Multidrop Combi nL Reagent Dispenser, 50nL to 50 uL The Combi nL is a nano- to microvolume bulk reagent dispenser with a volume range of 50nL to 50uL. Key Features: Offers low volume dispensing for volumes 50nL -50L into 96-, 384- and 1536-well plates Results in high quality assay data Increased flexibility dispensing repeatably into plates with variable height allowing the user to fill either rows, columns, or wells with the easy to use FILLit Software Effortless dispensing the visual, icon-based onboard user interface makes all functions easy to set tup, use, and maintain Reduced reagent costs low volume dispensing, a minimal dead volume and the backflush function minimize the use of expensive reagents High throughput fast dispensing combined with full robotic compatibility ensures increased assay throughput for laboratories needing low volume assay formats Recommended for: Assay development; Primary and secondary screening; Genomics and proteomics research; PCR set-up; Sequencing set-up; Cell based assays
Leading manufacturer and exporter of Sodium Acetate Anhydrous (EP/LR Grade), Sodium Acetate Anhydrous (AR/GR/ACS Grade) and Sodium Acetate Anhydrous (Tech). Application: Sodium acetate is used in the textile industry to neutralize sulfuric acid waste streams, and as a photo resist while using aniline dyes. Sodium acetate is also used in consumer heating pads or hand warmers and is also used in hot ice Sodium acetate is used to reduce the damage water can potentially do to concrete by acting as a Concrete sealant, while also being environmentally benign and cheaper than the epoxy alternative that is usually employed for sealing concrete against water permeation Sodium acetate used in chemical/pharmaceutical synthesis and dispensation as a middle and as a buffering go-between. Sodium acetate used in bronzing industry as washing salts. Sodium acetate used in plating as a reagent. Sodium acetate used in lithography and dyeing of textiles as a mordant. Sodium acetate used in taking pictures to deceleration of colour photographs. Sodium acetate anhydrous is also used as laboratory reagent, laboratory chemical Packing:25 kg PP bag with LDPE liner inside / 500 kg and 1000 kg Jumbo bag.
Leading manufacturer and exporter of Sodium Acetate Anhydrous (EP/LR Grade), Sodium Acetate Anhydrous (AR/GR/ACS Grade) and Sodium Acetate Anhydrous (Tech). Specifications : Product Name : Sodium Acetate Anhydrous CAS No. 127-09-3 Color & Physical Form White Coarse Powder Active Ingredient CH3COONa Assay Min. 99% Molecular Wt. 82.03 pH (5 % w/v water) 7.5 - 9.2 Chloride NMT 0.002% Sulphates NMT 0.01% Heavy Metal (as Pb) NMT 0.002% Loss on Drying NMT 1% Application: Sodium acetate is used in the textile industry to neutralize sulfuric acid waste streams, and as a photo resist while using aniline dyes. Sodium acetate is also used in consumer heating pads or hand warmers and is also used in hot ice Sodium acetate is used to reduce the damage water can potentially do to concrete by acting as a Concrete sealant, while also being environmentally benign and cheaper than the epoxy alternative that is usually employed for sealing concrete against water permeation Sodium acetate used in chemical/pharmaceutical synthesis and dispensation as a middle and as a buffering go-between. Sodium acetate used in bronzing industry as washing salts. Sodium acetate used in plating as a reagent. Sodium acetate used in lithography and dyeing of textiles as a mordant. Sodium acetate used in taking pictures to deceleration of colour photographs. Sodium acetate anhydrous is also used as laboratory reagent, laboratory chemical Packing:25 kg PP bag with LDPE liner inside / 500 kg and 1000 kg Jumbo bag
Intended Use The One Step HAV IgG/IgM Test is a rapid chromatographic immunoassay for the qualitative detection of antibodies (IgG and IgM) to Hepatitis A Virus (HAV) in Whole Blood /Serum / Plasma to aid in the diagnosis of Hepatitis A Virus. Summary Hepatitis A is an acute, usually self-limiting disease of the liver caused by hepatitis A virus (HAV). HAV is transmitted from person to person, primarily by the faecal-oral route. The incidence of hepatitis A is closely related to socioeconomic development, and seroepidemiological studies show that prevalence of anti-HAV antibodies in the general population varies from 15% to close to 100% in different parts of the world. One step HAV IgG/IgM Test is a simple, visual qualitative test