It is applied to the oil well containing corrosive medium such as salt sulfur, carbon dioxide and bacteria and the wells with fewer sands.Comparing with conventional tubing pump,The API Tubing Pump has better performance in corrosion resistance & antifriction aspects.Plunger of it is nickel plated on alloy base,inside wall of barrel is plated hard cadmium,key parts,such as valve hood,valve ball,are made of materials with excellent mechanical performance and corrosion resistant property.Compared with conventional pump,the series of pump has a longer working life. Subsurface pump Per API Spec.11AX
The biggest feature of deep well pump is to make the motor and pump into one, it is immersed in the groundwater well for pumping and conveying water, a kind of pump, which is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. As the motor is submerged in water at the same time, the structure requirements for the motor are more special than the general motor. The structure of the motor is divided into four types: dry type, semi-dry type, oil-filled type and wet type.
Before starting the pump, the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the vane, and under the action of centrifugal force, it flies away from the impeller and shoots outward, and the liquid shot out in the diffusion chamber of the pump casing slows down gradually, and the pressure increases gradually, and then it flows out from the outlet of the pump and the discharge pipe. At this time, in the centre of the vane as a result of the liquid is thrown to the surrounding and the formation of neither air nor liquid vacuum low-pressure area, the liquid in the pool of liquid pool under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is so continuously from the pool of liquid is pumped up and continuously from the discharge pipe out.
We are one of the concrete pump manufacturers in Korea
Brand: SAMIL GIANT in Korea
Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m
Stationary pump, Line pump
We are able to send full details if you make an inquiry
44626 Oil Well Sucker Rod Pump Tubing Pump Suppliers
Short on time? Let Oil Well Sucker Rod Pump Tubing Pump sellers contact you.
Submerged pump [1] is a positive pressure conveying vertical pump, which can effectively solve the problem of air resistance and cavitation. The explosion-proof level of the conveyed material determines the submerged pump products with different structure, working principle, classification, scope of application, product advantages and disadvantages and mode of operation, which can be simply divided into two categories of traditional submerged pumps (explosion-proof outside the tank 1 area, 0 area inside the tank is not explosion-proof) and new type of submerged pumps (explosion-proof outside the tank 1 area, explosion-proof inside the tank 0 area).
Submerged pumps are vertical pumps in which the impeller, pump body, and other flow-through parts are submerged in the material being conveyed, and are connected to the motor by a shaft. Submerged pumps are made according to the different needs of reaching into the length of the container. Submerged pump and material contact parts, generally according to the requirements of the material selection, metal and non-metallic materials. Such as 304, 316, 316L, engineering plastics, fluorine plastic and so on.
Diaphragm pumps are designed to protect columns and cylinders by separating the liquid being pumped from the columns and cylinders with the aid of a membrane. The left side of the diaphragm in contact with the liquid are made of corrosion-resistant materials or coated with a layer of corrosion-resistant substances; the right side of the diaphragm is filled with water or oil.
Diaphragm pumps, also known as control pumps, is the main type of actuator, by accepting the control signal output from the regulator control unit, with the help of power operation to change the fluid flow. Diaphragm pump in the control process is to accept the regulator or computer control signals, change the flow of the regulated medium, so that the regulated parameters are maintained in the required range, so as to achieve the automation of the production process. If the automatic adjustment system compared with the artificial adjustment process, the detection unit is the human eye, regulation and control unit is the human brain, then the implementation of the unit - diaphragm pump is the human hand and foot. To achieve the process of a parameter such as temperature, pressure, flow, level and other regulatory control, are inseparable from the diaphragm pump.
Air operated diaphragm pumps are commonly used in five materials: plastic, aluminium alloy, cast iron, stainless steel, Teflon. Electric diaphragm pumps have four materials: plastic, aluminium alloy, cast iron, stainless steel. Diaphragm pump diaphragm according to different liquid media were used nitrile rubber, neoprene, fluorine rubber, PTFE, PTFE, etc. placed in a variety of special occasions, used to pump a variety of media to meet the needs. [2].
Slurry pump refers to speak refers to through the use of centrifugal force (pump impeller rotation) role of solid, liquid mixed media energy increase of a mechanical, electrical energy into the medium of kinetic energy and potential energy of the equipment. Mainly used in: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industry sectors.
Slurry pump conveys a mixture of solid particles containing dross and water. But from the principle of slurry pump belongs to a centrifugal pump, in the iron and steel enterprises are mainly used for converter dust water, blast furnace gas scrubbing water, continuous casting turbid ring water and rolling steel turbid ring water and other systems of slurry transport.
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
44626 Oil Well Sucker Rod Pump Tubing Pump Suppliers
Short on time? Let Oil Well Sucker Rod Pump Tubing Pump sellers contact you.