Nano Aluminum Composite Panel Construction and Decoration Material Aluminum Composite Panel Aluminum Composite panel(ACP) 1. Standard: according to GB/T 17748-1999 standard 2. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin (PVDF) and polyester resin (PE) roasting painting b) Core: nontoxic polyethylene. c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting . coating e) Surface coating thickness: 30um f ) Aluminum alloy sheet thickness: 0.1mm, 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.45mm, 0.5mm 3. Dimensions: a) Thickness: 3mm, 4mm b) Width: 1220mm 1500mm.. c) Length: 2440mm, 3200mm, 4000mm,5000mm (max: 6 meter) d) Weight: 5.5kg/sqm based on 4mm thickness. e) Standard size: 1220 x 2440mm f) Nonstandard sizes are available according to requirement of customers 4. Application scope: 1) Building exterior curtain walls.. 2) Decoration and renovation additions for old buildings 3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies 4) Shop door decorations 5) Advertisement board display platforms and signboards 6) Wallboards and ceilings for tunnels.. 7) Industrial materials, materials for vehicles and boats More information you can view here.
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
Aluminium composite panel Nano-photocatalysis coating can decompose the pelagic microbe & flowing organic materials , so that can be to kill and restrain the microbe, clean the air and protect the virus infecting , also the nano-photocatalysis coating can be self-cleaning. So now the nao-photocatalysis coating become welcome and popular in the construction materials field. Features: 1)excellent easy-cleaning 2)pollution resistance 3)oil resistance 4)good friction resistance 5)strong acid & alkali resistance 6)outstanding weather resistance 7)good self-cleaning characteristic Material: A) front: aluminium alloy sheet coated fluoro-carbon resin (pvdf) with nano lacquer B) core: nontox low density polyethylene C) back: aluminium alloy sheet coated with polyester resin painting D) surface coating thickness: 32µ±1µ E) aluminium alloy: 3003 h24 F) sheet thickness: 0.3mm, 0.4mm, 0.5mm Standard: A) west europe standard ( germany din standard); B) the east europe standard ( russian standard ); C) the commonweathlth standard (u.K bs standard ); D) the north america astm standard; Application: A) may be widely used in galleries, exhibition, saloons, stores, offices, banks, hotels, restaurants and apartments B) an ideal decorative materials for buildings C) an ideal outer and inner walls D) kitchen cabinets , billboards, signboards, tunnels, subway, interiors E) ceilings, eaves, galleries, balconies, partitions, interior decorations F) vehicle bodies, yachts, industrial usage etc.
ACM thickness:2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness:12mm, 0.15mm, 0.18mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. Panel size:1220mm*2440mm (regular),1250mm*2440mm,1500mm* 5000mm. Package:suitable for the container Payment:30% prepayment by T/T before production, 70% balance by T/T before shipment, or 100% irrevocable L/C at sight. Delivery time:10-15 days from the date that we get your prepayment.
Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me
Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements
Aluminum composite panel We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.
Sustainable Development Of Aluminum Composite Panel Industry In order to the healthy and sustainable development of the Aluminum Composite Panel industry, we must take the comprehensive, coordinated and sustainable scientific development concept as the guidance and do a solid job in the following aspects. 1. Efforts must be made to improve product quality: product quality is the life of an enterprise and the foundation of industry development. We must change our tendency to emphasize quantity over quality and concentrate on product quality. 2. Aluminum production and integrating market demand: the main purpose of the aluminum-plastic plate is used as a building curtain wall and wall decoration, so the development of aluminum-plastic plate for construction, the demand of the architectural decoration industry as the leading direction, will closely combine with construction, building decoration industry, to the road of common development and common prosperity. 3. Give full play to the role of the association: the association should establish the scientific development concept, enhance the service function, promote the sustainable, rapid, coordinated and healthy development concept of the aluminum plastic plate from Aluminum Composite Panel Manufacturer, give full play to the association's function of bridge, coordination, service and self-discipline, and create a good environment for the development of the aluminum plastic plate industry. 4. Actively carry out technological innovation activities to promote the technical progress of the aluminum and plastic board industry: technology is the basis for the development of the aluminum and plastic board industry. Only continuous innovation and progress in technology can make the aluminum and plastic board industry last for a long time. Aluminous model board regards a kind of new-style adornment as decorating material, regard a kind of organic inorganic compound as material, although have a lot of outstanding performance, but still need to develop ceaselessly and progress, because the market and demand are not invariable, the technology is in ceaseless progress.
Techniques and methods for edge folding and grooving of Aluminum Composite Panel Aluminum Composite Panel is widely used, most of the time have to fold, today as the old xingda aluminum workers xiaobian to explain how to better under the aluminum plate folding. First of all, we all know that the premise of aluminum-plastic plate folding aluminum foil is thick enough, the thicker the aluminum skin, the better the frilled edge, before the aluminum-plastic plate folding, first we must from the back of aluminum-plastic plate with slot machine, trimming machine), open a groove, otherwise can't frilled edge, the depth of the slot is according to the thickness of the aluminous model to adjust, the tool bit shorter, first try, slowly until seemed dew aluminum skin not dew, deep cause ruffled fracture easily scratch the aluminum skin, light the bad side of easy to crack.