that detects Hepatitis A Virus antibodies in human Whole Blood /Serum / Plasma. The test is based on immunochromatography and can give a result within 15 minutes. Principle The One Step HAV IgG/IgM Test is a qualitative membrane strip based immunoassay for the detection of Hepatitis A Virus antibodies (IgG and IgM) in Whole Blood /Serum / Plasma. The test device consists of: 1) a burgundy colored conjugate pad containing HAV recombinant envelope antigens conjugated with Colloid gold (HAV conjugates) and rabbit IgG-gold conjugates,2) a nitrocellulose membrane strip containing two test bands (T1 and T2 bands) and a control band (C band). The T1 band is pre-coated with the antibody for the detection of IgM anti-HAV, T2 band is coated with antibody for the detection of IgG anti-HAV, and the C band is pre-coated with goat anti rabbit IgG. When an adequate volume of test specimen is dispensed into the sample well of the test cassette, the specimen migrates by capillary action across the cassette. IgG anti-HAV, if present in the specimen, will bind to the HAV conjugates. The immunocomplex is then captured by the reagent pre-coated on the T2 band, forming a burgundy colored T2 band, indicating a HAV IgG positive test result and suggesting a recent or repeat infection. IgM anti-HAV if present in the specimen will bind to the HAV conjugates. The immunocomplex is then captured by the reagent coated on the T1 band, forming a burgundy colored T1 band, indicating a HAV IgM positive test result and suggesting a fresh infection. Absence of any T bands (T1 and T2) suggests a negative result. The test contains an internal control (C band) which should exhibit a burgundy colored band of the immunocomplex of goat anti rabbit IgG/rabbit IgG-gold conjugate regardless of the color development on any of the T bands. Otherwise, the test result is invalid and the specimen must be retested with another device. Storage and Stability Store as packaged in the sealed pouch at room temperature or refrigerated (4-30 or 40-86). The test device is stable through the expiration date printed on the sealed pouch. The test must remain in the sealed pouch until use.
INTENDED USE The One Step RV IgG/IgM Test is a rapid chromatographic immunoassay for the qualitative detection of antibodies (IgG and IgM) to Rubella (Virus) in Whole Blood /Serum / Plasma to aid in the diagnosis of RV infection. The test is based on immunochromatography and can give a result within 15 minutes. PRINCIPLE The One Step RV IgG/IgM Test is a qualitative membrane strip based immunoassay for the detection of RV antibodies (IgG and IgM) in Whole Blood /Serum / Plasma. The test device consists of: 1) a burgundy colored conjugate pad containing RV recombinant envelope antigens conjugated with Colloid gold (RV conjugates) and rabbit IgG-gold conjugates,2) a nitrocellulose membrane strip containing two test bands (T1 and T2 bands) and a control band (C band). The T1 band is pre-coated with the antibody for the detection of IgM anti-RV, T2 band is coated with antibody for the detection of IgG anti-RV, and the C band is pre-coated with goat anti rabbit IgG. When an adequate volume of test specimen is dispensed into the sample well of the test cassette, the specimen migrates by capillary action across the cassette. IgG anti-RV, if present in the specimen, will bind to the RV conjugates. The immunocomplex is then captured by the reagent pre-coated on the T2 band, forming a burgundy colored T2 band, indicating a RV IgG positive test result and suggesting a recent or repeat infection. IgM anti-RV if present in the specimen will bind to the RV conjugates. The immunocomplex is then captured by the reagent coated on the T1 band, forming a burgundy colored T1 band, indicating a RV IgM positive test result and suggesting a fresh infection. Absence of any T bands (T1 and T2) suggests a negative result. The test contains an internal control (C band) which should exhibit a burgundy colored band of the immunocomplex of goat anti rabbit IgG/rabbit IgG-gold conjugate regardless of the color development on any of the T bands. Otherwise, the test result is invalid and the specimen must be retested with another device. Storage and Stability Store as packaged in the sealed pouch at room temperature or refrigerated (4-30â?? or 40-86â??). The test device is stable through the expiration date printed on the sealed pouch. The test must remain in the sealed pouch until use.
