P + F encoder RHI90N-0NAK1R61N-01024 new in box
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
100% Pure Yellow Beeswax Bars For DIY Craft And Candles ISO Certified Basic Information Place of Origin: Henan, China (Mainland) Brand Name: Super-Sweet Certification: ISO, HACCP, FDA, GMP Model Number: SS1001 Minimum Order Quantity: 1000KGS Price: $5.9-7.9/KG Packaging Details: 25KGS/BAG Delivery Time: 7days Payment Terms: T/T, L/C, Wester Union, Cash, D/P, D/A Supply Ability: 2000TONS Product Description Filtered (100% Pure) 1lb. Beeswax Bars for DIY Craft and Candles Product Description Product Name beeswax bar Color Natural Color Size 7.5x2x1.3cm Material beeswax MOQ 500 kg Supply ability 50000 pieces per month Sample time 7-10 working days Delivery time within one month after order confirmation Payments L/C, T/T, Western union, paypal Beeswax is a secretion of the abdominal glands of the honeybee,which is used for building its hexagonal combs within the hive. Wax is collected by removing a portion of the hive's capping and the refined for use in wide variety of applications. A bee consumes an estimated 6 10 lbs (3 4.5 kg) of honey for each pound of the wax it secretes. After honey removal, the comb is melted to produce the beeswax. Our beeswax is hand packaged in 1 pound,sealed bags and ready for you to use. Beeswax has a high melting point range, of 62 to 64 C (144 to 147 F). If beeswax is heated above 85 C (185 F) discoloration occurs. Use this wax in creams & lotions for extra body, in balms and body butters for stiffness and rigidity and in soaps and candles for hardness. See recipes belows for fun projects with Beesworks Beeswax! SUPER-SWEET sources crude beeswax from thousands of beekeepers throughout the China, the relationship with our qualified beekeepers is personal, trusted and long term association. APPLICATIONS INCLUDE: Cosmetics, Creams, Glamour Products, Lotions,Pharmaceuticals,Ointments,Tablet Coatings,Candles, Confections,Hard Shell Candy Coatings, Wood and Floor Polishes. BEESWAX FROM OTHER ORIGIN OF COUNTRY BEESWAX-SYNTHETIC BEESWAX-SUBSTITUTE BEESWAX-CUSTOMIZED
Product Name: Mono-Di Calcium Phosphate "Type: Feed Additives Origin: China CAS No.:10031-30-8 AUCO No.: 325 Packing: 25kg bag" Items Standard Appearance White crystal Total Phosphorus (P) % >21.0 Relative solubility of Phosphorus in Citric Acid 2% % >90 (P) Water-Soluble Phosphorus % >60.0 Calcium,Ca % >14.0 Fluorine,F %
Product Name: Mono-Di Calcium Phosphate Type: Feed Additives Origin: China CAS No.:10031-30-8 AUCO No.: 325 Packing: 25kg bag Items Standard Appearance White crystal Total Phosphorus (P) % >21.0 Relative solubility of Phosphorus in Citric Acid 2% % >90 (P) Water-Soluble Phosphorus % >60.0 Calcium,Ca % >14.0 Fluorine,F %
Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications. Product Description Packaging & Delivery Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle. For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client. Delivery Detail: 20-30days Specifications Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO) IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile CAS RN: 14816-18-3 EC No.: 238-887-3 PHYSICAL CHEMISTRY Mol. Wt.: 298.3 C M. F.: C12H15N2O3PS Form: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 C) K OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C) Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation. MAMMALIAN TOXICOLOGY Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22 ECOTOXICOLOGY Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. APPLICATIONS It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Conveying system, bottle warmer, head space sterilizing system, showering & cooling system, film shrink wrapper, robot encasing machine, robot palletizer, low-level palletizer.
