Nickel-Based Precision Alloy Casting Category:Nickel alloy casting Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc. Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used. Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc.
Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. The Incoloy825 has the following functions: Good resistance to stress corrosion cracking. Good resistance to pitting and crevice corrosion Good oxidation resistance and non oxidative thermal acidity. It has good mechanical properties at room temperature and high temperature up to 550 Certification of pressure vessels with manufacturing temperatures up to 450 C Incoloy 825 metallographic structure: Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization. Incoloy825 Corrosion resistance: Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments. Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550. Typical applications include: Heating pipes, containers, baskets and chains for sulfuric acid pickling plants. Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline. Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production. Air heat exchanger in petroleum refining Food Engineering chemical process Flame retardant alloy for high-pressure oxygen Product name INCOLOY Alloy 825 Grade INCOLOY Alloy 825 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade Cu Ti AI P C Ni Cr Mo INCOLOY Alloy 825 2 0.8 0.1 - 0.02 42 21 3
Nickel based corrosion resistant alloy casting Category:Nickel alloy casting Nickel based corrosion resistant alloy casting, the deoxidation process is strictly controlled during production. Common grades are N08830 etc.Product Description Nickel based corrosion resistant alloy casting, the material cost is higher, but the corrosion resistance is very good.It has applications in aerospace, petrochemical, machinery, marine, environmental protection, energy, food and other fields. Nickel-based corrosion-resistant alloy is based on nickel, plus some other elements, so that it can resist corrosion to a certain extent, generally has austenite structure, common nickel-based corrosion-resistant alloys are nickel-copper alloy, nickel-chromium alloy and many more. Commonly there are NS113, NS131, NS141 and other grades. Nickel-based corrosion-resistant alloys usually need to withstand the corrosion of atmosphere, water vapor, water and other substances, and most of them have austenite structure. According to different elements added, they have targeted resistance to different substances, such as high temperature chlorine resistance. The total of nickel-copper, hydroxide-resistant nickel-chromium alloy, etc.
Nickel-based heat-resistant alloys Category:Nickel alloy casting Nickel-based heat-resistant alloys is a kind of nickel-based alloy, and the common grades are GH738, GH4738 etc. Product Description Nickel-based heat-resistant alloys is a nickel-based alloy. There are many different classifications of nickel-based alloy. Heat-resistant alloy is a material that can be used at high temperatures.For example, chemical and chemical equipment in the petrochemical field, atomic power generation in the energy field, comprehensive utilization of coal and other fields. The main elements of nickel-based heat-resistant alloys are nickel and chromium, and some other elements are also added to improve the solid solution strengthening of the alloy. They can still have high strength and oxidation resistance at high temperatures, and are often used in similar aircraft engines. and other high-temperature parts on the equipment. Nickel-based alloys can dissolve more elements in them, and can still maintain good organizational stability after dissolving the elements. The representative Incoloy alloy series is resistant to corrosion and creep resistance. It can also be used in Stress cracking is prevented to a certain extent.
Nickel-based shape memory alloy casting Category:Nickel alloy casting Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc. Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors. Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role. Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on.
Medium-strength structural alloy casting Category:Nickel alloy casting Nickel-based heat-resistant alloys is a kind of nickel-based alloy, and the common grades are GH738, GH4738 etc. Product Description Nickel-based heat-resistant alloys is a nickel-based alloy. There are many different classifications of nickel-based alloy. Heat-resistant alloy is a material that can be used at high temperatures.For example, chemical and chemical equipment in the petrochemical field, atomic power generation in the energy field, comprehensive utilization of coal and other fields. The main elements of nickel-based heat-resistant alloys are nickel and chromium, and some other elements are also added to improve the solid solution strengthening of the alloy. They can still have high strength and oxidation resistance at high temperatures, and are often used in similar aircraft engines. and other high-temperature parts on the equipment. Nickel-based alloys can dissolve more elements in them, and can still maintain good organizational stability after dissolving the elements. The representative Incoloy alloy series is resistant to corrosion and creep resistance. It can also be used in Stress cracking is prevented to a certain extent.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Nickel-based wear-resistant alloy casting Category:Nickel alloy casting Nickel-based wear-resistant alloy casting, its product use environment is more complicated than general wear-resistant cast iron. Common grades are N06002 etc. Product Description Nickel-based wear-resistant alloy casting is to cast nickel-based wear-resistant alloys into products such as valves and pump parts that can be used.It can be used in equipment such as valves, pumps, seals, brakes, etc. in jet aircraft and internal combustion engines. Nickel-based wear-resistant alloy refers to the alloy product, which can not only withstand abrasive wear, adhesive wear and other wear, but also withstand medium corrosion and high temperature oxidation. Therefore, its working environment is more complicated than that of general wear-resistant steel and other materials. Common grades are N06002. Nickel-based wear-resistant alloys also have wear-resistant properties and can also withstand high temperature conditions and corrosion to a certain extent. They are usually used for wear-resistant parts that work in air or low-lubricating liquids, such as atomic energy equipment, petrochemical equipment, and jet aircraft manufacturing. and other industries.
NICKEl - IRON ALLOY KOVAR Composition (Nominal): NI 29; Co17; Fe Balance;) ;(A low expansion alloy which has been widely used for making hermetic seals with the harder Pyrex glass and ceramic materials such as in power tubes, microwave tubes, transistors, and diodes, as well as integrated circuits. :) (Specifications: Kovar alloy is manufactured to meet the requirements of ASTM Specification F-15.
Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite. On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens. Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials, Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.
NICKEL IRON SEALING ALLOY 52 ; (Composition (Nominal): Ni 50 , Fe Balance . ;( Alloy 52 is a 50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy's rate of thermal expansion is virtually constant to a temperature of about 1050 °F (565 °C). ;(Specification : ASTM F30 ; ;(Product availability and request a QUOTE!
Manufacturers, exporters & importers of stainless steel / copper / brass / aluminium / duplex steel / carbon steel / alloy steel in shape of pipes, tubes, flanges, pipe fittings,round bar, bright bars, angle bar, flat bar, hex bar, square bar, sheets, coils, strip, plates, wire, tie wire, strip banding, decorative tubes / pipe, valves, threaded fittings,forged fittings etc. in any shape / size / grade. also specialised in high nickel alloys like inconel, monel, titanium, hastalloy etc. in any size / type / grade & as per drawing..
IRON NICKEL ALLOY ASTM F1684 Nilo 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
IRON NICKEL ALLOY SUPER-INVAR 32-5 ; (Composition (Nominal): 0.02 C, 0.40 Mn, 0.25 Si, 32 Ni, 5.5 Co, Bal. Fe ; : (Super Invar 32-5 is A low expansion alloy consisting of 32% Nickel, 4% Cobalt, and balance Iron. Super Invar 32-5 Alloy exhibits minimum thermal expansion at room temperatures (one half of Invar 36), as well as thermal expansion properties less than that of Invar Alloy in the 67/203°F (-55/95°C) temperature range. ; (Specifications: ASTM F1684 ;: (Product availability and request a QUOTE!
IRON NICKEL ALLOY ASTM F1684 PERNIFER 36 ; (Composition (Nominal): 0.02 C, 0.35 Mn, 0.20 Si, 36.00 Ni, Bal. Fe ; ( Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, making Invar Alloy particularly useful in applications where minimum thermal expansion and high dimensional stability is required, such as in precision instruments like optoelectronic devices, optical and laser benches, electronics, and other kinds of scientific instruments.; ( SPECIFICATION: astm f 1684 ; (Product availability and request a QUOTE!
Aluminum Parts
Lithium ion battery powder good quality Nickel 15% above, Cobalt 5% above, Lithium 3% above and Copper 7% above regular base .
Sweet marjoram: Origanum (O) hortensis (orMajoranahortensis). Potmarjoram: O.onites Wildmajoram: O.vulgare. Syrian majoram is called zatar Family: Labiatae or Lamiaceae (mint family). In Europe, marjoram was a traditional symbol of youth and romantic love. Used by Romans as an aphrodisiac, it was used to cast love spells and was worn at weddings as a sign of happiness during the middle Ages. Greeks who wore marjoram wreaths at weddings called it “joy of the mountains.” It was used to brew beer before hops was discovered, and flavored a wine called hippocras. A cousin of the oregano family, marjoram originated in Mediterranean regions and is now a commonly used spice in many parts of Europe. Called zatar in the Middle east and often mistaken for oregano, it is also a popular spicing in Eastern Europe. Origin and Varieties Marjoram is indigenous to northern Africa and southwest Asia. It is cultivated around the Mediterranean, in England, Central and Eastern Europe, South America, the United States, and India. Description Marjoram leaf is used fresh, as whole or chopped, and dried whole or broken, and ground. The flowering tops and seeds, which are not as strong as the leaves, are also used as flavorings. Sweet marjoram is a small and oval-shaped leaf. It is light green with a greyish tint. Marjoram is fresh, spicy, bitter, and slightly pungent with camphor like notes. It has the fragrant herbaceous and delicate, sweet aroma of thyme and sweet basil. Pot marjoram is bitter and less sweet. Chemical Components Sweet marjoram has 0.3% to 1% essential oil, mostly monoterpenes. It is yellowish to dark greenish brown in color. It mainly consists of cis-sabinene hydrate (8% to 40%), -terpinene (10%), a-terpinene (7.6%), linalyl acetate (2.2%), terpinen 4-ol (18% to 48%), myrcene (1.0%), linalool (9% to 39%), -cymene (3.2%), caryophyllene (2.6%), and a-terpineol (7.6%). Its flavor varies widely depending on its origins. The Indian and Turkish sweet marjorams have more d-linalool, caryophyllene, carvacrol, and eugenol. Its oleoresin is dark green, and 2.5 lb. are equivalent to 100 lb. of freshly ground marjoram. Marjoram contains calcium, iron, magnesium, phosphorus, potassium, sodium, vitamin A, vitamin C, and niacin. Culinary uses of Marjoram Marjoram is typically used in European cooking and is added to fish sauces, clam chowder, butter-based sauces, salads, tomato-based sauces, vinegar, mushroom sauces, and eggplant. In Germany, marjoram is called the “sausage herb” and is used with thyme and other spices in different types of sausages. It is usually added at the end of cooking to retain its delicate flavor or as a garnish. It goes well with vegetables including cabbages, potatoes, and beans. The seeds are used to flavor confectionary and meat products.
Product Description Name: Inconel X750 Nickel Alloy Coil / belt / strip in Best Price Products description: UNS N07750 Chemical composition Physical properties Features: Inconel X750 is an age-hardenable nickel-chromium alloy. It has good corrosion and oxidation resistance and high strength at…
