Mpo Mtp Connector Interface Patchcord Suppliers and Manufacturers

The MPO / MTP patchcords are simplex multi-fiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. They offer Male and Female MPO / MTP connectors on each end. Available in 4~48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.

MPO to MPO Gigabit 12-pin jumper Features: Connector Type: MPO multi-mode connector Cable type: 12-core multi-mode OM3, 50/125, outside diameter 2.5*4.6MM Insertion loss: less than or equal to 0.7dB Interchangeability: less than or equal to 0.2dB Repeatability: less than or equal to 0.2dB Operating temperature: -20 degrees to +70 degrees Storage temperature: -40 degrees to +70 degrees 2 Applications Optical fiber communication system Fiber optic data transmission Local area network (LAN) Fiber CATV 3 cable color Aqua.

1,suit for data center 2,singler mode and multimode 3,PC or APC 4,Operating Temperature(-40 to +80C) 4,Different IN index and various color available 5,Stable Performance index by PIN fixed position of connection 6,4,8,12...72 cores for one connector available 7,maximun cab be 288 cores each patch cord 8,Plug type connector with locking structure 9,High density which convenient for wiring and management system 10,Comply with Telcordi GR-1435-CORE and IEC standard

Combining 12~144 fiber trunk cable with 12F MPO/MTP and generic connectors, Gigalight;trunk cable assemblies contain MPO to MPO and MPO hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. Customized configurable to precise application requirements, these reels or pulling eye are efficiently put high-performance, high-density fiber connections exactly where you need them.

MPO/MTP 8 Core 0.9mm Singlemode Fanout Assembly fiber optic patch cord MPO/MTP female -LC 0.9mm Nokoxinâ??s MPO/MTP 0.9mm Fanout Cable are designed to high density multi-fibers solutions, it designed to use fan -out kit convert to standard connectors. One side use MTP/ MPO high density multi-fiber connector and the other side usually with LC/SC/FC/MTRJ/E2000 and so on.It fit for dif-ferent installation environment and easy to install between 40/100G optical module equipment, data centers and buildings. Our cables are 100% factory tested and can meet your special requirements. All the MTP/MPO connector compliance with Telcordia GR-1435-Core Compliant. Features: .* MTP and MPO are available * High performance in IL&RL *100% pre-terminated tested * Pulling eye design easy for cabling

Optical mpo connector Features: Low insertion loss, High return loss, Core 4, 8 and 12 terminal connection, Compact size, 100% under indoor qualified test. Application: Catv network; telecommunication; ftth; lan network.

Fiber Cables, Patchcords, Pigtails, Adapters, Connectors, WDM, CWDM, FWDM, MTP/MPO Solutions, FTTH, Datacenter.Research and Development

MTP/MPO Cassette Modules provide secure transition between MTP/MPO and LC or SC discrete connectors. They are used to interconnect MTP/MPO backbones with LC or SC patching. Modular system allows for rapid deployment of high density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19” multislot chassis. Feature Space saving design Provide narrow solution for high density application High performance and reliability Save installation time and labor Available in 12 fiber and 24 fiber configurations Application Data center Storage area network Infiniband Optical switch and router Emerging 40Gbps and 100Gbps protocols

We offer high quality connectors, the feature of the connectors are as follow: 1. Ceramic ferrule in PC,APC, UPC polishing 2. Easy assembly, meet Telcordia, ANSL, IEC, JIS standard 3. Low insertion loss and ultra low back reflection 4. Meet high precision requirement and has stable performance Application: 1.CATV system 2.Fiber optic telecommunication 3.Optical network equipment 4.High speed transmission system Technical Data Insertion loss:í_0.2dB Durability: 1000 cycles at 0.2dB Max Operating Temperature: -40~+85 Storage Temperature: -40~+85

Fiber type single mode multimode Insertion loss 161; 220;0.20db , 0.25db Return loss ¡Ý50db (pc) ¡Ý65db(apc) Repeatability ¡Ü0.1db Durability ¡Ü0.1db typical change, 500 matings Interchangeability: ¡Ü0.2db Operating temperature: -40 to +80 degrees celsius

Fiber-optic connector Fiber Mode SM MM Type FC SC ST LCMUMT-RJ Exchangeability (dB) f_0.20 Repeatability (dB) f_0.10 Operating Temperature -40 to+75 Storage Temperature -40 to +85

