?¦. Our coating capacity: 0.024mm~1.5mm Popular Aluminium Slats Width: 214mm, 262mm, 321mm, 383mm, 490mm, 650mm, 584mm, 750mm, ... Our coating & slitting capacity: 15mm~1600mm Popular Color: White, Silver, Anthracite Grey, Brown, Wooden texture, We can follow any color of RAL K5 & K7, Pantone, or clients customized colors
PVDF Paint Aluminum Coil PVDF color coated aluminum trim coil is a high quality alloy and smooth color coated aluminum trim coil. After cleaning, chrome plating, rolling, baking and other production processes, the aluminum surface is coated with various colors of paint. PVDF color coated aluminum trim coils are used to enhance the exterior of houses and provide them with additional protection against various types of weather. PVDF Color Coated Aluminum Trim Coil is used to enhance the exterior of a home and provide it with additional protection against various weather types. It is primarily used to create coverings for soffits, window trim, roof flashing, and any wood that is exposed to the outdoors.
Painting aluminum trim coil at home and in workshop Painting aluminum trim coil at home and in workshop â??Painting aluminum trim coilâ?? is often asked about since aluminum siding and trim has been applied in decoration of so many houses in the past years. Learning about painting process in the workshop helps you to fully understand steps you should do at home to repair items made of trim aluminum coil. Before getting an aluminum trim coil roll painted, manufacturers would first clean the roll surface completely, either in physical or chemical ways. Sometimes mechanical equipment is necessary, too. The purpose is to remove any materials that might prevent the following anodizing step from going on effectively. A completely cleaned surface of aluminium coil will obtain a thick condense layer of anodizing film on the surface, but there will be micro holes on the surface, which should be concealed to make the film stronger and harder. To paint the coil, pvdf, pe and pvc paints are all applicable. These paints are divided into primers and finishing coats. Multiple painting produces lasting color coated aluminum coil in severe natural conditions. If you need to paint aluminum trim coil at home, the steps are similar in exception to the anodizing part. You should first scrub the aluminum part to be painted with soapy water by combining 1 gallon of warm water and 1/4 cup of dish soap in a bucket. Then then scrub down the entire aluminum surface to remove dirt and residue with the brush soaked with soapy water. Wipe the aluminum with a clean, damp cloth, and if there are still residues on the aluminium surface, brush it again until it gets fully cleaned. After the surface gets dry, you should begin your painting. Now the point is, do you need a primer? If you want your paint work last as long as possible, the answer is yes, for a primer functions as a secondary protection line of the aluminium trim coil. Make sure the primer you choose is safe for use on aluminum. Do not move on the next step until the primer is dry. Then dip a paintbrush into the paint, and brush the paint onto the aluminum using long, even strokes. Never allow anyone touch the aluminium until the paint gets dry.
Painted Aluminum Coil Painted Aluminum Coil is a type of coated aluminum coil that is treated with a polyester resin. The coil is first coated with a primer, which helps to ensure good adhesion between the aluminum surface and the polyester resin. The polyester resin is then applied to the surface of the coil using a special roller coater. Painted Aluminum Coil is widely used in various industries such as construction, transportation, and electronics, due to its durability, weather resistance, and excellent color retention properties. It is also known for its low maintenance requirements and cost-effectiveness. The polyester resin used in the coating is a thermosetting resin that cross-links and cures when exposed to heat. This process creates a durable, hard-wearing surface that is resistant to scratches, chipping, and fading. The polyester paint coating also provides protection against UV radiation and other environmental factors that can cause damage to the aluminum surface. Advantages of Painted Aluminum Coil: Durability: The polyester paint coating provides a durable, hard-wearing surface that is resistant to scratches, chipping, and fading. Weather Resistance: Polyester painted aluminum coil is highly resistant to weather conditions, including UV radiation, extreme temperatures, and humidity. Color Retention: Polyester painted aluminum coil has excellent color retention properties, which means that the color of the coil remains vibrant and does not fade over time. Low Maintenance: The low maintenance requirements of polyester painted aluminum coil make it a cost-effective choice for a wide range of applications. Cost-Effective: Polyester painted aluminum coil is a cost-effective alternative to other materials such as stainless steel or copper, which can be more expensive. Applications of Painted Aluminum Coil: Construction: Painted Aluminum Coil is widely used in the construction industry for building facades, roofs, and other architectural applications due to its durability, weather resistance, and excellent color retention properties. Transportation: Painted aluminum coil is used in the transportation industry for the manufacture of trailers, truck bodies, and other vehicles due to its lightweight, durability, and weather resistance. Electronics: Painted aluminum coil is used in the electronics industry for the manufacture of electronic enclosures, cases, and other components due to its electrical conductivity and corrosion resistance.
