OIT Oit is an antimicrobial used to control slime-forming bacteria, fungi in a wide range of liquid painting, coating, ink, and other industrial settings. 25kg, 200kg/ plastic drum, 1000kg/ibc
"Description Technical Data Sheet Use: bactericide, fungicide, biocide, leather preservative 2-n-Octyl-4-isothiazolin-3-one Molecular formula: C11H19NOS CAS No: 26530-20-1 EC No: 247-761- Physical data Appearance:liquid Melting point: 18°C Boiling point: 120°C at 0.01 mm Hg Vapour density: N/A Vapour pressure: 2.98 mm Hg at 25 °C Density (g /cm-3): 1.04 Flash point: N/A Explosion limits: N/A Autoignition temperature:N/A Water solubility: negligible"
OIT-99 2.CAS#: 26530-20-1 Specifications No. Item Description 1 Appearance Yellow transparent dense form liquid or tie crystal 2 Content of Active Substance (%) 99min 3 pH value 1.0max 4 Density (g/ml) 1.03-1.05 Application field Suitable for applications in the industrial oil, plastic, building materials, leather, paint, and textile printing and dyeing areas to protect against mildews Performance characteristics 1. Demonstrate an excellent bactericidal effect; with broad-spectrum, long-lasting features. 2. Low toxicity; easy to operate; can be added at any production step. 3. Applicable in the medium of the pH value in a range of 5 to 9. 4. Good uniformity of dispersion; contain no VOC; with thermal stability. 5. Not combustible and easy to transport and use. 6. Stable in the intense ultraviolet or acid rain environment. Usage andCautions 1. It is recommended to use the concentration of using in the range of 0.1 to 0.5%, depending on the actual applications. This product is also widely used for sterilization of interior and exterior latex paints to protect against mildews; suitable for use in the production of eco-friendly latex paints; it is recommended to adopt the adding concentration of 0.1 - 0.3% depending on the performance and service environment of paints. 2. If it splashes onto the skin, rinse with water immediately to avoid irritation or cauma. 3. This product should be used in the medium of pH 9.5max. 4. Wear protective clothes, rubber gloves, goggles and masks; avoid any contact with the skin, eyes and mucous membranes. Packaging 200 kg per drum. Storage and Transportation To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
OIT-45 2.CAS NO:26530-20-1 3. 4. Specifications No. Item Description 1 Appearance Yellowish transparent thick liquid 2 Content of Active Substance (%) 45min 3 pH value 1.0max 4 Density (g/ml) 1.02-1.05 Application field Mainly used in the synthetic leather, genuine leather, polymer, and paints industries to protect against mildews. Performance characteristics 1. Serve as a broad-spectrum, long-lasting biocide to kill bacteria and fungi of all kinds. 2. Can be uniformly dispersed in the slurries of acrylic resin and polyurethane resin. 3. Excellent resistance to high temperature. 4. Applicable in the medium of the pH value in the range of 3 to 9. 5. Low toxicity; completely in line with the strictest EU standards. Cautions For use in the synthetic leather, genuine leather, and polymer industries, the concentration of using is recommended to be 0.3-1.0% (w/w); instructions for the concentration of using in the paint industry will be offered by the company s technology division depending actual applications. Packaging 1,000 kg per IBC drum, 200 kg per drum. Storage and Transportation To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
