The OneScreen Alcohol Dip Card consistently runs faster competitive panel immunoassay that can be used for the simultaneous, qualitative detection of Alcohol (ALC) at a 20mg/dL cutoff level in human urine.
Easier to Interpret, More Accurate, and Reads Faster
99% Accuracy
24 Month Shelf Life from Date of Manufacture
Instant Results, Read Negatives within 1 minute & Positives in 5 minutes
These are screening devices only and although very accurate if you get a positive we recommend a certified lab for LC-MS/MS Confirmation. For more information dial 1-866-526-2873, or sales@americanscreeningcorp.com
These drug tests are intended for workplace testing & forensic use ONLY (not FDA cleared or CLIA waived) intended for employment and insurance testing and does not include test systems intended for Federal drug testing programs (e.g., programs run by the Substance Abuse and Mental Health Services Administration (SAMHSA), the Department of Transportation (DOT), and the U.S. Military).
The OneScreen Alcohol Dip Card consistently runs faster competitive panel immunoassay that can be used for the simultaneous, qualitative detection of Alcohol (ALC) at a 20mg/dL cutoff level in human urine.
Easier to Interpret, More Accurate, and Reads Faster
99% Accuracy
24 Month Shelf Life from Date of Manufacture
Instant Results, Read Negatives within 1 minute & Positives in 5 minutes
These are screening devices only and although very accurate if you get a positive we recommend a certified lab for LC-MS/MS Confirmation.
These drug tests are intended for workplace testing & forensic use ONLY (not FDA cleared or CLIA waived).
Applications:
Use to manufacture gypsum panel or building plasters
Use to make gypsum mold or statutes
As grout of marble, clay and ceiling tiles
As a color additive
Act as additive to other products
Types:
1. Super Micronized Gypsum Powder
2. Facade Rendering Gypsum
Packaging:
25 kg per bag
30 kg per bag
50 kg per bag
1 ton jumbo bag
1.5 tons jumbo bag
2 tons jumbo bag
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
13034 Onescreen 1 Panel Dip Card Suppliers
Short on time? Let Onescreen 1 Panel Dip Card sellers contact you.
We deals Galvanized Steel Pipes used for Agriculture and Irrigations, Water Pipeline, Road Barriers. In addition to round pipes, we can also supply galvanized pipes in square and rectangular sections.Hot Dip Galvanized pipes in sizes from 1/2" To 6 OD and in wall thickness ranging from 1MM to 6MM. Our company is specializing in the galvanized pipes, welded pipes and other pipes. Surface hot dipped galvanized, Pre-gavanized, electro galvanized, painted, threaded, beveled, grooved, engraved Usage Scaffolding pipe, Structure pipe, Fence/Door pipe, Furniture, Lowpressure fluid pipe for water oil or gas, Boiler pipe.
Cane Webbing has many uses, as panel inserts on cabinets, overlays on furniture and of course you have seen it in ceiling fans.
Use your imagination for other ideas.
1. This classic design of the webbing is suitable for various styles.
2.With high-quality eco-friendly , it brings you a cozy feeling with good and breathable tactile.
3. With many years of rattan webbing experience, our professional technicians provide you a fine products.
Cane Webbing has many uses, as panel inserts on cabinets, overlays on furniture and of course you have seen it in ceiling fans.
Use your imagination for other ideas. 1. This classic design of the webbing is suitable for various styles. 2.With high-quality eco-friendly , it brings you a cozy feeling with good and breathable tactile. 3. With many years of rattan webbing experience, our professional technicians provide you a fine products.
Cane Webbing has many uses, as panel inserts on cabinets, overlays on furniture and of course you have seen it in ceiling fans.
Use your imagination for other ideas.
1. This classic design of the webbing is suitable for various styles.
2.With high-quality eco-friendly , it brings you a cozy feeling with good and breathable tactile.
3. With many years of rattan webbing experience, our professional technicians provide you a fine products.
Cane Webbing has many uses, as panel inserts on cabinets, overlays on furniture and of course you have seen it in ceiling fans.
Use your imagination for other ideas.
1. This classic design of the webbing is suitable for various styles.
2.With high-quality eco-friendly , it brings you a cozy feeling with good and breathable tactile.
3. With many years of rattan webbing experience, our professional technicians provide you a fine products
Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.
3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.
4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.
5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.
A solar panel, also known as a photovoltaic (PV) panel, is a device that converts sunlight into electricity through the
photovoltaic effect. Hereâ??s a detailed description of solar panels:
Structure and Components
1. Photovoltaic Cells:
* Solar panels are made up of multiple photovoltaic cells arranged in a grid-like pattern on a rigid frame.
* Each cell is typically made from silicon, the most common semiconductor material used in solar panels.
2. Encapsulation:
* Photovoltaic cells are encapsulated between a front glass cover and a backsheet or encapsulant material.
* The front cover is tempered glass designed to protect the cells from environmental factors while allowing sunlight to pass through.
Automatic single-sided saw bone meat machine with 1pcs saw blade, automatic bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Paramters:
Machine size : 1350x2170x1700mm
Workbench size: 650x800
Food height for card loading (mm): 150
Dimensional accuracy (mm): 0.1
Cut thickness (mm): 80
The highest saw blade movement (m/s): 34
Saw blade specification (mm): 3084x16x0.56
Motor power (Kw): 3.5
Voltage: 380V/50HZ
Weight: 1100KG
Pressure increase (MPa): 0.4
Air volume requirement (L/min): 10
Cut back (times/minute): 10
Main features:
1. You can choose to use a single saw or a double saw for product stability, or a single saw for unstable products
2. Ensure the hygiene of the meat and ensure a smooth cutting surface
3. Waterproof design for quick cleaning
4. According to different uses, frozen meat, lamb chops, steak, fish
5. Adopting human-machine interface and intelligent operation panel
6. 30 sets of memory functions can be set
7. Feeding adopts servo motor, with high precision
8. The conveyor belt can be removed for cleaning
Paramters :
cutting thickness 1-50mm ,material thickness under 15cm .
capacity 8-15times/min ,can adjustable.
Semi automatic saw bone meat machine With fine-tuning, bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Parameters :
Voltage: 380V
Power: 1.5KW
Operating speed: 1500m/min
Saw blade length: 2000mm
Cutting ruler: 300 * 220mm
Workbench size: 657 * 525mm
Machine size: 800 * 600 * 1520mm
Machine weight: 80kg
13034 Onescreen 1 Panel Dip Card Suppliers
Short on time? Let Onescreen 1 Panel Dip Card sellers contact you.