Aluminium Coil for Roofings PVDF Coated Aluminium Coil PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity. Key Features of PVDF Coated Aluminum Durability: PVDF coated aluminum is resistant to weathering, UV radiation, and corrosion, making it suitable for use in a variety of outdoor applications.
Aluminium Coil for Roofings PVDF (polyvinylidene fluoride) coated aluminum coil is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum coil is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum coil is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF Coated Aluminium PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays. PVDF Application Process There are several steps involved in the PVDF (polyvinylidene fluoride) coating process: Surface preparation: The surface of the aluminum must be properly cleaned and treated to ensure that the PVDF coating adheres properly. This may involve degreasing, sandblasting, and/or etching the surface. Priming: A primer coat is applied to the aluminum surface to help improve the adhesion of the PVDF coating. Applying the PVDF coating: The PVDF coating is applied to the aluminum surface using a variety of methods, such as spraying, roller coating, or curtain coating. Drying: The coated aluminum is then placed in a drying oven to allow the PVDF coating to cure and harden. Quality inspection: The coated aluminum is inspected to ensure that it meets the required standards for thickness, appearance, and performance. Packaging and storage: The coated aluminum is then packaged and stored until it is ready to be shipped to the customer. It is important to follow proper handling and storage procedures during and after the PVDF coating process to ensure that the coated aluminum maintains its optimal performance and longevity.
PVDF (polyvinylidene fluoride) coated aluminum is a type of coated aluminum that has a PVDF resin coating applied to its surface. This coating provides the aluminum with excellent resistance to weathering, UV radiation, and corrosion. It is also resistant to stains and is easy to clean, making it suitable for use in a variety of applications. PVDF coated aluminum is commonly used in the construction industry, particularly for cladding buildings and other structures. It is also used in the manufacture of roofing, siding, and flashing, as well as for window and door frames. PVDF coated aluminum is also used in the transportation industry, for applications such as aircraft and automotive parts. It is also used in the production of signage and other types of visual displays.
Polyester powder coated aluminium is a type of coated aluminum product that is used in a variety of applications, including in the construction and transportation industries. It is produced by cleaning, pretreating, and coating the surface of an aluminum substrate with a paint or other finish. The paint or finish is applied using a continuous coil coating process, which involves passing the aluminum coil through a series of rollers that apply the paint or finish to the surface of the metal. Polyester powder coated aluminiuml can be used to create a wide range of products, including roofing and siding panels, rain gutters, garage doors, window frames, and more. It is a durable and low-maintenance material that is resistant to corrosion and weathering, making it an excellent choice for outdoor use. Painted aluminum coil is also easy to work with and can be cut, bent, and shaped to meet the specific needs of a project.
The metal and aluminium coils in Litong products are made from the highest quality materials. We require our suppliers to adhere to the strictest standards and use a rigorous qualification process when selecting new sources. All of our metal roofing coils and sheets are produced from recycled materials, with at least 25% of the raw material coming from post-consumer or post-industrial waste. With our world class paint lines, we maintain fully integrated manufacturing capabilities to ensure the highest level of quality control. Stock strengths of various forms of aluminium range from specification 1100-0, which has a yield strength of approximately 5,000 psi, to specification 7075-T6, which has a yield strength of approximately 70,000 psi. (per square inch).
Water Paints
Paint production involves the formulation and manufacturing of high-quality coatings designed for durability, aesthetics, and protection. Using advanced technology and a variety of finishes, the process caters to diverse applications, including residential, industrial, and commercial surfaces.
Aluminium ubc scrap.Transport, shipping
Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Color: silver white
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