- High durability with aluminum surface coated with NANO technology - anti-dust and minimize water retention, as well as any impact of the environment. - Thickness range from 2mm to 7mm - Safe with fireproof material inside - Flexible, high bending, and also ensure the hardness to meet the specific requirements of each project - Rich in color, diversified in types of patterns with many types of wood, stone texture helps to replace natural materials. - Easy to install and install under all conditions
Partition panel (acp) Sheet thickness • 4.5mm • 4mm • 3.5mm • 3mm
At seven panel we use superior pvdf paint of international pvdf Aluminum composite panel. The paint goes through duplex or triplex Coating or high temperature baking to form 25-35 um thick cured film On the surface of the aluminum panel featuring maintenance free design, Great corrosion and weather resistance, and excellent self cleaning and Adhesive properties, the pvdf aluminum composite panel ensures the Building facade maintains brightness and beauty for 10-15 years. 1. Thickness: 2mm, 3m
1. Corrosivity Resistance The high fluorine content of surface fluorine-carbon spraying KYNAR500 resin can effectively resist the erosion of acid rain, air pollution and ultraviolet ray erosion. 2. Self Cleaning Because the special molecular structure of KYNAR500 in Fluorine-carbon coating rests no dust on the surface at all, it tends to be clean. 3. High Strength The high-quality, antirust Aluminium adopted is of high strength. The welding process on the openings greatly improves the stiffness of Aluminium panel and guarantees the resistance of curtain wall against wind. vibration, rainwater leaking, air invasion, thunder, shok and etc. 4. Product Characteristics The Aluminium panels produced by our company use 1100H24, 3003H24, 5005H24 single-layer Aluminium alloy board as baseplates, and the thickness varies from 1.0mm to 5.0mm. 5. The metal panel consists of veneer, reinforcing rib and hanger. Thermal insulation mineral wool could be added on the back of the panel if required, and the hanger could be bent from veneer or be mounted on the veneer additionally. 6. Advantages of Aluminium Curtain Wallboard Light, good rigidity and good strength. Good abrasion resistance and good corrosivity resistance. Easy to process and free to process plane arch, spherical face and other complex geometry. Rich colors, good decorating effects. Difficult to be stained and easy to clean and maintain. Convenient and swift Installation and Construction. Retractable, environment friendly. Strong export woodern boxes.
Products: Alubond/ Aluminum composite panel, Alubond, Aluminum Composite Materials, ACP Panel /ACM Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5,Nonstandard sizes are available according to customer's requirements. Woooden pallet.
Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5, Nonstandard sizes are available according to customer's requirements. Wooden pallet.
Aluminum composite panel. Export standard wooden packing.
Alucobest aluminum composite panel is a new decorative material used ever increasingly by developers, designers and architects world wide for various applications. The advantages of using this material over conventional material like stone, tiles and paint are far too many. Alucobest aluminum composite panel also known to many as sandwich panel consists of a polyethylene core sandwiched between two aluminum sheets. These panels are very versatile and can be used in many applications. The entire panel consists of 3 main layers. The top aluminum sheet is coated with either polyester or PVDF paint. The core is either normal polyethylene based or a fr (fire-resistant) core which is specially treated for fire resistance. The bottom aluminum sheet comes in either mill finish or if customers require we can provide a thin layer of polyester paint coat with (6~8um) backside paint
Chensheng series aluminum composite panel contain five large categories of interior wallboard, facade panel, wood panel, granite veins board and fireproof board. Chensheng aluminum composite panel adopted anti-rust alloy aluminum plate and high strength polyethylene core board of superior quality. External coating mode of panel is polyester resin or presently internationally most advanced polyester resin paintings dressing , it can stand the test of various kinds of powerful weather and keep its superior quality. Standard size: 1220(width) *2440(length) *3(thickness)mm 1220(width) *2440(length) *4(thickness)mm Special size: Thickness: 2mm, 5mm, 6mm Width: 1000mm, 1250mm, 1550mm Maximum length:6000mm. ACP application: Building exterior curtain walls Decoration of interior walls, display platforms Renovation and reconstruction of old buildings Billboard, signboards and advertisement boards Industrial materials and bodies of automobiles Balcony, fence, indoor compartments. In pallet/wooden case.
Cool goal panel is composed of a polyethylene (pe) core between two aluminum sheets, and coated with polyester resin or extra-durable PVDF (fluorocarbon) resin as a composite structure with excellent character such as fire proof, water proof, heat-insulated, sound-insulated and resistance against corrosion, pollution and wear. Standard size: 1220 (width) x2440 (length) x3 (thickness) mm 1220 (width) x2440 (length) x4 (thickness) mm Standard color: 30 kinds Special size: Thickness: 2mm, 5mm, 6mm Width: 1000mm, 1250mm, 1550mm Maximum length: not more than 6000mm. Application: --> wall curtain, cladding and facade --> roof edges and parapet wall --> dado, separation wall and partition --> advertising plate, showroom and shop front signing --> column covers and beam wraps.
4mm Thick Aluminium composite panel with PVDF coating Kynar 500 70:30. Palets of 100 sheets varies according to size.
