Rice husk ash is used in the production of special high-quality steel with low thermal conductivity and density. ZRSH is added to the heat-insulating mixture to cover the mirror of the metallurgical ladle, which additionally ensures compliance with the temperature regime of continuous casting processes. Ash is used as a filler in polymers and rubbers for the production of car tires, as an adsorbent for heavy metals for wastewater treatment. In the pharmaceutical industry, ash is added to stabilize emulsions, as an agent, thickener and suspending gel in the preparation of semi-solid products, in perfumery, RHA is added as a filler for toothpastes and creams. Equally important is the use of rice husk ash as a natural source of high performance amorphous silica.
Oil and gas industry: Accelerating the process and improving the efficiency of well drilling; increasing the life of drilling equipment; drilling fluids and plug cements of low density and high strength. Construction: ultralight and ultra-lightweight concrete; high-strength and low-density thermal and acoustic insulation boards; increased adhesion of concrete or brick walls, excellent leveler. dry mortars, lime and liquid mortars, cements, plaster, insulating roof coatings and soundproofing materials - lightweight, smooth surface, low cost, heat resistant, shrinkage resistant. sensitizer for the use of emulsion BBs. paints - resistance to chemical corrosion and light, thermal insulation, smoothness. Styrofoam: Aircraft, spacecraft, ship construction - low density and moisture absorption, high mechanical properties of materials for vibration damping, insulation and thermal protection. Ceramics: Refractory materials and coatings, insulation materials. Plastics Epoxy resins: production of polyethylene - improving strength and abrasion resistance. production of bearings, cameras, furniture and its accessories - tensile strength, impact strength, hardness, resistance to heat and light. Profiled materials, pipes, plates - dimensional stability, rigidity, heat resistance; TV housings, auto parts - compressive strength, bending elasticity, shrinkage reduction.
We offer a regular supply of 3 grades of rutile TiO2 concentrate min 95% , min.TiO2 92%; min TiO2 92.5-94.0% Rutile concentrate is supplied by our company successfully applied the electrode material is produced in Ukraine, Russia and CIS countries since 2006. Rutile concentrate of min.TiO2 95% TiO2 min.TiO2 95.0% Fe2O3 max. 1.0% ZrO2 max. 1.0% SiO2 max. 1.0% Al2O3 max.0.6% Particle size: Typical (micron) D50- 148 mkm Rutile concentrate min TiO2 92.5% TiO2 min. 92.0% Fe2O3 min. 1.9% ZrO2 min. 1.0% SiO2 min. 1.7% Al2O3 min. 1.0% Particle size Typical (micron) D50-158 mkm Rutile concentrate tipical 94.2% TiO2 min 92.0% Fe2O3 min. 1.0% ZrO2 max. 1.5% SiO2 max. 1.0% Al2O3 max. 1.0% Particle size Typical (micron) D50-145 mkm Minimum quantity for the shipment of 24-26 tons. Packing: big bags 1000 and 2000 kg.Bulk-in-cont..
Product name: zircon, zircon sand, zircon concentrate Formula: ZrSiO4 (Zirconium Silicate) AS14940-68-2 Zircon sand ZrO2+HfO2 Guaranteed min.66.0% Typical 66.7% Fe2O3 max.0.06% TiO2 max.0.15% Al2O3 max.0.34% SiO2 max. 33.0% P2O5 max.0.10% Th+U 370 ppm (3.7 Bk/gr) Typical size (D 50 ) 90 mkm Zircon sand ZrO2+HfO2 Guaranteed min.65.5%-66.0% Typical 66.3% Fe2O3 max.0.10% TiO2 max.0.25% Al2O3 max. 0.45% SiO2 max. 33.2% P2O5 max. 0.12% Th+U 380 ppm (3.6 Bk/gr) Typical size (D 50 ) 103 mkm. Package: big-bags 1mt , 2mt and bulk-in-containers per fcl 24 mt.