Uncut Sheet H. Pylori (H.P)Ab Rapid Test Package:30sheets/pouch Specimen:Whole Blood/Specimen/Serum INTRODUCTION One Step H. Pylori Ab wb /serum/plasma test is a rapid test for the qualitative detection of antibodies specific to Helicobacter pylori in human serum/plasma and whole blood. In this test kit, the H. pylori antigen â?? colloid gold conjugate and specimen moves along the membrane chromatographically to the test region and forms a visible line as the antigenantibodyantigen gold particle complex forms with high degree of sensitivity and specificity. This one step test only takes about 1015 minutes. Test results are read visually without any instrumentation. SPECIMEN COLLECTION & PREPARATION Both whole blood (with or without anticoagulant), serum and plasma specimens can be used with this assay. Simply follow the standard clinical produres to collect whole blood, serum or plasma specimens. If the specimen cannot be tested on the day of collection, store the serum/plasma specimen in a temperature of 28 ºC for up to 72 hours. Stir and bring the specimens to room temperature before testing. Do not freeze whole blood specimens. Do not freeze and thaw the specimen repeatedly. Attention: Specimens and all materials coming in contact with them should be handling and disposed of as if capable of transmitting infection. Avoid contact with skin by wearing gloves and proper laboratory attire. REAGENTS AND MATERIALS SUPPLIED 1. Test kit 2. Specimen diluents in dropper bottle 3. Plastic dropper to dispense sample
Scientific Glass Pilot Plant, Chemical Reaction Distillation Unit, Chiller, Oil Bath, Ptfe Stirrer, Rotary Film Evoparator, Sight View Glass, Flask, Jecketed Vessel, Heat Exchanger, Shell And Tube, Glass Valves Stop Cock, Xstrong Flanges.
Laboratory Refrigerator , Medical Freezer , Water Cooler , Water Dispenser , Electrical Combi , Central Heating , Medical Warming Cabinet , Medical Warmer , Blanket Warmer , Fluid Warmer , pharmacy refrigerator.
Product advantageo 1&161;¡émachine is made of 304 stainless steel, according with medical health standard. Electrical parts adopt imported brand accessories, with long-life length and good quality performing. 2. Multi-functional. Machine is suitable for dispensing different kinds of reagent (edta, clot activator, lithium, fluoride etc.) dispensing method: spray or filling liquid; filling reagent range: 5&161;a500ul; dosing precision: &161;¨5%; suitable tube size for filling: &190;5mm 3&161;¡énon-contact dosing principle: volume control valve is non-contacting with reagent. The advantage is: filling different reagent will not cause cross affection. Machine is easy for cleaning. 4. Mixing function: adopting magnetic stirring method, the mixing part is not contacting with the reagent, avoiding cross affection. The mixing device makes the floating reagent or particles remaining evenly, avoiding the reagent concentration deviation. 5. High precision of the nozzles dispensing, easy for cleaning. The nozzle is designed according to the advantage of efd nozzles and traditional nozzles, with high precision and easier maintenance. The nozzle is separable designed, convenient for cleaning. If the nozzle is blocked, just changing the nozzle needles and nozzle can be using again. Main parameter Input powerAc220v Input air pressure0.2-0.4mpa Machine power100wReagent vessel pressure&188;100kpa Dosing range5-500ul Dosing precision&161;¨5£ Production efficiency&190;10000pcs/h Mixing modeMagnetic stirring Wooden case packing
long-lasting 304 Cr-Ni and painted galvanized steel outer surface. Water Dispensers has 50 liter and 80 liter welded inner chamber which can be changed. Polyurethane insulated cover. Heat loss is minimized with injection printed polyurethane insulation. It has float feed system which can be connected to water supply or dispenser size bottled water. Water temperature can be easy controlled by Manuel thermostat. Installation can be made easily by adjustable ball joint foot system. It has long-lasting push-in tap system. All water dispensers have 2 years warranty. EMSAS A.S. has ISO 9001:2015, CE. Treatment installation can be made easily.
161;244;tube loading161;adust absorption161;atube reverse checking--reagent dosing( spray/filling)161;adrying system161;aautomatic adding cap161;avacuum capping161;apick up tubes onto foam rack161;atest tube tray recycling system; all the above steps automatically finished online. Main technical parameter¡o 1. Suitable specification tube¡o13*75mm, 13*100mm pet tube/ glass tube; for 16*100mm tube, only by changing some accessories. 2. Caps: round, flat shape caps can be used in same line. 3. Reagent dispensing nozzles¡o2 nozzles (nordson efd) 4. Filling or spraying precision: 161; 5. Vacuum precision: 161;¨ 6. Drying stations¡o4 stations 7. Production capacity: 16000pcs/hour. 8. Air pressure¡o0.8mpa 9. Air consumption¡o20m3/h 10.Power¡oac380v 50/60hz 11.Power consumption¡o15kw Wooden box packing
MultiPROBE Small Conductive, Non-Sterile Tips Perkin Elmer We offer sterile and non-sterile tips for a variety of dispenser channel sizes and volume requirements. Tips to support liquid transfers from multiple laboratory containers including test tubes, vials, troughs, deep-well plates and microplates (up to 384-well) are available as well. Our portfolio of consumables includes both cell-based and biochemical assay platforms, reagents and kits, as well as a complete range of high quality and application-focused microplates for your assay applications, detection technologies, or plate reader requirements. Our Conductive Tips for the Varispan Arm provide liquid level sensing and are available in ten 96-tip racks/case.