Vermeer horizontal directional drill Multiturn Absolute encoder NIB P+F It fits the following Vermeer horizontal directional drill Vermeer part number 296276165 Pepperl + Fuchs part number 514892 100X120 II 100X140 220X300 36X50 DR 60X90 80X100 II 36X50 II
Crude degummed rapeseed oil(din51605) Density(15 oc) kg/m³ 900-930 din en iso 12185 Flash point p.-m oc min. 220 din en iso 2719 Cinematic viscosity(40 oc) mm²/s max. 36, 0 din en iso 3104 Oxid ash content % (m/m) max. 0, 01 din en iso 6245 Water content k.-f. Mg/kg max. 750 din en iso 12937 Flaxi tank
ENC3140 4 to 1 H.264 SD encoder is broadcasting-level DVB standard encoder which high reliability and advanced compressing arithmetic. This encoder adopts the advanced circuit and embedded clock correct circuit, which reduce the signal programs needs and make sure to achieve excellent picture with very lower bitrate signals. It uses leading-edge compression technology H264/AVC and a variety of audio coding algorithm, It widely can be used to support IPTV,digital Cable/Terrestial/satellite standard,video surveillance applications. In addition, the ENC3140 provides one of the higher compression efficiencies in the broadcasting,making it possible to transmit high quality video content at the lower bandwidth. Main Application: * Digital TV head-end system * IPTV,Over-the-air TV distance learning * Remote live Rebroadcasts and real-time transmission Key Features: * Support for IP unicast and multicast network * DVD quality in IP networks transmit video and audio encoding to support the minimum bandwidth of 0.5Mbps,but in order to make the encoded image quality even approaching perfect, we usually recommend customers to use in more than 1.0Mbps bandwidth * Support local and remote control network, and also support network upgrade * Each channel encoding SPTS has its own individual UDP-IP mapping (optional) * Variable PCR re-correcting for different network * Input video format (PAL / NTSC) adaptive selection, Embedded analog composite video, dual sound, stereo input * Built-in time base correction and video pre-processing * PID modifying and PSI/SI generating Inputs * Video: level: 4x CVBS 1.0Vp-p, Impendence: 75 Formats: NTSC/PAL * Audio: level: 8x R/L analog audio 2Vp-p, Impendence: 600 * 2 way ASI interface input multiplexing with other encoding channel(optional) * Connector:BNC Outputs * DVB Interface: 2x ASI , Comply to EN 50083-9 ASI Standard, BNC, 75 * Output Format: 188bytes * Output Rate: Single Encoder 0.5~15 Mbps * IP output: 100M Base-T Ethernet interface UDP output, Multicast or Unicast, support 1-4 SPTS or MPTS Encapsulation UDP-IP * Connector: BNC Video Encoding Features * Comply to the International standard:H.264/AVC Main Profile,Level 3.0 * Input Video Format:576i(PAL)¡ê¬480i(NTSC) * Spatial preprocessing * Scene change detection * Bit rate mode¡êoVBR/CBR Audio Encoding Features * Sampling Rates: 32KHz, 44.1KHz, 48KHz * Bit rate: 32, 64, 128, 192, 256, 384kbps * Encoding Format: MPEG I Layer I/II,CD quality * Quantization:24bit Managemnet * 10/100 M Base-T Ethernet, RJ45, SNMP and OTA * 6 keys: UP, DOWN, LEFT, RIGHT, ENTER and ESC * Front-Panel lcd configuration * Video/audio configuration * LED indicate light Environment * Comply to GB13837-92 & GB8898-88 standard * Power Supply: AC 90-250V 50/60Hz * Power consumption: 30 W * Operating temperature:-10 - 50C Packaged in standard cartons. Size: 53*46*14cm .