Rutile concentrate Tio2 min 96% Big-bages 1-2 mt
glauconite concentrate (95% glauconite content) - raw materials for the production of mineral fertilizers, mineral pigment, mineral premixes, mineral sorbent, filter elements for water purification. Glauconite enriched (glauconite content 45-50%) -Ecosorbent - growing clean products in contaminated areas, detoxification contaminated with pesticides, heavy and radioactive metals, lands; creation of engineering and geochemical barriers to the spread of toxicants (heavy and radioactive elements, pesticides, oil and oil products, toxic compounds of organic synthesis; elimination of accidental releases of different types of pollutants, burial of toxic compounds, incl. chemical weapons and its components.
Our company can export monthly iron concentrate, hematite from 50,000 to 200,000 mtn, made in . Mass fraction of Fe total, 55.5 Mass fraction of Cao, 6.36 Mass fraction of SiO2, 9.52 Mass fraction of MgO, 2.00 Mass fraction of Al2O3, 1.1 Mass fraction of TiO2, 0,071 EXW delivery terms If you are interested in our offer, let us know as soon as possible
Iron ore with Fe Content 45-50% (on delivery terms of FOB Black Sea) Iron ore with Fe Content 55-59% (on delivery terms of FOB Black Sea) Test report of iron-containing raw materials No.1: Fe total - 46,21%, Fe2O3 - 65,2%, SiO2 - 31,98%, Al2O3 - 0,92%, P - 0,043%, FeO - 0,77%, CaO - 0,14%, MgO - 0,21%, TiO2 - 0,033%, MnO - 0,009%, S - 0,027%, Insoluble residue - 0,93%. No.2: Fe total - 50,56 %, Fe2O3 - 71,28%, SiO2 - 25,6%, Al2O3 - 1,05%, P - 0,039%, FeO - 0,90%, CaO - 0,17%, MgO - 0,14%, , TiO2 - 0,038%, MnO - 0,016%, S - 0,025%, Insoluble residue - 0,98%. No.3: Fe total - 55,49 %, Fe2O3 - 78,33%, SiO2 - 18,98%, Al2O3 - 0,80%, P - 0,045%, FeO - 0,90%, CaO - 0,13%, MgO - 0,21%, , TiO2 - 0,030%, MnO - 0,013%, S - 0,012%, Insoluble residue - 0,82%. No.4: Fe total - 59,84 %, Fe2O3 - 84,83%, SiO2 - 12,96%, Al2O3 - 0,65%, P - 0,055%, FeO - 0,64%, CaO - 0,11%, MgO - 0,17%, , TiO2 - 0,029%, MnO - 0,011%, S - 0,009%, Insoluble residue - 0,76%. Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.Iron ore from Ukraine with Fe content 59%. Fe total - 59,54%, Fe2O3 - 84,33%, SiO2 - 12,9%, Al2O3 - 1,01%, P - 0,012%, FeO - 0,71%, CaO - 0,14%, MgO - 0,22%, TiO2 - 0,035%, MnO - 0,025%, S - 0,01%, insoluble residue - 0,87%. Iron ore from Ukraine with Fe content 57%. Fe total - 57,3%, Fe2O3 - 79,9%, SiO2 - 15,0%, Al2O3 - 1,34%, P - 0,027%, FeO - 1,81%, CaO - 0,17%, MgO - 0,27%, TiO2 - 0,056%, MnO - 0,037%, S - 0,013%, insoluble residue - 1,81%. Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.
