Please click here to check who's online and chat with them.

Find Verified Multifunction Transfer Peristaltic Liquid Pump Suppliers, Manufacturers and Wholesalers

Jun-23-21
 
1 This intelligent programmable Peristaltic Liquid Pump CT6000 can be installed by YZ1515x Peristaltic Pump Head..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in Englishand Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
Peristaltic Tube Pump Parameter
Model CT6000 Display Mode LCD
Speed Range 0.1-600 rpm Control Method touch screen+keypad
speed resolution 0.1 rpm Suckback angle 10~720 (1 Stepping)
Max Flow 0.007-2280ml/min Suchback speed 10-300 rpm
Filling Accuracy ±0.5% Motor Type Stepper motor
Environment Temperature 0-40 External control
Start & stop, direction control, speed control
( Analog control :0-5v, 0-10v, 4-20mA optionl )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol
Relatively Humidity
Jun-23-21
 
CR intelligent Peristaltic Dosing Pumps BT600LC-S with 4 work mode : transfer /timer /quantitative/timing quantitative
1. This intelligent programmable Peristaltic Tube Pump BT600LC can be installed by YZ1515x, YZ2515x, pump heads.
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of
flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.

Dosing Pump Technical Parameters

Speed Resolution : 0.1 rpm
Display Mode: Touch Screen
Four work Mode : Transport mode, Timer mode, Quantitative mode, Regular Quantitative Mode
Timing Range : 0.1s~9999min
Quantitative Range :0.001ml~9999L
Suction Angle : 10~720(1 stepping)
External Control : Start & stop, Direction, Speed ( 0-5V, 0-10V, 4-20mA, 0~10kHz )
Communication Protocol : RS485
Power Consumption :
Jul-21-21
 
Peristaltic pump CM1000/YZ1515X Flow range is 0.007~380ml/min/channel. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers. FULL SPEED button available for filling in & emptying out. Good capability price rate. Not suitable when used in the open air.
Jun-23-21
 
BT600FC-S is a intelligent flow rate bottle filling peristaltic pump specially used for filling, with 3.5 inch touch screen which is easy operate and intelligent. The intelligent flow rate bottle filling peristaltic pump BT600FC-S is very suitable for vial filling, can fill many kinds of liquid. The max flow rate is 6000ml/min. It can use pump head KZ25.

As a Vials Filling Peristaltic Pump, BT600FC-S Normally used in the fields such as Pharmaceutical filling peristaltic pump, Food filling pump, University laboratory, Water treatment pump , Cosmetic filling pump , Beverage filling pump, etc.

The Peristaltic Pump BT600FC-S is one of the most hot-selling models of CRPUMP, because there are many advantages such as the accuracy, handiness,easy-clean,ergonomic working, etc.

Except control it by the button, also support external control such as 0-5v, 0-10v,4-20mA, etc. Customers also can control thePeristaltic Liquid Pump by foot pedal. Support RS485 or RS232, just tell us which you want. There are professional R&D team which can customize according to customersâ?? requirement.
Jun-23-21
 
Micro Coolant Liquid Transfer Peristaltic Pump

This OEM Peristaltic Pump can work with AC220V synchronous motor
1.The TH15 Peristaltic Dosing Pumps have superb features built-in and flexible design to meet specific customer needs.
2.Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM Small Peristaltic Pump a good performance.

Application:
Environmental Protection Equipment,Discharge of flue gas analyzer,Delivery liquid into the fermentation tank
Basic Peristaltic Pump Functions and features

*A special part links the roller box with the motor shaft to ensures stable
*Snaps into the tube, not slippery silk, more fixture
*Crust use streamlined design, With card bit, easily snaps into the Peristaltic Liquid Pump
. Easy to change and fix the tubing. Occlusion can be adjusted slightly by ratchet wheel.
* Small size, compact and robust design
* Trouble-free continuous tube loading in seconds
* Reliable performance without any operator adjustments
* Safe and closed with visible rotor movement
* Spring-loaded operation for good pressure control
* 2 roller pump head, low pulsation
* Smooth, cog-free operation

Noted:Run clockwise can get large flow,and operation counterclockwise can get biger outlet pressure.
Load import tube or harder tube,please counterclockwise operation to increase the pressure tube torque.
3218 Multifunction Transfer Peristaltic Liquid Pump Suppliers
Short on time? Let Multifunction Transfer Peristaltic Liquid Pump sellers contact you.
Jun-25-21
 
The OEM Small Peristaltic Pump model OEM208/KZ25 with Compact structure design, simple installation design, and good working performance, widely used in various liquid processing equipment
Customize mounting brackets available. Ideal for fluid transfer applications
Jun-25-21
 
Pumping and dosing buffer solutions or other fluids are common tasks performed by laboratories worldwide. So the Laboratory Peristaltic Pumps are the necessary instruments. Making sure that liquids are transferred with high precision and remain free of contamination are key challenges in handling liquids using Peristaltic Liquid Pump. Moreover some pump designs, such as those containing valves, are prone to contamination or even jamming when handling certain fluid types such as viscous liquids or suspensions. This is why peristaltic tube Dosing Pump is increasingly becoming the first choice for laboratory tasked with dispensing different fluids.
Today,Dosing and Metering Pumps are used for numerous applications, from filling small vials to pumping concrete.
Jun-25-21
 
The OEM 202 tumescent infiltration liposuction transfer peristaltic pump have superb features built-in and flexible design to meet specific customer needs.Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM peristaltic pump powerful functions.