Perkin Elmer RoboRack 175ul Conductive Filter Tips, Sterile We offer sterile and non-sterile tips for a variety of dispenser channel sizes and volume requirements. Tips to support liquid transfers from multiple laboratory containers including test tubes, vials, troughs, deep-well plates and microplates (up to 384-well) are available as well. Our portfolio of consumables includes both cell-based and biochemical assay platforms, reagents and kits, as well as a complete range of high quality and application-focused microplates for your assay applications, detection technologies, or plate reader requirements. Our Conductive Aerosol Barrier RoboRack MPII disposable tips for use with MultiPROBE II VersaTip Plus adapters are available in popular sizes in standard format for conventional liquid sample processing, sterile, provide liquid level sensing, and are available in ten 96-tip RoboRacks per case.
Product Description Deshengxin dispensing booth for pharmaceutical Conduct dust, reagent weighing in equipment, packaging, can control dust, reagent spills, prevent dust inhalation hazard to human being, also avoid dust, reagents cross contamination, protecting the external environment and interior personnel security. The operation area of the weighing booth is in one thousand clean class vertical flow area matched ISO6 (NF, EN, ISO14644-1) protection. Weighing room is a professional purification equipment using for sampling, weighing and analyzing to control of dust pollution. The indoor air would go through prefilter, medium efficiency filter and then draw in plenum chamber by centrifugal fan. Next the air would go through HEPA filter and blowout. The clean air will flow into the clean area with average velocity to provide clean working environment. The operation area of Center Weighing Room will maintain the negative pressure and blow out10% recycling air. Features 1.Automatic changeable frequency system monitors the air velocity to ensure its stability in the work area. 2.Unique designed air duct effectively controls the noise. 3.Differential pressure gauge is equipped to real-time monitor the filters. 4.Uniform flow design of main working area can protects the operators and prevent environmental pollution and cross contaminationof products. 5.Intelligent control mode and alarm system ensure the reliability of running. 6.Smooth transitions of wall and ground can eliminate the blind angle. 7.Customized design is welcome. FAQ Q: Are you manufacturer or trading company? A: We are manufacturer for clean room equipment, we have plant in Jiangsu Q: What's your product? A: We specialty in manufacturing clean room equipment and filters, and then the accessory for clean room equipment. Q:How about your after sale service? A:We will reply you within 24hours by email or phone. If we have local agent,we will arrange him to your site within 24 hours to assist you to shoot the problem. Q:Can you arrange the visit to your user?Can you customized the machine according to our requirements? A:Yes,Of course.
Perkin Elmer Automated Workstation Tips 900 ul Filter Tip, Clear We offer sterile and non-sterile tips for a variety of dispenser channel sizes and volume requirements. Tips to support liquid transfers from multiple laboratory containers including test tubes, vials, troughs, deep-well plates, and microplates (up to 384-well) are available as well. Our portfolio of consumables includes both cell-based and biochemical assay platforms, reagents, and kits, as well as a complete range of high quality and application-focused microplates for your assay applications, detection technologies, or plate reader requirements. Our Clear MBP Tips for the Varispan Arm provide liquid level sensing and are available in ten 96-tip racks/case. Specifications Automation Compatible Yes Color - Clear Disposable Tip Types - clear, non-sterile Pipetting Arms - Varispan Product Brand Name - JANUS Quantity in a Package Amount - 10.0 Units Unit Size - 900 ul Volume Capacity - 900 L
Histopathology instruments, consumables and reagents like wax dispenser, wax trimmer, water bath, slide dryer, cold plate, nebulizer, medical paraffin wax, microscope slide, slide cover and emnedding cassettes as well as reagents..
