Find Verified Ni Mh Batterysc3800 Suppliers, Manufacturers and Wholesalers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.

Material: PMMA lump regrind transparent yellowish Category : PMMA Type : lump regrind Color : transparent yellowish Quantity : 24 Tons Loading weight: 24 Tons Specification: PMMA lump regrind from Sumitomo ME and MH injection/extrusion grade, post industrial, transparent with burned yellowish parts Subject to unsold

Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function.   Applicationï¼? Architecture:Ã?  curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator   Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:Ã? 3300*8000mm Normal size:Ã? 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996

(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM

(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 3040Cr18Ni9A182F304SUSF30414301 Hardness 14H12H34HHO Chemical Composition Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS304 008 100 200 0045 0030 80100 1820 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS304 ANN 200 205 520 40 14H 200250 225 550 35 12H 250310 470 780 6 34H 310370 665 930 3 H 370430 880 1130 Surfce Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 301 sus301 X12CrNi1707Cr17Ni71431 Hardness 14H12H34HHO Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS301 015 100 200 0045 0030 6080 1618 025 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS301 ANN 250 205 520 40 14H 250310 470 780 35 12H 310370 510 930 10 34H 370430 745 1130 5 H 430490 1030 1320 3 EN 490550 1275 1570 Surface Finish Surface Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe

430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75

Sorbitol liquid 70%, CAS no.50-70-4, also known as glucitol, manufacturing process from purified glucose as material via hydrogenation refining and concentration. It appears as a colorless liquid, used as a food sweetener. Uses: food-grade liquid sorbitol can also be used as a sweetener in home brewing, cheeses, processed fruit, dried vegetables, fat spreads, and baked goods. Sorbitol liquid is also used in modern cosmetics as a humectant and thickener. Sorbitol is also used in some toothpastes and mouthwashes. As an experienced Sorbitol liquid manufacturer and supplier, we has been supplying and exporting Sorbitol liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Sweeteners Qty in 20 FCL 25000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E420 CAS No. 50-70-4 HS Code 382460 Specification FCC/USP Sorbitol liquid 70% Technical grade Specification Item Specification Our control Appearance Transparent, sweety,viscidity qualified Dry solds,% 69.0-71.0 70.0 Sorbitol content(based on dry basis),% 70.0 70.0 Ph value 5.0-7.5 5.0-7.5 Specific Gravity (Relative density(d2020)) 1.285-1.315 1.285-1.315 Reducing Sugars(based on dry basis),% 0.21 0.15 Total Sugars(based on dry basis),% 8.0 8.0 Residue on ignition,% 0.10 0.10 Refraction Rate 1.4575-1.4620 1.4605 Conductivity Rate 10 s/cm 10 s/cm Heavy metal 5PPM 5PPM Lead(base on pb) 1PPM 0.5PPM As (base on As) 2PPM 1PPM Chlorid(base on Cl) 10PPM 10PPM Sulphate(base on SO4) 50PPM 20PPM Nickel(base on Ni) 2PPM 1PPM Total Aerobic Plate Count 1000cfu/ml ﹤100cfu/ml Yeast &Mold 100cfu/ml 100cfu/ml E-Coli Absent(cfu/g) confirms Salmonella Absent(cfu/25g) confirms assess qualified with the standard (It is a non-crystalline liquid)REMARKS: This product complies with the Standard (according to with the FAO/WHO standard 1988). Fit for human consumption.

Standard Technique Surface finish Grade Thickness Width*Length JIS Aisi ASTM DIN EN bs Hot rolled No.1 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 4.0mm-16mm,17-150mm 1250*3000mm(4.1*10ft) 1500*3000mm(5*10ft) 1250*6000mm(4.1*19.6ft) 1500*6000mm(5*19.6ft) 1800*6000mm(5.9*19.6ft) 2000*6000mm(6.5*19.6ft) Cold rolled 2B 201, 202, 301, 304, 304J1, 304L, 321, 316, 316L, 309S, 310S, 317L, 409L, 410, 410S, 420J1, 420J2, 430, 444, 441, 436, 439, 904L, 2520, 2205, 2507 etc 0.2mm-3.0mm 1000*2000mm(3.2*6.5ft) 1219*2438mm(4*8ft) 1500*3000mm(5*10ft) 1800 available 2000 available No.4 Hairline 8K BA Hot rolled or cold rolled embossed similar to the above info. colored Customized We can customize surface treatment, grade, thickness, width, length etc according to customer\'s requirements. Send us inquiry to get cost-effective price and details within 1 hour. Chemical Composition Mechanical Character Grade C Si Mn P S Ni Cr Mo Cu N Hardness 201 0.15 1 5.50-7.50 0.045 0.03 3.50-5.50 16.00-18. 00 ? 0.05-0.25 HB 241, HRB 100, HV240 304 0.08 1 2 0.045 0.03 8.00-11.00 18.00-20. 00 HB 187, HRB 90, HV 200 310s 0.08 1.5 2 0.045 0.03 19.00-22. 00 24.00-26. 00 HB 187, HRB 90, HV 200 316L 0.03 1 2 0.045 0.03 10.00-14. 00 16.00-18. 00 2.00-3.00 HB 187, HRB 90, HV 200 321 0.08 1 2 0.045 0.03 9.00-12.00 17.00-19. 00 HB 187, HRB 90, HV 200 430 0.12 1 1 0.04 0.03 (b) 16.00-18. 00 HB 183, HRB 88, HV 200

The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Product Specification and Steel Grade ASTM JIS AISI EN Mill\'s Standard S30100 SUS301 301 1.4310 S30400 SUS304 304 1.4301 S30403 - 304L 1.4307 S31008 SUS310S 310S 1.4845 S31603 - 316L 1.4404 201 S32100 SUS321 321 1.4541 202 S41008 SUS410S 410S - 204Cu3 S43000 SUS430 430 1.4016 S43932 - - 1.4510 S44400 SUS444 444 1.4521 S44500 SUS430J1L - - Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL Tolerance of Width W < 100 mm 100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm �?�??�?�?�?�± 0.10 mm �?�??�?�?�?�± 0.25 mm Chemical Composition & Mechanical Property : Steel Grade Ni% Max. Cr% Max. C% Max. Si% Max. SUS301 6.0~8.0 16.0~18.0 0.15 1 SUS304 8.0~10.5 18.0~20.0 0.08 1 SUS304L 9.0~13.0 18.0~20.0 0.03 1 SUS310S 19.0~22.0 24.0~26.0 0.08 1.5 SUS316L 12.0~15.0 16.0~18.0 0.03 1 SUS321 9.0~13.0 17.0~19.0 0.08 1 SUH409L 0.6 10.5~11.75 0.03 1 SUS410S 0.6 11.5~13.5 0.08 1 US420J2 0.6 12.0~14.0 0.08 1 SUS430 0.6 16.0~18.0 0.12 0.75 Mechanical Property (For Reference) Steel Grade N/mm 2 MIN. Tensile Stress N/mm 2 MIN. Proof Stress % MIN. Elongation HRB MAX. Hardness SUS301 520 205 40 95 SUS304 520 205 40 90 SUS304L 480 175 40 90 SUS310S 520 205 40 90 SUS316L 480 175 40 90 SUS321 520 205 40 90 SUH409L 360 175 25 80 SUS410S 410 205 20 88 SUS420J2 540 225 18 99 SUS430 420 205 22 88