OIT 45% Metalworking Fluid Fungicide for Water-Based Cutting Fluids Chemical Name: 2-n-octyl-4-isothiazolin-3-one (OIT) CAS No: 26530-20-1 OIT-45 Biocide is a broad-spectrum fungicide that has been recommended and widely used for tankside control of fungi in metalworking central systems. OIT-45 is also an effective fungicide for use in many metalworking fluid concentrates with the appropriate stabilizer package. Due to the wide variations in metalworking fluid formulations, laboratory or small-scale tests are recommended to evaluate OIT-45 in use- dilution and concentrate metalworking fluids before they are commercialized. OIT-45 is a highly effective, industrial fungicide that exhibits excellent fungistatic and fungicidal activity against fungi, including yeasts and mold, and Gram-Positive bacteria, and limited activity against Gram-Negative bacteria. Commonly known as octhilinone, 2-n-octyl-4-isothiazolin-3-one is the active ingredient of OIT-45 It is supplied as a 45 percent active liquid in propylene glycol. The performance of OIT-45 is similar to KATHON â?¢ 893 MW /SKANE â?¢ M-8 ,ACTICIDE ® 45,ACTICIDE ® OTW 45 ,Isocilâ?¢ WT,BIOCIDE 18/45 SKYBIO 429. General Soluble, synthetic, and semi-synthetic metalworking fluids or coolants provide an excellent environment for the growth of various microorganisms, including bacteria, mold, and yeast. If allowed to grow, these organisms can have detrimental effects on the fluids. For example, bacteria, which can grow very quickly, can destroy the integrity of the fluid by discoloration, destroying lubricity characteristics, and causing emulsions to split. Bacteria can also reduce the pH of the fluid, which can promote corrosion. Some forms of bacteria have objectionable odors. Fungi typically grow more slowly than bacteria, but can form large masses which clog filters and lines and in some cases lead to system shutdown; fungi also generate foul odors and can cause corrosion. The increased use of synthetic fluids over the past few years has led to an even greater need for the enhanced fungal control that OIT-45 Biocide can provide. Technical Index: Appearance: Pale brown liquid Content of active substance%: â?¥45% Ph value: 3.0-7.0 Density(25) g/cm3: 1.00-1.05 Application: Widely used in Paintã??inksã??lubricantã??shoes creamã??leather chemicalã??wood product and cultural relic protection etc. Safety/Operation/Toxicityï¼? Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once touch, will be sensitive to skin.Irritating to the skin and eyes. Packaging: 25Kgs/200 Kgs drum
OIT-98 (2-N-octyl-4-isothiazolin-3-one) Chemical Name: 2-n-octyl-4-isothiazolin-3-one; 2-Octyl-2H-isothiazol-3-one; Octylisothiazolinone; Kathon 893 CAS NO.: 26530-20-1 Molecular formula: C11H19NOS Molecular weight: 213.34 Specification: Appearance: Pale brown liquid Content of active substance%: 98% PH value: 4.0-7.0 Density(25) g/cm3: 1.00-1.05 Applications It is mainly used as biocides and preservatives for coatings, paints, resins emulsions, oil water emulsions and photo-chemicals etc. Features: 1. Broad-spectrum sterilization,with good inhibiting capacity towards bacteria,mould,Fungus and ferment. 2. Lox toxicity,long lasting effect: Free of formaldehydeï¼?No smell. 3.Strong Bactericidal power:with strong capability of killing moulds, effect is obvious than the traditional Fungicide,is a kind of proper replacement of traditional film Fungicide. 4. No impact to environment. The products can be degrade naturally to Non-toxic substance,will not cause pollution to environment. Application: Widely used in Paintã??inksã??lubricantã??shoes creamã??leather chemicalã??wood product and cultural relic protection etc. Safety/Operation/Toxicity Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once touch, will be sensitive to skin.Irritating to the skin and eyes. Remarks: When the final products content is lower than 1.79%, dont need special tagging,once above 1.79% ,please consult with factory technique lab. Packaging: 25Kgs,200 Kgs drum Storage With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place.
.Event management
Black tea, sugar, maize, avocado and oil..trading
Sludge Oil ,Palm Acid Oit.
Mit cmit, mit, oit, homotaurine, tolcapone.