Kv-ec101&ec101a is a hd video network encoding transfer product with high performance. It¡¡¥s of reliable Fc1889/rfc2326 ); 12. Compatible with onvif 1.1/2.0 specification, easy to integrate with nvr and software management system; Technology features: InterfaceVideo input1*bnc sdi Video looping out1*bnc sdi Analog audio inputKv-ec101: 1* industrial terminal blocks, unbalanced connection Kv-ec101a: 1*3.5mm audio interface Analog audio output Kv-ec101: 1*industrial terminal blocks, unbalanced connection Kv-ec101a: 1*3.5mm audio interface Alarm signal1* industrial terminal blocks Rs-4851* industrial terminal blocks Network1*rj-45, 10/100m ethernet Power supplyDc 12v, 2a (external power supply) SignalSdi signal amplitude0.8vp-p Sdi impedance75 ohm Sdi coupling typeAc Output signal typeSd-sdi(270mbps)¡¡éhd-sdi(1.485gbps)¡¡é3g-sdi(2.97gbps) Supported formats1080p24/25/29.97/30¡¡é1080i60/59.94/50¡¡é720p60/59.94/50 EncodingVideo codecH.264 high profile( up to level 4.1 ) Audio codecAac-lc, g.711(u-law/a-law) Encoding delay¡¨¹50ms Video encoding bitrate512kbps ~ 30mbps are adjustable Audio encoding bitrate64kbps TransmissionMedia transport protocolRtp/rtsp, compatible rtp over tcp transmission mode Control signal exchange protocolTcp Network management protocolHttp / windtalk (exclusive protocol) ManagementManagement interfaceWeb Remote managementSupports, compatible with onvif 1.1/2.0 Remote firmware upgradeSupports Operation environmentOperation temperature0¡æ ~ 80¡æ Relative humidity 20 ~90%rh(non-condense) Overall unit power dissipation 5w Outer carton dimensions:26*24*8 cm Weight: 1.2 kg Packing: package by carton
ENC3048 is broadcasting-level MPEG-2/MPEG-4 DVB standard digital video encoder which high reliability and advanced compressing arithmetic. Compression encoding process according to main-level master class (MP @ ML) and MPEG-4 Level 5 ASP,It provides one of the highest compression efficiencies in the mpeg2 broadcating, making it possible to transmit high quality video content at the lowest bandwidth possible. and audio encoding can support two audio PID, produces ASI and IP output data stream, in particular, channel 3 and 4, the output rate in the system without changing the dynamic adjustment of video bit rate to ensure error-free output. Main Application: * high Digital TV front-end system * video and audio compression transmit * video surveillance and video on demand Key Features: * Video encoding supports MPEG-2 MP@ML(4: 2: 0) and MPEG-4 Level 5 ASP * Hi-Fi audio processing R / L channel, stereo input, input video format (PAL / NTSC) adaptive selection * broadcast-grade products, single coded output bit rate continuously, adjustable :1-7Mbps, support for ultra-low series MPEG-2 video compression coding, specially the channel 1, 3 could be MPEG-4 video coding * Support local and remote control of network management, support software updates * Support for audio and video input interface: Analog composite video, left and right channels * precise synchronization, timing control, AV delay ¡¨¹ ¡¨¤ 15ms, PCR jitter ¡¨¹ ¡¨¤ 37ns * Support dynamic bit rate control of moving picture * Support Each channel encoding SPTS has its own individual UDP-IP mapping (optional) * Support two audio PID within every encoding channel * Support TS OVER IP output * Support NIT table add and modify with user demand(optional) * Support program supplier and name to be rename via keyboard and SNMP Technical Specifications Video Input * Composite video signal: 1.0Vp-p level * Frequency: 25Hz;5.75MHz * Video format: NTSC(525/60) PAL(625/50) optional * Quantitative: 8bits, comply to CCIR-601 * Sampling frequency: 27MHz * Impedance: 75, unbalanced * Connector: 4 Way BNC Audio Input * Audio signals: R / L channel level 2Vp-p, impedance 600 * Sampling frequency: 32kHz, 44.1kHz,48kHz * Output Rate: 64kbps, 384 kbps * Quantitative:16bit * Connector: 8 way BNC Stream output * ASI stream output: meet EN 50083-9 ASI interface standard, BNC, 75 impedance * Single rate 1 ~ 7Mbps continuously adjustable output, the maximum output setting 40Mbps * 10/100 BaseT Ethernet interface UDP output, Multicast or Unicast capable, support 1-4 SPTS or MPTS Encapsulation UDP-IP * 188 bytes Video Coding * Comply to the International standard: ISO 11172(MPEG-1) and ISO 13818(MPEG-2) * Encoding Format: MPEG-2 4:2:0MP@ML and MPEG-4 Level 5 ASP * Adaptive field frame (AFF) * MPEG 2 on the base of FB * Operation mode: CBR/VBR * Format: DVB standard transport stream (TS) Audio Coding * Sampling Rates: 32KHz, 44.1KHz, 48KHz * Bit rate: 32, 64, 128, 192, 256, 384kbps * Support two audio PID * Encoding Format: MPEG I Layer I/II,CD quality, support four stereo or dual channel Resolution * Accordance with CCIR601 standard, support 1/2D1, 2/3D1, 3/4D1, Full HD * PAL: 720, 576, 544, 576, 480, 576, 352, 576 * NTSC: 720, 480, 544, 480, 480, 480, 352, 480 Control * 100M BaseT Ethernet, RJ45, WEB, SNMP and OTA * 7 keys: UP, DOWN, LEFT, RIGHT, ENTER, Lock and ESC * LCD in Chinese and English * LED indicate light Environment * Radiation safety requirements and comply with GB13837-92 and GB8898-88 standards * Power Supply: AC 90-250V 50/60Hz * Power consumption: 25 W * Operating temperature:-10 - 50¡ãC * Storage temperature: -10 - 75¡ãC * Dimensions: 300mm(L)X 483mm(W)X 44mm(H)(1RU) * Weight: 5kg carton. Size: 53*46*14cm.