The OEM 202 Small Peristaltic Pump is widely used in liquid transfer.You will often find these Peristaltic Tube Pumps in vending machines, soft serve ice cream machines, printers, ink machines, e-liquid filling machine and other liquid transfer field.

With DC 12V/24V motor, the OEM Peristaltic Pump 202 can install 2 kinds of tubes to meet different flow requirements, can handle with sticky liquid.

The speed of OEM Peristaltic Pump can be customized, the shell of 12v Peristaltic Pump Head is made of PPS material and the roller is made of 304 SSS material, and the speed control function is optional.
Jul-01-21
 
Hose for fuel, lubricating oil
The characteristics of:
For the vast majority of oil and chemical products, not brittle no swelling.
Resistance to ozone and ultraviolet radiation
Suitable for delivery of gasoline , diesel, heating oil, cutting oil and glycol refrigerant compound
GOLD Member
VERIFIED
Jan-14-25
Supplier From Mumbai, Maharashtra, India
Jun-29-21
 
Glycerin/Oil/watter filling peristaltic dosing pump
Two kinds of operating modes, transferring and dispensing, can be switched freely, to ensure the quantitative distribution of the fluid.
Memory function available in case of power off and it will continue the work once the power was restarted.
Supports MODBUS communication protocol through the DB15 interface of the drive. And communication protocols customized is available.
Jul-01-21
 
CR peristaltic pump LG350M is a liquid constant transfer pump. that can run with KZ50 pump heads, with flow rate from 10-33000 ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V, and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.
Jul-21-21
 
Peristaltic Liquid Pump with Silicone Tubing. Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic PUMP type the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excellent choice for any MICRO liquid handling
Jul-01-21
 
1. CR peristaltic pump BT600FC can be installed by LP25-6 YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
Jun-25-21
 
The food grade filling liquid peristaltic pump tube's material is platinum vulcanized silicone.The Peristaltic Liquid Pump tube is extruded from special silica gel material through high temperature and high pressure, with smooth inner cavity and accurate size.The Peristaltic Metering Pump tube can meet the food hygiene, drug iodine, medical and other testing standards.It has the advantages of high abrasion resistance, high tear resistance, high resilience and so on.

How to select a Dosing Pump tube:

1. The best way to select a tube is that to decide which materials are chemically suitable at first, and then choose the one which best meets the physical demands of the application.
2. For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed.
3. Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed.
Jun-25-21
 
Milking Vending Machine OEM Peristaltic Pump product description

Our OEM Small Peristaltic Pump 204 model High quality mini DC Peristaltic Liquid Pump with speed regulator with flow rate up to 1740mL/min, transparent PC plastic shell. It is convenient for observing the work situation of Peristaltic Pump Head. The roller adopts 304 stainless steel, can work long time with high speed.

OEM Peristaltic Dosing Pumps Features:

*304SSS roller

*Transparency Peristaltic Pump Head,can check the liquid work status easily.

*With L bracket and installation screw holes ,easy to install.

*Support bracket customized,that means we can design and produce the suitable bracket to meet your installation requirement .

*The flow with silicon tube 24# can reach 1740 ml/min and the liquid based on water .

Noted: The thick liquid will cause the flow become slow
Jun-23-21
 
Milking Vending Machine OEM Peristaltic Pump product description

Our OEM Small Peristaltic Pump 204 model High quality mini DC Peristaltic Liquid Pump with speed regulator with flow rate up to 1740mL/min, transparent PC plastic shell. It is convenient for observing the work situation of Peristaltic Pump Head. The roller adopts 304 stainless steel, can work long time with high speed.

OEM Peristaltic Dosing Pumps Features:

*304SSS roller

*Transparency Peristaltic Pump Head,can check the liquid work status easily.

*With L bracket and installation screw holes ,easy to install.

*Support bracket customized,that means we can design and produce the suitable bracket to meet your installation requirement .

*The flow with silicon tube 24# can reach 1740 ml/min and the liquid based on water .

Noted: The thick liquid will cause the flow become slow
GOLD Member
VERIFIED
Oct-25-20
 
V3 Borewell Submersible Pumpset

Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
 
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
GOLD Member
VERIFIED
Oct-25-20
 
V4 Borewell Submersible Pumpset
Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410.

Pump Liquids
- Clean
- Thin
- Non-Aggressive
- Non-Explosive
- Clear
- Cold
- Fresh water
- Without abrasives
- Solid particles.

Salient Features
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and
Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.

Specification
Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply.
Single Phase available in 0.5 HP to 5.0 HP
Three Phase available in 1.0 HP to 6.0 HP
- Speed : 2880 RPM
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0
- Degree of Protection : IP 58
- Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs,
2.2kW, 7.5 kW -1500 lbs.
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph
Direct Online (D.O.L)
- Maximum Starts Per Hour : 20 Times
3218 Multifunction Transfer Peristaltic Liquid Pump Suppliers
Short on time? Let Multifunction Transfer Peristaltic Liquid Pump sellers contact you.