MIT Methylisothiazolinone is an antimicrobial used to control slime-forming bacteria, fungi, and algae in cooling water systems, fuel storage tanks, pulp and paper mill water systems, oil extraction systems, and other industrial settings. It is frequently used in personal care products such as shampoos and other hair care products, as well as certain paint formulations. 25kg, 200kg/ plastic drum, 1000kg/ibc
2 ethylanthraquinone, anhydrous aluminum chloride, poly aluminium chloride, cmit/mit, dcoit, oit, mit, magnesium sulfate heptahydrate and sodium hypochlorite.
Plastic testing equipment, polymer testing equipment, paper testing equipment, rubber testing equipment, HDPE pipe testing equipment, dumbbell press, two roll mill, OIT apparatus.Manufacturer
Sesame seed, sesame oit, grass broom, coconut coir fiber, coconut leaf stick, garments wastes cut pieces, leather wastes, coco dust, rubber wastes (tyres, tubes), fish scale, dried shrimps shell, frozen shrimps, potato, mustard oil cake, garments accessories, label.
DBNPA 2,2-Dibromo-2-cyanoacetamide Molecular formula C3H2Br2N2O Molecular weight 242 CAS NO. 10222-01-2 Items Technical Index Appearance White Crystal Powder. Content 99.0% Melting Point 122.0-127.0 pH(1% aqueous solution) 5.0-7.0 Volatile 0.5% 35% DEG solubility No insoluble substance Shelf life 2 years  DBNPA 20% solution: Items Technical Index Appearance Transparent or Light yellow liquid Content 20% Density(20) 1.18-1.24 PH 4.0-7.0 Shelf life 6 Months Usage biocides in broad spectrum. It is widely used in industrial circulating water system, large air-condition and the large center of sewage treatment to eliminate microorganism and alga and shuck off clay. It is also used in the process of paper making to prevent reducing quality of paper by generation of microorganism . It is suitable for metal cutting of cooling liquor, recovery system of oil, latex and ply-woods as anti-spy biocides. It has following advantages :Easy to handle .No unusual oxidation hazards .Similar performance and safety in paper and oilfield applications . Package 25kg bag,250kg Bag,500kg Bag
PAC Poly Aluminium Chloride CAS No. 1327-41-9 Product Description Poly Aluminium Chloride is an inorganic high-molecular polymer with gelling property. It could be used as cementing material in fireproofing material, Ultrapure alumina products, refractory concrete etc. Usage Poly Aluminium Chloride is an flocculant mainly used in the purifying of drinking water. It is also used in the special water treatment, such as removal of iron, cadmium, fluorine, radioactive pollutant, oil slick etc. It could also be used in industrial waste water treatment, such as the waste water treatment of dying industry. It is also widely used
Usage This product belongs to bromine compounds, is an efficient antiseptic fungicide, widely used in industrial circulating water, industrial cooling water, electricity, oil industry, algae sterilization agent. Package 30kg Drum, 250kg Drum, IBC Drum
Usage Carbohydrazide has strong reducibility. It can be used as energetic material intermediate, components of fire explosive and propellant directly; also as refinery equipment of preservatives and boiler water treatment of deoxidizer. In Chemical fiber industry, it s good elastic fiber crosslinking agent .As chemical raw materials and chemical intermediates,it s widely used in medicine, herbicide and plant growth regulator, dye, etc. Package 25kg drum, 25kg bag,25kg Carton
Usage Bactericide, it is widely used in industrial circulating water, algae-killing, paper pulp, paint, plastic, timber-cooling circulating water and other industries. Package 25kg Drum,,500kg Bag,25kg Carton
Usage biocides in broad spectrum. It is widely used in industrial circulating water system, large air-condition and the large center of sewage treatment to eliminate microorganism and alga and shuck off clay. It is also used in the process of paper making to prevent reducing quality of paper by generation of microorganism . It is suitable for metal cutting of cooling liquor, recovery system of oil, latex and ply-woods as anti-spy biocides. It has following advantages :Easy to handle .No unusual oxidation hazards .Similar performance and safety in paper and oilfield applications . Package 25kg bag,250kg Bag,500kg Bag