Gearlincsystems has a world class setup in manufacturing industrial gearboxes with hardened & ground gears. categories like in line helical (foot/flange) f series parallel shaft helical , bevel helical , z type helical gearbox (i/p & o/p solid shaft ).
PHBX / TFX Geared Motor
TF - Parallel Shaft Helical Geared Motor This series is compact and easy to mount. Flange-, foot- and hollow shaft-mounted versions, or combinations of these mounting options are available. These gearboxes are of a modular design. Output shaft and flange can be mounted to standard hollow-shaft gearboxes without modification of the gearbox. The housing has mounting points on both sides, allowing mounting from either side. The hollow-shaft gearboxes have new mounting options also for the input side. Input possibilities are standard (IEC B5 or B14), direct coupled or with solid input shaft. A combination with other gearbox types is possible with minimum change. In applications where efficiency and strength are important, hollow-shaft gearboxes are preferred to worm gearboxes. Hollow-shaft gearboxes can withstand higher overhung loads than other gearbox types.
TK - Bevel Helical Geared Motor are bevel gearboxes with monoblock housing. They are intended for applications requiring higher efficiency and strength. Their input and output shafts are perpendicular to each otherBevel gearboxes can have a maximum of three stages in a single housing. Larger sizes are available only with three stages in a monoblock housing. A higher number of transmission ratios (up to six) can be implemented through the use of additional housings.
TR - Inline Helical Geared Motor have a one-piece (monoblock) housing, which has advantages in terms of rigidity, oil leakage, noise level and gear strength. The high gear quality achieved with modern manufacturing technologies is supplemented with housings made of GG20-22 material. TR - Inline Helical Geared Motor are easy to mount and flexible in usage. Depending on customer requirements direct or IEC B5 or B14 motor connections are available. All models are foot-mounted and have two or three stages in a single housing
PHB - Twin Shaft Bevel Helical Geared Motor consists of helical-geared industrial gear units with bevel stage input. Input and output shafts are perpendicular. PHB - Twin Shaft Bevel Helical Geared Motor is optimized for power density to achieve the highest rating at the smallest possible dimensions. But because high power density also means increased thermal load, the new products are provided as standard with various cooling options. Efficiency is further enhanced through the use of high-grade lubricants and sealings. Another advantage is the wide range of mounting possibilities: The units can be mounted on any side, directly to the motor flange or to the output flange, greatly simplifying their installation. Because these gear units can be mounted on any side, additional equipment, such as integrated or external forced lubrication or oil expansion tanks are available as accessories. We also offers tailored solutions for specific applications. Our standard range includes reinforced bearing arrangement or extended bearing distance for high radial load or agitator applications, backstops for single-direction applications such as conveyors or elevators, brakes for hoisting or moving applications, and shrink disks for alternating loads. Special solutions for extruder applications are provided for each size and ratio.
Atomic Number = 25 | Melting Point (F) = 2275 | Atomic Mass= 118.71 | Boiling Point (F) = 3742 | Density (g/cm3) = 7.4 | Analysis: Manganese (Mn) 99.8600%, Sulfur (S) 0.0450%, Iron (Fe) 0.0370%, Selenium (Se) 0.0200%, Carbon (C) 0.0080%, Silicon (Si) 0.0054%, Phosphorous (P) 0.0006%.