Model Gf-connector-1 Gf-connector-1 Body Brass Gold plated Inner conductor Beryllium or tin bronze Gold plated Resilient contact Beryllium-copper Gold plated Insulator Ptfe Crimp ferrule Copper alloy Nickel or gold plated O-ring sealing 6146 silicone rubber 100per/bag

LC(Stands for Lucent Connectors) fiber optic connector, which now also widely used in fiber optic device and telecommunications. LC connectors' shape similar with SC fiber optic connector, but the size only half of SC fiber connector. SC fiber connector use 2.5 mm ferrule, while the LC connectors use 1.25 mm ferrule. Lucent Technologies first developed the LC connector for use in Telcoenviroments. Sophenol supply both singlemode and multimode LC optical fiber connectors. Which includes singlemode LC UPC connector, singlemode LC APC connector and multimode LC UPC connector, simplex or duplex versions are available. Together with related LC fiber products, such as LC fiber optic adaptor/adapter, LC attenuators and LC cable assemblies. These products are suitable to use in multimedia, industrial and military applications. Features: Low insertion loss Corrosion resistant body Push & pull mechanism like RJ connectors Half size of a regular fiber connectors Precision mechanical dimension Meets Telecordia-GR-326-CORE For 3.0mm, 2.0mm jacket or 900um buffer ROHS compliant Specifications: Insertion loss: 0.20dB Return loss: >55dB (UPC) Fiber compatibility: 9/125um single mode Connectors type: LC Duplex Applications: CATV Active device termination Test equipment Local Area Networks (LANs) Telecommunication networks Data processing networks Wide Area Networks (WANs)

Originally designed in 1958 and known by a different name, it was not until 1968 that the SMA, after being incorporated into MIL-C-39012, became known as the SubMiniature A. Then and now, SMA's compact design, high durability and outstanding electronic performance have made it one of the most widely used connectors in RF and Microwave applications across the board. Normally utilized in frequency ranges from DC-18 GHz, there are also precision versions that can reach as high as 26.5 GHz. SMA is a 50 ohm impedance connector with a threaded interface for increased reliability and is suitable for a vast range of applications. It is also available in Reverse Polarity (RP) versions, where the male and female interface is switched.

Optical fiber connector, patch cord, attenuator, coupler, PLC splitter, CWDM, DWDM, OADM, MPO, MTP module, media converter.

1.Various type for choice Other connectors: 9 pines, 15pines, 25 pines, 37pines High density: 15pines, 26pines, 44pines, 50pines, 62pines, 78pines, 104pines 2.Application Broadcast Computer interface devices Medical equipment Military/aerospace Telecommunications Cable Main borad Digital devices Communication equipment Machinery equipment High-speed railway, Industrial control equipment, Large mechanical 3.Contact type (male/female) Wire solder type Pcb mounting straight Pcb mounting right angle Straight wire wrap type Individual pin crimp housing Idc type 4.Why chose adam tech? 1.Since from 2003 2.Professional connector manufacturer 3.Oem/odm experience( cooperation brand ) 5.Contact us Dongguan adam electronic technology co., ltd. Tel:86-769-85449884 fax:86-769-85449885 Website: http://www.Adamtech.Net.Cn/ No. 29, fuxing road, fuxing industrial area, xiagang district, chang'an town , dongguan, guangdong, china Office Tel:86-769-85449884 Fax:86-769-85449885 Mon-fri 8.Am-12.Am 1.30pm-8.Pm Amy:sale002(at)adamtech.Net.Cn 35*25*25cm

1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 511Ã?32BIT; Receive FIFO: (1M-1)Ã?32BIT; General Specifications: External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mmÃ?100mmÃ?4HP, tolerance

1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 511Ã?32BIT; Receive FIFO: (1M-1)Ã?32BIT; General Specifications: External dimensions (LÃ?WÃ?H): Standard PXI/CPCI3U card 160mm100mm 4HP, tolerance

1. 8 channels of sending, 8 channels of reception; 2. Receive and add current system time; 3. Timing transmission and data can be updated at any time; 4. Receive labeled filtering and interrupt receiving; 5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K; 6. FIFO reset function of sending and receiving, set to receive enable signal; 7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) 32BIT 8. Standard ARINC429 data format, receiving and sending can be set separately; Product Description: ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations. Performance Parameters: Quantity of Transmitting channel: 8; Quantity of receiving channel: 8; Baud rate: 10K/12 5K/48K150K/100K/150K; Send FIFO: 51132BIT; Receive FIFO: (1M-1)32BIT; General Specifications: External dimensions (LWH): Standard PXI/CPCI3U card 160mm100mm4HP, tolerance