1. Sinter ore for a metallurgical plant. Specifications: Quantity : min 3 000 tons/month. Delivery conditions : FCA, DAP, FOB, EXW Fraction : 0-10 mm. Sinter ore with Fe Content 45-50% (on delivery terms of FOB Black Sea) Sinter ore with Fe Content 55-59% (on delivery terms of FOB Black Sea) Test report of iron-containing raw materials No.1: Fe total - 46,21%, Fe2O3 - 65,2%, SiO2 - 31,98%, Al2O3 - 0,92%, P - 0,043%, FeO - 0,77%, CaO - 0,14%, MgO - 0,21%, TiO2 - 0,033%, MnO - 0,009%, S - 0,027%, Insoluble residue - 0,93%. No.2: Fe total - 50,56 %, Fe2O3 - 71,28%, SiO2 - 25,6%, Al2O3 - 1,05%, P - 0,039%, FeO - 0,90%, CaO - 0,17%, MgO - 0,14%, , TiO2 - 0,038%, MnO - 0,016%, S - 0,025%, Insoluble residue - 0,98%. No.3: Fe total - 55,49 %, Fe2O3 - 78,33%, SiO2 - 18,98%, Al2O3 - 0,80%, P - 0,045%, FeO - 0,90%, CaO - 0,13%, MgO - 0,21%, , TiO2 - 0,030%, MnO - 0,013%, S - 0,012%, Insoluble residue - 0,82%. No.3: Fe total - 59,84 %, Fe2O3 - 84,83%, SiO2 - 12,96%, Al2O3 - 0,65%, P - 0,055%, FeO - 0,64%, CaO - 0,11%, MgO - 0,17%, , TiO2 - 0,029%, MnO - 0,011%, S - 0,009%, Insoluble residue - 0,76%. Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.
Manganese Ore (%25-28) Origin: Egypt We can supply 15.000 MT montly. For more information please contact by
Eaf dust.
Leonardite.
Currently, the most common source of copper ore is the mineral chalcopyrite (CuFeS2), which accounts for about 50% of copper production. The focus of this article is on the process of copper extraction from chalcopyrite ore into pure metal. Processes for other minerals are mentioned. Owing to our wide experience of more than one decade in this domain, we are noted entity engaged in importing, exporting supreme quality Copper Ore. The combo of its abundance and physical properties make our offered ore is more valuable in the national as well as international market. Moreover, this ore is available with us at the most competitive rates. Copper(Cu), % 25.0 Min Lead(Pb), % 5.00 Max Cadmium(Cd), % 0.05 Max Mercury(Hg), % 0.01 Max Flourine(F), % 0.10 Max Arsenic(As), % 0.50 Max Moisture(H2O), % 5.0 Max Size 0-100mm Features: Odorless High density Effectiveness General specifications of copper ore DETERMINATION (mass%) Copper 40.01% Total iron as Fe 21.60% Silicon as Si0 20.24% Total Sulphur as S 17.10% Zinc as Zn 0.01% Moisture or 105 C 1.14%
Country of Origin: Ukraine . Size: 10-100 mm (90% min) . Quantity: Approx. 500 Metric Tons per Month / or 1 (one) year contract of delivery of 10,000 Metric Tons of FeMn slag . Specification: Mn - 47% max, Si - 13.8%, S - 0.52%, Ca - 31.3%, Ti - 0.21 %, Fe - 7% . Packing: 1 MT Big Bags Delivery Terms: FOB Odessa Sea Port / Or can be discussed CIF ASWP *We are producer of these materials. Please contact directly by email/WhatsApp/Mob.T.
Country of Origin: Ukraine Size (Fractions): 0-05mm / 0-10mm / 0-20mm / 0-30mm (90% min) Quantity: 1000 Metric Tons per Month / 10 000 MT per Year Specifications: Mn - 73 C - 6,90 Fe - 8,3 S - 0,054 P - 0,185 Si - 1,61 Packing: 1MT Big Bags Delivery terms: FOB from Odessa South Sea Port / can be discussed CIF ASWP We are producer. You can contact with us by email/WhatsApp/Mob.T.
Hematite iron sand.No
Iron Ore, Magnetite Iron Ore And Hematite Iron Ore.
Other ores.
Low carbon ferrochrome 025.
Coke, coal-tar pitch, coke by-product oils, claimed soda, fluorspar.
